Originally Posted by DeadLink
So in any of the guys who own the case and their better judgement. Could you have say a 10.5" Gfx card with a Push/Pull with 30mm radiator in front?
I have a 770 ACX, I think it´s 10 inches long.
Currently in front H100i (25mm) and 1 set of fans (another 25mm)
I could fit a second row of fans inside and still use the gpu but I would need to run the power cable vertical to the top or to the bottom, there wouldn´t be enough space to fit them tough the cable management holes intended for this cables.
I don´t know about a 10,5" card, I would say yes, but anyway you could use up to a 45mm rad in pull/push if you put the first row of fans outside the case (between the case and the fan gril). This would requiere to remove the dust filter or switch it by a thinner one like a demciflex.
I can´t tell you about the one in the bottom as I can´t take measurements with the computer on, but about the PSU...
There a small problem using a filter there; the right side panel gate closes touching the back border of the chasis so the filter would keep off closing the door.
An easy fix for this would be to go directly to demciflex and order a custom size fan filter from the same size of your PSU, and then stick it directly on the PSU instead of using it on the case. You won´t have any issues with that.