Originally Posted by DeadLink
I need exact, and at the closest points to the holes, rough numbers simply wont work please. With everything removed from the bottom of the case for example.
On the bottom, from the lower border of the lower screw to the raised area: 40mm exactly.
I can´t tell you the distance without that area as it´s part of the case.
Gleniu have removed it, maybe he can give you that measurement althought it would requiere modding to get what he has.
The rad you mention is 60mm thick so it will get into the raised area, and you will need to put the first row of fans outside the case as there is only a little bit more than 60mm from the front to the first "vertical" piece holding the first hot swat bay.... That or cut off the raised area an obtain some mm more in height and a lot of cm more in deept xD
On the top, from the top border of the highes screw to the top of the case: at least 25mm.
Less than 5mm more due my rule has some milmeters before 0... I can´t give you a good measurement here, sorry.