Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 1181

post #11801 of 19599
Quote:
Originally Posted by Cyro999 View Post

Ah i didn't see that one shot, i checked a few pics though and it looked ok, like the prime showing 57-54-54-49, that's like exactly what i see

nice drops

Thanks! Yeah it is crazy how much a proper mount/seat can matter. The temp drop is absolutely phenomenal. I saw a good drop when I moved from an h100i to a custom loop, but his is something else.
Currently running the p95 small fft test that I had temps at 57-54-54-49 after 1st attempt and currently I am at 43-47-47-42 during the same test 10 minutes in.
post #11802 of 19599
Thread Starter 

There are now 161 entries. 

AVERAGE OC 45.50 MEDIAN OC 45.00
AVERAGE VID 1.29 MEDIAN VID 1.28

Chart now shows last updated date on upper left hand corner.

 

Quote:

Originally Posted by acanom View Post

System is stable at 4.6 with a cache clock of 4.4 on 1.3 VID/1.32 Vcore.

There is definitely more in it. But I´m going to delid next week and save the bigger OCs for after. Cause my chip is running to 90°C on a custom waterloop with 1.32 already. So I´ll have to remount either way and so I´m going for the delid in the process. Already ordered a bunch of 3€ Core Duos to pratice on thumb.gif

Created with GIMP
Created with GIMP

 

 

Quote:
Originally Posted by lilchronic View Post

Username: lilchronic
CPU Model: 4770k
Core Multiplier: 46
CPU VID: 1.4v
Vcore: 1.424v
Uncore Multiplier: 43
Uncore Voltage: 1.3v
Cooling Solution: water cooled
Stability Test:IBT
Batch Number: L345B842
Ram Speed: 2666Mhz 11-13-12-28-1T
Ram Voltage: 1.65v
Input Voltage: 2.1v
LLC Setting: LLC1
Motherboard: z87M oc formula


turns out i need aornd 1.475v for 4.7Ghz which is a little to much for my liking and IBT would probably hit 90c+ redface.gif

 

 

Quote:
Originally Posted by acanom View Post

Ok listing my settings here, but the OC will change in a few days after the delidding

Username: acanom
CPU Model: i7 4770k
Core Multiplier: 46
CPU VID: 1,28
Vcore: 1,302
Uncore Multiplier: 43
Uncore Voltage: 1,18
Cooling Solution: custom loop
Stability Test: OCCT:CPU 4h,Prime 28.2 1344k 1h, Prime Blend 12h.IBT 25 Runs very high and some more
Batch Number: Batch: 3334CXXX
Ram Speed: 1600, 9-9-9-24
Ram Voltage: 1,44
Input Voltage: 1,9
LLC Setting: auto
Motherboard: Msi z87-gd65

 

 

Quote:
Originally Posted by Doolie View Post

Ended up getting my i5 4670K stable @ 4.5GHZ @ 1.28V but i'm just not sure if the gain in temps *81C x264) and volts are worth it. Before this, I had it running @ 1.2V @ 4.2GHZ with uncore @ 42 / AUTO V aswell and it was rock solid @ 68C with x264 . I know 300mhz is 300mhz.

2014-03-16

Your picture is missing bro.

 

Quote:
Originally Posted by mouacyk View Post

Username: mouacyk
CPU Model: i7-4770K
Core Multiplier: 45x
CPU VID: 1.26v
Vcore: 1.272v
Uncore Multiplier: 44x
Uncore Voltage: 1.185v
Cooling Solution: H220
Stability Test: LinX 50 passes, Intel Xtreme Tuning 5min Stress, Rog RealBench 2.1, SC2:HoTS 2 hours, HCI MemTest - 800% coverage, BF4 3 hours
Batch Number: Malay L307B236
Ram Speed: 1866MHz 9-9-9-27-2T
Ram Voltage: 1.5v
Input Voltage: 1.8v
LLC Setting: Extreme
Motherboard: Gigabyte Z87X-UD4H

 

 

Quote:
Originally Posted by FractinJex View Post

WILL POST HIGHER CLOCKS ONCE CLU HAS ARRIVED ON FRIDAY biggrin.gif

Username: ClexRex

CPU Model: i7 4770k approx. 10th 4770k tongue.gif

Core Multiplier: 45x
CPU VID: 1.17v

Vcore: 1.17-1.175v Adaptive mode was able to boot 4.5ghz around 1.12v but froze shortly after load.

