Originally Posted by EK_tiborrr
Don't cheap on it now, bro!
Lol, don't know. Might still get it. I only have a few inches of clearance and I just went over to CaseLabs site. Shows the TH10 w/ casters will push it past my desk height.
Which also brings up the point of out of sight rig, no more purrtty to look at so not really going to bling it out. Might look for a Supremacy to match the Lightning blocks. You guys still making the nickel top csq? Elite a too pricey for me to even make the change. Might scope out ebay and the forums. Ocn has contributed in the elevation of ocd in myself
Originally Posted by axiumone
And now my friend, you've reach the biggest hurdle that I encountered. I've searched for high and low for something that would solve this issue.
This is the closest thing to a solution that I've found - ebay
I bought exactly what's in the auction, but I went by the picture and not by the description. What came are 2 rows of pins by 2 pins. So little blocks of 4 pins total. I had to shave the sides of the blocks in order to get them to fit side by side, because they were too thick. It didn't solve the problem though, as these pins are actually much thinner than what's used on the motherboard headers and whatever you would plug into these adapters would just slip out after a little while.
The only semi normal solution that I was able to come up with, short of using the motherboard power switch every time is leaving the connectors out all together and configuring the bios to power on with a keyboard stroke.
Edit - Also, something I forgot to mention. The three PE cards are flashed with a lightning UEFI GOP bios, for some ultra fast boot times. The BE is the stock bios that came from MSI. You may want to flash the BE card with a GOP bios for some faster boot times.
Originally Posted by kpoeticg
Search for "Right Angle Dupont" or "Right Angle 2.54mm Pitch"
Thanks guys. I think I'll look for some pin inserts (like the probes MSI gives you for the lightnings). I usually keep my rig in sleep most of the time so its no hassle getting it on but if does go out, I need to get down there and switch it back on. I can manage since it gives me quad lightnings (some small sacrifices will be in order I guess). Will look into those for though and thanks (+1s for both).
Originally Posted by PCModderMike
Damn, that right there...money shot.
Originally Posted by kpoeticg
Yeah that's a pretty epic pic lol. I can't even imagine gaming on that setup.
One concern was the depth of view. Too close and naturally your eyes will crop off the two end monitors. It was important for me to place my seating position properly otherwise I would be able to see the five screens. I pushed back the original desk at the corner about 19" at the diagonal. Worked out great imho.
Originally Posted by mironccr345
Looking good werm.
Got some good news. The damaged Dell did stay up and running for a bit as I was cleaning. I got a reply from the seller who offered a full refund or a partial refund. The screen looks to be running ok so I'll take my chances with the partial refund. Either way, if it dies on me for whatever reason, I see damaged ones sell for a some amount on ebay for parts. We'll have to wait and see how long it lasts.
One more trip to the doc and I get my meds back (
). Need to get the cpu up to speed and finish cleaning. Hopefully but this weekend, I'll test some games in Eyefinity. I know BF3 will be the first Edited by wermad - 11/6/13 at 8:49am