post #1 of 1
Thread Starter 
Hello, I'm new to this site. I have a system I built about two years ago. I've been adding parts to it ever since.

I currently have the following components:
Cooler Master Storm Sniper AMD Dragon Edition Tower
ASUS Crosshair IV Formula
AMD Phenom II X6 1090T
Kingston KHX1600C9D3K2/8GX
Corsair HX1050 PSU
Corsair H100i
2X Sapphire Radeon HD 6970 CFX (925/1425, 20%)

I have the following settings:
CPU PWM Frequency: 500KHz
CPU FSB: 260MHz
CPU: 4.03GHz (FSBx15.5, 1.5V, ~58C), LLC 100% = 1.501V - 1.601V
CPU/NB: 2600MHz (FSBx10, 1.3V, ~58C), LLC 100% = 1.316V - 1.356V
NB: (1.25V, ~55C), 1.277V - 1.290V
HT: 2080MHz (FSBx8, 1.25V), 1.277V - 1.283V
DRAM: 1733MHz (3:10, 1.65V, 10-10-10-30-40-2T), 1.667V - 1.700V
Spread Spectrums: Disabled
Power Saving Features: Disabled

I feel I should be able to get more out of my system, I'd like to tighten the timings on the DDR3, and I'd like to push my CPU close to ~4.5GHz. Has anyone else have any experience with my components that may be able to help me? This is my first enthusiast system, and the first time I've learned about overclocking. I've been overclocking it for the past few months now.

I have absolutely no experience overclocking the DRAM properly, I assume the settings I have (which makes my system stable) are high latency, I'd like to find a better latency. I'd really like some help with the ram. Thanks.

CPU-Z validation:
http://valid.canardpc.com/2863302
Prime95 stable for 2H on blend currently, still testing.
Edited by 8MlTsCl1 - 7/13/13 at 9:41pm