Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 1086

post #10851 of 19539
Quote:
Originally Posted by JackNaylorPE View Post

try this....

1. Save your current BIOS profile in the Tools section s you can restore it.
2. Restore BIOS to defaults
3. Set XMP profile, Sync all cores and 42/42/42/42 as multiplier
4. Set min / max cache ratio to 42
5. Set voltage to 1.18 .... I have tried lower but it still runs at 1.18 ... if 1.18 not stable pick something that is
6. Save and exit
7. Open HW Monitor, put on right side of screen
8. Open RoG Bench, put on left side of screen,
9. Run Open CL test ....
10. List ya voltage as set in the BIOS and then what HWM lists in max column for VID / Vcoreat end of test (see pic below)



BTW, if ya wondering about fans and temps .....Chassis 1 is the top rad fans and Chassis 2 is the bottom rad fans .... CPU Fan is actually pump speed.

Why are you asking me to do this??
post #10852 of 19539
Quote:
Originally Posted by JackNaylorPE View Post

1.28 ?

I see 1.55 .... I freaked when I hit an instantaneous 1.48 under RoG Real Bench (w/ AVX)

I think you're confusing his posts with the other guy (overclocktr?) - if you recall, he's the one who got excited at my 4.7 OC lmaoo.
Quote:
Originally Posted by davwman View Post

ok seems that Im a little confused with haswell and stress testing(too many options) back in the day of my Athlon xp chips, early core 2 duos, q6600 etc. prime was the go to. When ever I run x264 it bsods, aida 64 runs no problem and the actual intel extreme overclocking utility stress testing program runs also. is x264 really stressing the chip that much that its really finding a problem that easily? or is there something else going on?

You can see Ftw420's answer too - but I mainly used x264 for testing (supplemented with XTU bench as a sanity check, and then P95 1792/1792).
I actually was already doing both 1344/1344 and 1792/1792 before I even found this thread - this was a carryover from my testing with my Lynnfield/e8400.
P95 alone is often not enough either for 3D stable, and I found that out as long ago as my 2500XP-M (11 years ago). I was ridiculed at the LAN because my 2.6Ghz OC wasn't 3D stable (despite 12hr+ P95 blend). *You can say that was the impetus for staying with pure 24/7 OCs only; no more SuperPI-stable nonsense (which is still popular at somewhere like XS).

But to your earlier question - is it worth it? I actually don't even use my 4.7Ghz OC as my 24/7.
I back down to a more conservative 1.215 VID (1.8VRIN) for 4.6Ghz because, well, it runs at stock VRIN. My 4.7Ghz required 1.95 to pass x264/XTU, and 2.01 to pass 1792/1792 P95. So is 100Mhz worth increased vcore and VRIN? Well to me, nope not really.
I can run my fans at minimal speeds - and I value that above everything else.

*There's also many 46x results in the database at only 1.24VID, so I know my chip is hardly anything special either. Slightly better than average - I guess.
Edited by mav451 - 3/7/14 at 5:12pm
Main
(20 items)
 
  
CPUMotherboardGraphicsRAM
i5 4670K @ 4.7Ghz [1.284v] Z87X-UD4H [F7] MSI GTX 1070 Gaming X 2x4GB Samsung MV-3V4G3; 10-10-10-28 @ 2133Mhz [... 
Hard DriveHard DriveHard DriveHard Drive
1x Samsung 850 Pro 256GB 1x Crucial M500 960GB 1x WD4003FZEX 1x WD30EFRX 
CoolingCoolingOSMonitor
NH-D14 3x A15s @ 600RPM 2x Phanteks F140SP BBK (front), SFF21E (bottom) Win 10 Pro x64 Catleap 2B @ 119hz +1 
MonitorPowerCaseMouse
U3014 eVGA 750G2 Fractal R5 - Blackout Edition MS WMO 1.1a 
Mouse PadAudio
fUnc 1030 Creative Sound Blaster Z 
  hide details  
Reply
Main
(20 items)
 
  
CPUMotherboardGraphicsRAM
i5 4670K @ 4.7Ghz [1.284v] Z87X-UD4H [F7] MSI GTX 1070 Gaming X 2x4GB Samsung MV-3V4G3; 10-10-10-28 @ 2133Mhz [... 
Hard DriveHard DriveHard DriveHard Drive
1x Samsung 850 Pro 256GB 1x Crucial M500 960GB 1x WD4003FZEX 1x WD30EFRX 
CoolingCoolingOSMonitor
NH-D14 3x A15s @ 600RPM 2x Phanteks F140SP BBK (front), SFF21E (bottom) Win 10 Pro x64 Catleap 2B @ 119hz +1 
MonitorPowerCaseMouse
U3014 eVGA 750G2 Fractal R5 - Blackout Edition MS WMO 1.1a 
Mouse PadAudio
fUnc 1030 Creative Sound Blaster Z 
  hide details  
Reply
post #10853 of 19539
Quote:
Originally Posted by mav451 View Post

