Overclock.net › Forums › Cooling › Water Cooling › Ax series in push/pull vs rx in push or pull
New Posts  All Forums:Forum Nav:

Ax series in push/pull vs rx in push or pull

post #1 of 2
Thread Starter 
Fan speeds around 1000-1350 what do u think will be better?

Setup is ax360 push pull
Ax480 push pull

Vs

Rx360 push
Rx480 push

Thoughts?
post #2 of 2
generally, the higher fin-per-inch (more fins - higher density) would require a
taller RPM fan speed. the looser the fin array the easier the air can pass-through
and use lower fan-speed according to desired temperatures needed.

i will always error to the RX-series, unless space dictates otherwise.
but push/pull on the AX/EX-series will make the build quieter because the
fan only has to work half as hard over the RX radiator. so two low speed fans
over one medium fan speed usually triumphs in low noise output.

airdeano
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Ax series in push/pull vs rx in push or pull