Overclock.net › Forums › Components › Memory › Corsair Dominator Platinum RMA or to not RMA...
New Posts  All Forums:Forum Nav:

Corsair Dominator Platinum RMA or to not RMA...

post #1 of 4
Thread Starter 
Hello everyone, I have been having alot of problems lately with my Sig Rig. Including lots of program crashed, a couple of BSODs and a whole lot of hang time. I have been seeking help in this thread: http://goo.gl/9QJey

And it seems that all of my issues are pointing to my 4x4gb sticks of Dominator platinum memory. I have tested it 2 sticks at a time using Memtest86, all 4 having at least one error while testing for at least 5 hours. Memtest86 Results (Click to show)

So, what i want to know is, should I just RMA? Is there something else I should try to see if it will preform better? Thanks in advance, OCN Rules thumb.gif

Just to make it easier, I'll put the specs here smile.gif

CPU Intel Core i7-3930K 3.2GHz 6-Core
RAM Corsair Dominator Platinum 16GB (4 x 4GB) DDR3-1866
OS Windows 7 Ultimate
Motherboard Asus Rampage IV Extreme EATX LGA2011
Hard Drive WD Caviar Black 2TB
Power Corsair HX1050
Graphics GeForce GTX Titan
Cooling Corsair H100i
Case NZXT phantom 820
post #2 of 4
DDR3-1866 is low enough for IMC not be inducing these errors, so it's most likely the memory.
I would try to RMA the sticks - in worst case they will just send you another working kit.
post #3 of 4
Another thing to try is put Rampage Tweak Mode to Auto if it isn't already.

That setting is in the Dram Timings.
post #4 of 4
Thread Starter 
Quote:
Originally Posted by MrTOOSHORT View Post

Another thing to try is put Rampage Tweak Mode to Auto if it isn't already.

That setting is in the Dram Timings.

It was already set to auto frown.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › Corsair Dominator Platinum RMA or to not RMA...