I think you're confusing his posts with the other guy (overclocktr?) - if you recall, he's the one who got excited at my 4.7 OC lmaoo.
You can see Ftw420's answer too - but I mainly used x264 for testing (supplemented with XTU bench as a sanity check, and then P95 1792/1792).
I actually was already doing both 1344/1344 and 1792/1792 before I even found this thread - this was a carryover from my testing with my Lynnfield/e8400.
P95 alone is often not enough either for 3D stable, and I found that out as long ago as my 2500XP-M (11 years ago). I was ridiculed at the LAN because my 2.6Ghz OC wasn't 3D stable (despite 12hr+ P95 blend). *You can say that was the impetus for staying with pure 24/7 OCs only; no more SuperPI-stable nonsense (which is still popular at somewhere like XS).

But to your earlier question - is it worth it? I actually don't even use my 4.7Ghz OC as my 24/7.
I back down to a more conservative 1.215 VID (1.8VRIN) for 4.6Ghz because, well, it runs at stock VRIN. My 4.7Ghz required 1.95 to pass x264/XTU, and 2.01 to pass 1792/1792 P95. So is 100Mhz worth increased vcore and VRIN? Well to me, nope not really.
I can run my fans at minimal speeds - and I value that above everything else.

*There's also many 46x results in the database at only 1.24VID, so I know my chip is hardly anything special either. Slightly better than average - I guess.

It's hundreds of mhz above average

You really needed over 2vrin with less than 1.3vcore?
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
post #10854 of 19539
Currently running 1.85 vrin with 1.2v Vcore at 4.6ghz I gave up on 4.7 didn't see the need the 100mhz at 1.29v
post #10855 of 19539
Quote:
Originally Posted by davwman View Post

Currently running 1.85 vrin with 1.2v Vcore at 4.6ghz I gave up on 4.7 didn't see the need the 100mhz at 1.29v

You shouldn't have to add that much vcore
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
post #10856 of 19539
Quote:
Originally Posted by Cyro999 View Post

Quote:
Originally Posted by davwman View Post

Currently running 1.85 vrin with 1.2v Vcore at 4.6ghz I gave up on 4.7 didn't see the need the 100mhz at 1.29v

You shouldn't have to add that much vcore

So more vrin then?
post #10857 of 19539
Quote:
Originally Posted by davwman View Post

So more vrin then?
yeah if you were @ 4.7 with 1.29v and 1.85vccin you should put it to 2.0v vccin
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #10858 of 19539
It seems I might have a good chip, maybe a golden sample(maybe). I'm on to something with this chip and actually got 4.9ghz to boot windows with 1.32v vcore the x264 bench that was posted back a bunch of posts is weird. Sometimes it will bsod early at say 5% and then it will bsod at say 80%. There is an inconsistency in x264 bench that other test aren't picking up. I've been out of the overclocking game for a long time. Dare I say since I had a wolfdale 8400/8600 on a dfi LP board. So I guess I'm looking for a little advice in my drunken stupor post.
post #10859 of 19539
Quote:
Originally Posted by davwman View Post

It seems I might have a good chip, maybe a golden sample(maybe). I'm on to something with this chip and actually got 4.9ghz to boot windows with 1.32v vcore the x264 bench that was posted back a bunch of posts is weird. Sometimes it will bsod early at say 5% and then it will bsod at say 80%. There is an inconsistency in x264 bench that other test aren't picking up. I've been out of the overclocking game for a long time. Dare I say since I had a wolfdale 8400/8600 on a dfi LP board. So I guess I'm looking for a little advice in my drunken stupor post.

wouldent say golden but seems bettrer than most, the one i have that just died was similar to yours was up to 4.7Ghz with 1.3v vid and 2.0v vccin
... you shouldent need that high if you're stable @ 4.6ghz with 1.2v. id try 1.25v -1.275v with 2.0vccin for 4.7ghz
Edited by lilchronic - 3/7/14 at 7:24pm
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
Daily Rig
(21 items)
 
Bench Setup
(19 items)
 
