Overclock.net › Forums › Case Mods & Cases › Computer Cases › Back I/O not completely alligned
New Posts  All Forums:Forum Nav:

Back I/O not completely alligned

post #1 of 3
Thread Starter 
Back I/O not completely lined up? I have a Fractal Design Define R4 and a Sabertooth Z87 motherboard. Everything looks lined up except the audio jack are a little off centered but still fit through the hole. This motherboard has a back plate, not sure if that is why. If I press down semi hard on the motherboard it will be exactly centered but as soon as I remove my palm it looks slightly off. I screwed down the motherboard tray as low as possible.
Edited by d0nch1ch1o - 7/1/13 at 3:47pm
post #2 of 3
It's nothing to worry about. I've lost count of how many builds I've done and the I/O shield has never been perfectly aligned with the ports on the motherboard on any of them. As long as the ports fit through the I/O shield it's all good. thumb.gif
post #3 of 3
Thread Starter 
I'm not sure if its the reason why the video card is also a tight fit though, like I have to force it straight for the holes to align to screw it down.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Back I/O not completely alligned