Overclock.net › Forums › Components › Memory › Can my custom system actually support my 1600Mhz RAM?
New Posts  All Forums:Forum Nav:

Can my custom system actually support my 1600Mhz RAM? - Page 2

post #11 of 15
Thread Starter 
Well I upped the voltage to 1.65v, and so far using Memtest86 (one stick at a time) i'm on 3 Passes with no errors. I will go to 6 passes for each stick to ensure that they can handle the voltage bump and that the system remains stable.
post #12 of 15
If those modules are rated for 1.65v (as you stated), then there is no reason to believe that they can't handle that voltage level. I can't think of a single memory IC currently being used that can't handle 1.65v...and many REQUIRE it to run stable.

I'm quite sure that you will find it cures your BSOD errors.
post #13 of 15
Thread Starter 
Quote:
[Jul 9 10:58] Torture Test completed 136 tests in 5 hours, 24 minutes - 0 errors, 0 warnings.
[Jul 9 10:58] Worker stopped.


Thanks for everyone's help. I feel very strongly that the problem has been resolved. When I increased the memory clock from 1333Mhz to 1600Mhz, I never thought about overvolting. I increased the voltage from the bios auto of 1.5v to the stock rating of 1.65v and ran a Prime95 Blend for 5 hours and 24 minutes with 0 errors and 0 warnings. Before the prime95 test, I also completed an individual Memtest86 for both sticks that resulted in 3 complete passes with no errors or misreadings. Again, thanks everyone!
post #14 of 15
I'd say you're good-to-go. thumb.gif
post #15 of 15
You're solid! smile.gif Enjoy!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › Can my custom system actually support my 1600Mhz RAM?