Overclock.net › Forums › Cooling › Water Cooling › Help mounting tube res in my case.
New Posts  All Forums:Forum Nav:

Help mounting tube res in my case.

post #1 of 2
Thread Starter 
Hey I'm going to be rearranging my loop sometime this week when my compression fitting arrive and I was wonder how you guys mount you tube res's to the motherboard tray in your cases. I have a 900D and a bitspower 250m tube res. Currently I have it mounted to one of my extra hdd cages because they holes were perfect for it but I plan on removing one of them so that will cause issues in the future. Any tips and know how are appreciated. Thanks.
post #2 of 2
I used a simple drill and made some holes for the little "C" mount things for my FrozenQ tube reservoir. They have a bolt that goes through them and then I just tighten a nut on the other end of the bolt, on the other side of the motherboard tray. I'm not familiar with how your specific reservoir is attached though.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Help mounting tube res in my case.