Uncore Multiplier: 40x

Uncore Voltage: 1.16v Adaptive mode

Cooling Solution: Water loop - 1x 360mm slim / 1x 240mm thick rad ek ltx cpu block and ek res/pump combo 2.2 primochill tubing. ek blood coolant ;]

Stability Test: approx. 6 hours of gaming and one 6h 22min intels tuning utility stress test...idle 24-30 max load temp. 63-66c (non delid) side panel off

Batch Number: Batch# 3332B costa rica

Ram Speed: 8gb 2400mhz gskill 10-12-12-31 1t 1.65v System agent offset + 0.180

Ram Voltage: 1.65v board auto applys a + offset so around 1.66v

Input Voltage: 1.86v msi boards auto apply a + offset of 0.0015 - note could possibly run lower possibly not due to ram speed and sli support.

LLC Setting: 100% cpu current enhanced

Motherboard: MSi mpower max ac latest bios : Note with my mpower max board I can run lower vcore and uncore voltages as well as vrin voltage vs any Asus board ve tried including formula/exterem...this based off of personal finding and NOT 100% (fact)

thumb.gif

http://i.imgur.com/IS3E9gN.jpg

You never updated your settings, FractinJex.

 

Quote:
Originally Posted by MaKe OuT View Post

Further updating:
Going for the 44 multi
Tried the idea of increasing VRin. Dropped Vcore down to 1.36, VRin to 2.00. SA offset 0.1, digital I/O offset 0.1, analog I/O offset 0.05. Disabled Cstates just for the heck of it. BSOD 101.

Then, bumped VRin to 2.1. BSOD 101 after 7 loops x264.
Then, bumped Vcore to 1.38. BSOD while sleeping x264.
Highest temps are 77C.

I suppose next is to try upping Vcore to 1.40 and giving it another go. Also, can up VRin up to 2.15 and can up my SA and I/O offsets. Probably don't want to set Vcore above 1.43 (as it will hit 1.45 under load). I am running out of room! Looks like I'm barely going to hit 44 on this chip and it is looking like 43 may be the better 24/7 setting. Still going to try though.

Wonder how much I can sell it for and upgrade to HW-refresh?biggrin.gif

 

 

Quote:
Originally Posted by Alxx View Post

I5 4670K 4,5 Ghz 1,156 VID

 

 

Quote:
Originally Posted by Horsemama1956 View Post

Username: horsemama1956
CPU Model: i5 4670K
Core Multiplier: 45
CPU VID: 1.248
Vcore: 1.246
Uncore Multiplier: 42
Uncore Voltage: 1.2
Cooling Solution: Noctua NH-U14S
Stability Test: x264 Stability test with 30 passes(overnight)
Batch Number: L345B810
Ram Speed: 1600-9-9-9-24-1T
Ram Voltage: 1.5
Input Voltage:1.9
LLC Setting: Extreme
Motherboard: Gigabyte Z87-D3HP


Forgot to take a picture this morning before closing the text, but whatever. Managed to bring vcore down .02. Not sure if i'll bother going higher right now, though the hottest core only hit 67.

 

 

Quote:
Originally Posted by VeliManne View Post

I guess I'm finally done with finding stable settings. Realbench really gave me a hard time. Overnight Prime1344 & x264 were stable with 1.270 vid/1.870 vccin but Realbench kept freezing/bsod. On Friday evening I left it running with 1.280 vid / 1.9 vccin for 8 hours. During the night it froze up. Good thing was that it froze rather than bsod because I got a good indication what was wrong. Hfinfo64 reported 12-20 G of max freqs. Some sort of conflict there. So last evening I dropped to 1.270 vid / 1.870 vccin and started the 8 hour test without hfinfo64 and went to watch a movie. Bsod but fortunately before the movie finished. 1.275 vid / 1.880 vccin and once again then went to bed. This morning the 8 hours was successful. I'v noticed that the impact on voltages are pretty much 1=1 with prime1344 & Realbench. So I loaded hfinfo64 and ran prime1344 for 15 min to get that under load vcore reading.

X264 50 loops. 1.270 vid 1.870 vccin


Prime95 27.9 1344-1344 5600 MB of RAM 8 hours. 1.270 vid 1.870 vccin


ROG Realbench stress test 4 GB of ram 8 hours. 1.275 vid 1.880 vccin


Before these I tried Prime1344 with 1.265 vid but it did'nt last for an hour before bsod. I guess the 1 hour run with chart values was a lucky strike.

