Overclock.net › Forums › Case Mods & Cases › Computer Cases › Carbide 500R/HX 850 psu question
New Posts  All Forums:Forum Nav:

Carbide 500R/HX 850 psu question

post #1 of 3
Thread Starter 
I just got a Corsair HX 850 watt psu and have a question about it and the Carbide 500R's molex fan controller connector. The HX 850 has 2 molex to 4pin fan connector's. Can Iuse these to connector's for the case's fan controller and the Hydro H-100's molex connector ? It would make my cable management better, as those are my only molex device's. My mobo has 6 fan header's. Only 4 would be used with the molex to 4pin connector's.
post #2 of 3
Quote:
Originally Posted by brkkab View Post

I just got a Corsair HX 850 watt psu and have a question about it and the Carbide 500R's molex fan controller connector. The HX 850 has 2 molex to 4pin fan connector's. Can Iuse these to connector's for the case's fan controller and the Hydro H-100's molex connector ? It would make my cable management better, as those are my only molex device's. My mobo has 6 fan header's. Only 4 would be used with the molex to 4pin connector's.

Yep, it would work, just make sure you turn up the speed on those fan controllers.
post #3 of 3
Thread Starter 
Thanks. O n the case's fan controller is the top or bottom position high ? I'm going to set the H100 to medium as I'm not overclocking until after my upgrades are all done. The H80 worked fine in my old case, with my old mobo and cpu overclocked on medium. I still want to have a Barracuda 3.0tb., GTX 660ti and Samsung 840 Pro 256gb. first
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › Carbide 500R/HX 850 psu question