 
CPUMotherboardGraphicsRAM
5820k 4.7Ghz @ 1.28vcore / 1.88vccin Gigabyte x99 SOC Champion EVGA GTX 1080Ti G.SKILL Trident Z 32GB 3200Mhz CL14 
Hard DriveHard DriveHard DriveHard Drive
2x Intel 520 120Gb SSD in RAID 0  Intel 180Gb 530 SSD OS Drive 2Tb WD HDD  2x Intel 730 SSD 480GB in RAID 0 
CoolingCoolingCoolingCooling
2x HWLabs GTX360 Black Ice in Push Pull EK blocks for CPU / GPU's 6x corsair sp120 2350RPM 6x Ek Vardar 120 F4's 2200rpm  
OSMonitorKeyboardPower
windows 10 XB270HU 2560x1440 - 144Hz - G-sync Razor blackwidow cooler master V1000 
CaseMouseMouse PadAudio
Corsair 780T EVGA TORQ x10 evga mouse pad 2.1 audio / Hyper X cloud II / Sennheiser Gam... 
Other
EK pump / res 
CPUMotherboardGraphicsGraphics
6600k Z170M OC Formula GTX780Ti AMD HD6450 
RAMHard DriveHard DriveHard Drive
Trident Z 3600Mhz cl16 2x8GB 120Gb intel 520 120Gb intel 520 64Gb adata ssd  
Hard DriveOptical DriveCoolingCooling
750Gb WD Black Sony  F1 Gemini CPU Pot Tek - 9 Fat 
CoolingOSMonitorPower
custom loop two 240rad's xp,W7,W8,W10 x-star 2560x1440  Rosewill Quark-650 Platinum / Antec HCP-850 Pla... 
CaseMouseMouse Pad
Dimastech Mini V1.0 black razor abyssus Razor 
  hide details  
Reply
post #10860 of 19539
I have the median CPU. This was a statistically probable outcome.

Username: coelacanth
CPU Model: 4770K
Core Multiplier: 45
CPU VID: 1.280v (Manual)
Vcore: 1.312v (max under load)
Uncore Multiplier: 42
Uncore Voltage: 1.150v (Manual) (1.208v max under load)
Cooling Solution: Phanteks PH-TC14PE with 2 120mm Cougar Vortex PWM push push
Stability Test: x264 many 2 loop passes of loop 2, BF4, FC3, benching Valley and Heaven, several weeks of uptime
Batch Number: 3319C235 (Costa Rica 2013 week 19)
Ram Speed: 2400MHz 10-12-12-31 2T
Ram Voltage: 1.65v (1.703v max under load)
Input Voltage: 1.780v (1.840v max under load)
LLC Setting: AUTO
Motherboard: Asus Maximus VI Hero UEFI BIOS 1301
My System
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770K @ 4.5GHz ASUS Maximus VI Hero Z87 Gigabyte GTX 980 Ti G1 Gaming 16GB (2 x 8GB) G.Skill Trident X DDR3-2400 
Hard DriveHard DriveHard DriveHard Drive
750GB Samsung 840EVO 256GB Crucial M4 150GB Velociraptor 1TB Samsung F1 
Optical DriveCoolingOSMonitor
Asus DRW-24B1ST Phanteks PH-TC14PE Win 10 64-bit 27" Qnix QX2710 96Hz 
KeyboardPowerCaseMouse
Cooler Master QuickFire Ultimate Cooler Master V1000 1000W 80+ Gold Fractal Design Arc Midi R2 Logitech G500s 
Mouse PadAudioOtherOther
Func Surface 1030 Asus Xonar Essence STX M-Audia AV 40 Polk PSW10 Sub 
  hide details  
Reply
My System
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770K @ 4.5GHz ASUS Maximus VI Hero Z87 Gigabyte GTX 980 Ti G1 Gaming 16GB (2 x 8GB) G.Skill Trident X DDR3-2400 
Hard DriveHard DriveHard DriveHard Drive
750GB Samsung 840EVO 256GB Crucial M4 150GB Velociraptor 1TB Samsung F1 
Optical DriveCoolingOSMonitor
Asus DRW-24B1ST Phanteks PH-TC14PE Win 10 64-bit 27" Qnix QX2710 96Hz 
KeyboardPowerCaseMouse
Cooler Master QuickFire Ultimate Cooler Master V1000 1000W 80+ Gold Fractal Design Arc Midi R2 Logitech G500s 
Mouse PadAudioOtherOther
Func Surface 1030 Asus Xonar Essence STX M-Audia AV 40 Polk PSW10 Sub 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]