Username: VeliManne
CPU Model: i5-4670k
Core Multiplier: 45
CPU VID: 1.275
Vcore: 1.296
Uncore Multiplier: 43
Uncore Voltage: 1.230
Cooling Solution: NH-D14
Stability Test: ROG Realbench stress test 4 GB RAM 8 hours. (X264 50 loops, Prime95 27.9 1344-1344 5600 MB of RAM 8 hours)
Batch Number: Costa Rica 3316b767
Ram Speed: 1600 MHz, 9 9 9 27 XMP
Ram Voltage: 1.65
Input Voltage: 1.888
LLC Setting: Level 8
Motherboard: Asus Z87-A

Well I can't feel good or bad about my chip. I can only feel average. biggrin.gif

 

 

Quote:
Originally Posted by MaKe OuT View Post

OK. settled on an OC finally. Been playing with ram all weekend and ended up only tightening one timing. It seemed that no matter how I overclocked it, the computer would reboot at sometime during the x264 stress.

Username: MaKe OuT
Model: i7-4770K
Core multi: 43
VID: 1.30
Vcore: 1.31
Uncore multi: 40
Vuncore: 1.31
Cooling: H110
Stability test: 20 loops x264
Batch: Malay
Ram: 1866 9-9-9-28 1T
Dram voltage: 1.60
Input voltage: 1.94
LLC: Level 8
Mobo: Hero BIOS v. 1301

 

 

Quote:
Originally Posted by jsx821 View Post

• I5-4670K/ASUS Z87-A/H100I/DELIDDED/IHS LAPPED/LIQUID PRO
CPU BATCH #:3339B838/COSTA RICA/ SR14A
EIST DISABLED
C-STATE DISABLED
MULTI CORE ENHANCEMENT DISABLED
AI OVERCLOCK TUNER: MANUAL PROFILE (NON XMP)
RAM FREQUENCY: MANUAL @ 1066MHZ
CORE RATIO: 46X ALL CORES
CORE VOLTAGE: MANUAL @ 1.420v (VID: 1.419v)
CACHE RATIO: 34X MIN & MAX
CACHE VOLTAGE: MANUAL @ 1.200v
INPUT VOLTAGE: MANUAL @ 2.000v
WINDOWS POWER OPTION: BALANCED MODE
AMBIENT TEMPERATURE: CALIFORNIA ~15C-20C
FANS: ALL 5 SET TO MAX
STABILITY TESTING: ALL DONE SIMALTANEOUSLY FOR ABOUT 8 HOURS- PRIME95/ HD STREAMING ON YOUTUBE/SOME WEB BROWSING/ 1080P MOVIE ON VLC
MIN IDLE TEMP: 21C
MAX IDLE TEMP: 30C
MIN LOAD TEMP: 65C
MAX LOAD TEMP: 71C

I know.. my chip is most likely below the 20th percentile.
I am waiting to mess with LLC (Auto), RAM frequency (1066mhz), and Cache ratio (34x) till the end when I get all my voltages in order.
Furthermore, I’m only tweaking Cache Voltage and Input Voltage at the moment. And the Core Voltage is WAY high for 46x but my temps look okay-- I think. My screen kept freezing up on me at 1.400v after about an hour on prime95. So I bumped it up to 1.420v. I may have to bump it up a little more for maximum stability.
Overall, it seems pretty stable as of right now- no random BSOD/screen freeze/auto reboot at these settings. This will be my 24/7 OC on manual mode (no adaptive/offset). I don’t do video editing or play any ‘hardcore’ games, just some CS: GO and SC 2 every now and then. This is also my first build/overclock and will be using this computer for everyday stuff. I know it’s a bit over kill, but I caught the OC bug *grin*. How does my voltage look with my temps? Any suggestions/tips for my settings? Thanks!

Is this a charting entry?

 

Quote:
Originally Posted by mistercoffee1 View Post

And,
Can I get charted, finally?

Username: mistercoffee1
CPU Model: 4670K
Core Multiplier: 44X
CPU VID: 1.264
Vcore: 1.265 within Bios
Uncore Multiplier: 38X
Uncore Voltage: Auto
Cooling Solution: Noctua NH-U14S
Stability Test: x264, 20 Passes
Batch Number: Costa Rica 3319C231
Ram Speed: 1600 9 9 9 24
Ram Voltage: 1.5
Input Voltage: Auto, at 1.744
LLC Setting: Note, 25% in the VDroop in Digitall power options.
Motherboard: MSI Z87-G45

 

 

Quote:
Originally Posted by GeneO View Post

Well haven't had the time to push any further. Here are my stats for 4.3 GHz 4770K:

