Originally Posted by feznz
If you don't like soldering you could do what I did got the toothpicks out and wedged the wires in
I soldered everything in but thats a great tip for others! Im a little embarrased since my solder looks like a "cold solder", The solder I had on hand is junk but the wife went shopping and the light bulb went off that I should have plenty of time to do the mod so used what I had on hand lol. Also used a 13k pot instead. Im gonna try to find a clever way to mount it since I have a bracket to mount it on a flat surface. Its a cheap kit we use on forklifts for throttle control.
Im curious how stable the voltage is that way? If there is too much resistance I could see some flutter during benching. BUT Im not sure how much amperage is really going through that anyways.
I think someone in here had their voltage moving around a bit, cant remember who but mine during a valley pass was very stable at 1.312v, Once temps go down I will feel better about 1.35-1.40v. My psu is an ax850.