Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Blue cold cathode lighting
New Posts  All Forums:Forum Nav:

Blue cold cathode lighting

post #1 of 4
Thread Starter 
Hey all. I got me a couple 12" cold cathode blue light i have installed in my case and the double sided tape im using is coming loose after it heats up, any thought as of how to secure it to my case in the upper part of the case?? I'm using 3M double sided carpet tape to hold it in place cuz i got no other way other than gluing it in place. someone got a idea???
post #2 of 4
Velcro? Your still going to be a slave to double sided tape unless you do glue it....but I would just try to find some really strong two sided tape. I'm surprised the 3mm carpet sticky tape isn't working.
post #3 of 4
I highly recommend servo tape from a local hobby store. Find it in the RC cars section. Stuff's pretty amazing.
post #4 of 4
Thread Starter 
K I use velcro this time and it seems to be holding. I set my fans to low and increased the temp in my room to see if it would give. Still holding strong. Thanks Whodat1972
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Other Hardware Mods
Overclock.net › Forums › Case Mods & Cases › Other Hardware Mods › Blue cold cathode lighting