Username: geneo
CPU Model: 4770K
Core Multiplier: 43X
CPU VID: 1.212 adaptive
Vcore: 1.229 (save across cores running x264 - latest version from angelotti)
Uncore Multiplier: 40X
Uncore Voltage: 1.196 ave. adaptive (running x264)
Cooling Solution: Noctua NH-D14 with NF-A15 and NF-F12 PWM fans with 5 Noctua case fans
Stability Test: x264 20 Passes, Prime 95 v28.5 1344k,1344k 2 hours
Batch Number: L323C544 Malaysia
Ram Speed: 1866 9-10-9-28
Ram Voltage: 1.5
Input Voltage: Manual, 1.760 V
LLC Setting: Level 3
VCCSA: 0.944 (+.07 offset)
Motherboard: ASUS Maximus VI Hero

 

 

Quote:
Originally Posted by treome View Post


Whoops..

Username: treome
CPU Model: 4770k
Core Multiplier: x47
CPU VID: 1.410v
Vcore: 1.428v
Uncore Multiplier: x34
Uncore Voltage: Auto
Cooling Solution: Custom Water
Stability Test: IBT Very High 10 Loop
Batch Number: Malay L312B528
Ram Speed: 1600 @ 11-11-11-28
Ram Voltage: 1.5v (stock)
Input Voltage: 2.00v
LLC Setting: Extreme
Motherboard: Z87-UD3H

 

 

Quote:
Originally Posted by treome View Post

Username: treome
CPU Model: 4770k
Core Multiplier: x47
CPU VID: 1.405v 1.410v
Vcore: 1.428v
Uncore Multiplier: x34
Uncore Voltage: Auto
Cooling Solution: Custom Water
Stability Test: IBT Very High 10 Loop
Batch Number: Malay L312B528
Ram Speed: 1600 @ 11-11-11-28
Ram Voltage: 1.5v (stock)
Input Voltage: 1.20v 2.00v
LLC Setting: Extreme
Motherboard: Z87-UD3H

 

 

Quote:
Originally Posted by Marc79 View Post

Might as well post my overclcok, seems like an average chip. Haven't pushed further as this thing gets pretty hot.

Username: Marc79
CPU Model: 4770k
Core Multiplier: x45
CPU VID: 1.270 vid
Vcore: 1.280 vcore
Uncore Multiplier: x39
Uncore Voltage: auto
Cooling Solution: H110
Stability Test: Battlefield 10+, GTA IV 10+, AIDA 6 hours, RealBench2.1
Batch Number: MALAY L310B493
Ram Speed: 1600Mhz 9-9-9-24
Ram Voltage: 1.5v
Input Voltage: 1.8v
LLC Setting: auto
Motherboard: Asus Hero

 

 

Quote:
Originally Posted by schlonzo View Post

Please add my results to your chart smile.gif

Sadly, its just 4,4Ghz. :/
I don't want to use more voltage than 1.3 and I'm really on the limit here with my CPU and UNCORE. Have been stable @ 4,6 with an older Prime95, but with the new Version and small FFT, i had to use x44.

Username: schlonzo
CPU Model: 4770K
Core Multiplier: 44
CPU VID: 1,7
Vcore: 1,3
Uncore Multiplier: 39
Uncore Voltage: 1,0
Cooling Solution: Noctua DH-14 / delidded
Stability Test: Prime95 27.9: 13h Blend (max. 77°C) & 2h small FFT (max. 95°C)
Batch Number: Costa Rica
Ram Speed: 2400 12:13:13:36 || G.Skill Trident X 2x8GB
Ram Voltage: 1,65
Input Voltage: 1,7
LLC Setting: AUTO
Motherboard: ASRock Z87M Extreme 4

 

 

Quote:
Originally Posted by SgtRotty View Post

Username: SgtRotty
CPU Model: 4770k
Core Multiplier: 43
CPU VID: 1.220
Vcore: 1.240
Uncore Multiplier: 43
Uncore Voltage: 1.220
Cooling Solution: h100 push/pull
Stability Test: bf4,bf3
Batch Number: L312B534 malaysia
Ram Speed: 2400 gskillz xtrident 4x4gb xmp1
Ram Voltage: 1.650-1.665
Input Voltage: 1.850
LLC Setting: %100
Motherboard: Z87-G45 [bios1.7]
System Agent:+250
AIO:+150
DIO:+150
Nondelidded

this is my latest and greatest updated. mine scales as follows:

1.220-43x
1.270-44x
1.320-45x
1.370-46x
1.420-47x

i saw no difference between 47x and 43x for playing bf4. except temps...

