Overclock.net › Forums › AMD › AMD CPUs › Overclocking my Fx6300, Going Really well but need more advice on voltages.
New Posts  All Forums:Forum Nav:

Overclocking my Fx6300, Going Really well but need more advice on voltages.

post #1 of 5
Thread Starter 
Running on This board;

http://www.newegg.ca/Product/Product.aspx?Item=N82E16813128514






And those are the two relevant Bios screens.

Temps and performance seems spot on, amazing actually first try to 4.6ghz, with;

+0.200 CPU voltage
+0.050 NB Core
1.175 NB Voltage

And 2200 NB frequency, with Ram under XMP 1600mhz.

I was doing intel burn tests at 1024mb, and only clocking in at a stable low 38C on my H60. Noise wise which is more the comfortable.
My goal is to stably overclock around there but I was having some Strange issues I definitely wasn't use to.

- My internet was all the suddenly intermittent and hiccuping like crazy, many things were having problems connecting, but it would turn on and off/Reset to default 3.5ghz and everythings fine now.
-Windows Experience index failed to run, said it couldn't load the Video test or something along that nature.
- Core voltages seemed a little inconsistent while doing burns, at least at lower clocks I tried like 4.3ghz etc (32C loaded... lol)


This is being cooled in my Corsair 300R, and by my single fan H60 xD... so from sounds of other peoples overclocks this is running extremely cool, under normal conditions it only hits 25C peak.
Aspirance
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Asrock Extreme7 Gen3 6950 PCS+ Vortex II Tri-CF(3) 16GB Corsair Vengeance 1600 
Hard DriveOptical DriveOSMonitor
WD 1TB (S2) + 60GB Main(S3) + 32GB Cache(S2) Samsung DVDR Lightscribe Windows 7 64bit Ultimate 2x LG 23" 1x Dell Pro 23" (Eyefinity!) 
KeyboardPowerCaseMouse
Logitech G15 Gen II Corsair 850HX + 600V2 HAF 932 (Custom Modded) Logitech G7 
Mouse Pad
Dell XPS 
  hide details  
Reply
Aspirance
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Asrock Extreme7 Gen3 6950 PCS+ Vortex II Tri-CF(3) 16GB Corsair Vengeance 1600 
Hard DriveOptical DriveOSMonitor
WD 1TB (S2) + 60GB Main(S3) + 32GB Cache(S2) Samsung DVDR Lightscribe Windows 7 64bit Ultimate 2x LG 23" 1x Dell Pro 23" (Eyefinity!) 
KeyboardPowerCaseMouse
Logitech G15 Gen II Corsair 850HX + 600V2 HAF 932 (Custom Modded) Logitech G7 
Mouse Pad
Dell XPS 
  hide details  
Reply
post #2 of 5
I dont think you mean internet, more like flashhplayer movies, its the NB bump the volts up a bit. I had the same issue for months, till i finally figured it out this week. If i dropped the NB multi to keep it below 2200 it was fine soon as i went over, you tube videos would stutter, my Pc tv tuner display would do odd things though my flight sim was happy. NB doesnt appear to do much as far as i can see, unlike the old 1090t etc.
post #3 of 5
Thread Starter 
I mean internet, no webpages would load tried loading into a few games it was extremely hiccupy. Could watch my steam downloads go up and down pulsing few seconds on and off
Aspirance
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Asrock Extreme7 Gen3 6950 PCS+ Vortex II Tri-CF(3) 16GB Corsair Vengeance 1600 
Hard DriveOptical DriveOSMonitor
WD 1TB (S2) + 60GB Main(S3) + 32GB Cache(S2) Samsung DVDR Lightscribe Windows 7 64bit Ultimate 2x LG 23" 1x Dell Pro 23" (Eyefinity!) 
KeyboardPowerCaseMouse
Logitech G15 Gen II Corsair 850HX + 600V2 HAF 932 (Custom Modded) Logitech G7 
Mouse Pad
Dell XPS 
  hide details  
Reply
Aspirance
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Asrock Extreme7 Gen3 6950 PCS+ Vortex II Tri-CF(3) 16GB Corsair Vengeance 1600 
Hard DriveOptical DriveOSMonitor
WD 1TB (S2) + 60GB Main(S3) + 32GB Cache(S2) Samsung DVDR Lightscribe Windows 7 64bit Ultimate 2x LG 23" 1x Dell Pro 23" (Eyefinity!) 
KeyboardPowerCaseMouse
Logitech G15 Gen II Corsair 850HX + 600V2 HAF 932 (Custom Modded) Logitech G7 
Mouse Pad
Dell XPS 
  hide details  
Reply
post #4 of 5
Have CPU volts at 1.475 for 4.6 Gig, try bumping up NB voltage not CPU nb , to 1.185 or so
post #5 of 5
Thread Starter 
CPU voltage was steady around 1.425 at 4.6, but its difficult for me to tell the voltage since bloody gigabyte had to use a addition system which isn't bad just hard to see what some of the real time voltages are.


And is that NB Voltage or Core? I imagine voltage, and or what should I have Core clocked to?
Aspirance
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Asrock Extreme7 Gen3 6950 PCS+ Vortex II Tri-CF(3) 16GB Corsair Vengeance 1600 
Hard DriveOptical DriveOSMonitor
WD 1TB (S2) + 60GB Main(S3) + 32GB Cache(S2) Samsung DVDR Lightscribe Windows 7 64bit Ultimate 2x LG 23" 1x Dell Pro 23" (Eyefinity!) 
KeyboardPowerCaseMouse
Logitech G15 Gen II Corsair 850HX + 600V2 HAF 932 (Custom Modded) Logitech G7 
Mouse Pad
Dell XPS 
  hide details  
Reply
Aspirance
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Asrock Extreme7 Gen3 6950 PCS+ Vortex II Tri-CF(3) 16GB Corsair Vengeance 1600 
Hard DriveOptical DriveOSMonitor
WD 1TB (S2) + 60GB Main(S3) + 32GB Cache(S2) Samsung DVDR Lightscribe Windows 7 64bit Ultimate 2x LG 23" 1x Dell Pro 23" (Eyefinity!) 
KeyboardPowerCaseMouse
Logitech G15 Gen II Corsair 850HX + 600V2 HAF 932 (Custom Modded) Logitech G7 
Mouse Pad
Dell XPS 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
  • Overclocking my Fx6300, Going Really well but need more advice on voltages.
Overclock.net › Forums › AMD › AMD CPUs › Overclocking my Fx6300, Going Really well but need more advice on voltages.