Overclock.net › Forums › Cooling › Water Cooling › H100 broken parts :( help
New Posts  All Forums:Forum Nav:

H100 broken parts :( help - Page 3

post #21 of 23
Thread Starter 
Quote:
Originally Posted by evilDSM View Post

1X H100 Backplate (you have this) a beefier backplate is preferred. Make sure you Insulate the h100 block with electric tape or vinyl.
4X H100 Backplate spacers (you have this)
4X 1.5" Bolts
4X Plastic Washers (these will go on the mobo so you can tighten the nuts that will go on the top without scratching, gouging or shorting the mobo)
4X Nuts that will fit on your 1.5" Bolts. 4 Will go on top of those plastic washers to keep the bolts steady on the motherboard.
8X Metal washers (4 will go on after the block is seated to keep the springs from sliding through the block mount holes and 4 on top of the springs.)
4X Springs (Half Inch long? I'm not sure but, get them as short as possible to make it easier to put the final nuts)
4X Nuts that will fit on your 1.5" Bolts. These will be the final nuts put on make sure the block is straight and tighten everything evenly)

All of this can be had under $10 at your local hardware store.

THANK YOU VERY MUCH!
Budget gaming PC
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 4700MQ  Intel® 8 Series Chipset 2GB GeForce™ GTX 765M 16 GB Kingston HyperX 1600Mhz 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 SSD 250 GB 500 GB 5400rpm HDD Ultra Slim DVDRW X16 Full custom copper cooling  
OSMonitorKeyboardPower
Windows 10 Pro 15.6 inch Widescreen LED 1080p Full size isolated keyboard with numeric pad 8 Cell Smart Lithium-ION Battery Pack - 76.96WH 
CaseMouseAudio
Optimus V Barebone Razer Copperhead 2 x Onkyo High Quality Speakers 
  hide details  
Reply
Budget gaming PC
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 4700MQ  Intel® 8 Series Chipset 2GB GeForce™ GTX 765M 16 GB Kingston HyperX 1600Mhz 
Hard DriveHard DriveOptical DriveCooling
Samsung 840 SSD 250 GB 500 GB 5400rpm HDD Ultra Slim DVDRW X16 Full custom copper cooling  
OSMonitorKeyboardPower
Windows 10 Pro 15.6 inch Widescreen LED 1080p Full size isolated keyboard with numeric pad 8 Cell Smart Lithium-ION Battery Pack - 76.96WH 
CaseMouseAudio
Optimus V Barebone Razer Copperhead 2 x Onkyo High Quality Speakers 
  hide details  
Reply
post #22 of 23
Quote:
Originally Posted by fedrosishere View Post

THANK YOU VERY MUCH!

No worries!

Let us know how it goes smile.gif
post #23 of 23
Quote:
Originally Posted by fedrosishere View Post

Hey all,
i boufgt a H100 from the internet and when i tried to screw the actual water cooler on to the CPU socket... it broke. Here is a pic.



Also i am an expert in photoshop as you can see!

Anyway, i dont think i can get one from well.... anyware... little help pls?
Old thread, i know. smile.gif
The former owner at ebay mounted it with a screwdriver.

Protip: Those are thumbscrews.
Use of screwdriver is for removal only, if needed. You do not need the force of a screwdriver to tighten these coolers.
Quote:
Originally Posted by evilDSM View Post

Those break rather easy you might as well do a custom mount if shipping is outrageous,

I did this mount and it yielded better temps.
Cheap and better fix IMO
No, they do not break easy. See protip above.


I read a review of this cooler, dont remember what page and the reviewer stated that the "screws was of poor quality and was bent".
biggrin.gif Ya, dont use a screwdriver to tighten thumbscrews.

BTW, Corsair has very good support. There is no problem getting spareparts, most of the time free of any charges aswell.
i5 gaming
(15 items)
 
  
CPUMotherboardGraphicsRAM
6600k @4.6 Asus Z170 Pro Gaming MSI 1060 Gaming X @2.1/4.8 Corsair DDR4 Vengeance White led 3000 @3.3 
CoolingOSMonitorMonitor
H100i with Noctua IndustrialPPC PWN Windows 10 Pro Epson TW-3200 AOC 144Hz 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid XFX Pro 750w Antec P280 Corsair Sabre RGB Optical 
Mouse PadAudioOther
fnatic HyperX cloud LAN Intel 219V 
  hide details  
Reply
i5 gaming
(15 items)
 
  
CPUMotherboardGraphicsRAM
6600k @4.6 Asus Z170 Pro Gaming MSI 1060 Gaming X @2.1/4.8 Corsair DDR4 Vengeance White led 3000 @3.3 
CoolingOSMonitorMonitor
H100i with Noctua IndustrialPPC PWN Windows 10 Pro Epson TW-3200 AOC 144Hz 
KeyboardPowerCaseMouse
CM Storm Quickfire Rapid XFX Pro 750w Antec P280 Corsair Sabre RGB Optical 
Mouse PadAudioOther
fnatic HyperX cloud LAN Intel 219V 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › H100 broken parts :( help