 

 

Quote:
Originally Posted by mbakalski View Post

Greetings, All!

Here is my Haswell experience thus far:

CPU Model: 4670k - sold/replaced with 4770k
Core Multiplier: 44
CPU VID: 1.3-ish
Motherboard: Z87-G65 [bios1.8]

CPU Model: 4770k - replaced with a new 4770k, after failed delid
Batch - L318 Malay
Core Multiplier: 44
Ring Multiplier:40
CPU Vcore: 1.34
Ring Voltage 1.20
VRIN: 1.95
Motherboard: Z87-G65 [bios1.9]

The latest 4770k seems to be much better than my 2 previous chips, although it is still nothing crazy.
So far I have tested the settings below and it seems stable (p95, Small FFTs 1 hour). I need to play around with it some more and fine tune it.

I am also using an older version of p95 so I need to update and retest.

Core Multiplier: 39
Vcore: Auto/ (HWINFO 1.127)
Uncore Multiplier: Auto
Uncore Voltage: Auto
Cooling Solution: Custom Loop
Stability Test: p95 Small FFTs 1 hour
Batch Number: 3333C Costa Rica - above average results on HWbot. I was lucky my local Microcenter let me pick through their stock
Ram Speed: 1866 Dominator GT 2x4GB
Ram Voltage: 1.504V
Input Voltage: Stock (HWinfo 1.776)
LLC Setting: Auto
Motherboard: Z87-G45 [bios1.9]
System Agent: Auto
AIO: Auto
DIO: Auto
Nondelidded

Core Multiplier: 44
Vcore: 1.185
Uncore Multiplier: 35
Uncore Voltage: Auto
Ram Voltage: 1.504V
Input Voltage: 1.845
LLC Setting: Auto
System Agent: Auto
AIO: Auto
DIO: Auto

Core Multiplier: 45
Vcore: 1.240
Uncore Multiplier: 35
Uncore Voltage: Auto
Ram Voltage: 1.504V
Input Voltage: 1.875
LLC Setting: Auto
System Agent: Auto
AIO: Auto
DIO: Auto

It took the chip 1.3Vcore/1.95VRIN to get into windows and be able to browse around at 4.6 ( it was getting late and I was pretty tired so I didn't test much). I will stabilize 4.4 an 4.5 before I attempt to go at 4.6 and above. Temps and voltage are acceptable at 4.5 (much more so than my previous 4770k) so I am pretty happy. again these are rather "dirty overclocks", so I will clean up, retest, take screenshots and update.

 

 

Quote:
Originally Posted by ham4ever View Post

heey
i am trying to OC 4670k

so far i tried alot but always end up bluescreen while playing BF3

so i started all over with :

Batch - L314B405 Malay
Core Multiplier: 42
Ring Multiplier:35
VID in bios was set : 1.176v
CPU Vcore in system: 1.188v
Ring Voltage auto
VRIN: auto in bios / in system 1.764V
Motherboard: GA-Z87-HD3 ( bios F6)
RAM voltage : 1.500V

and AIDA64 test for 1 hour temp reached 77 C



i did test with IBT stress level High and temp reached = 90 C eek.gifeek.gif




i am still trying to set more voltages to manual and tune stuff lil bit

what you guys think of this OC i had ?

 

 

Quote:
Originally Posted by mbakalski View Post

Username: mbakalski
CPU Model: 4770k
Core Multiplier: 45
CPU VID: 1.245
Vcore: 1.272
Uncore Multiplier: 39
Uncore Voltage: 1.220
Cooling Solution: Custom Loop
Stability Test: p95 Small FFTs 1 hr/IBT High - 10 pass/ BF4
Batch Number: 3333C Costa Rica
Ram Speed: 1866 Corsair Dominator GT 2x4GB
Ram Voltage: 1.50
Input Voltage: 1.92
LLC Setting: Auto
Motherboard: Z87-G65 [bios1.9]
System Agent:+.100v
AIO:+.100v
DIO:+100v
Nondelidded

I might try for more if I ever pop the lid open. Seems like a decent/a little better than average chip.

 

 

Quote:
Originally Posted by dervladimir View Post

Intermediate result:

Username: dervladimir
CPU Model: i5-4670K (CL under HS)
Core Multiplier: 47
CPU VID: 0.992V
Vcore: 1.385V
Uncore Multiplier: 43
Uncore Voltage: 1.300V
Cooling Solution: Custom Water
Stability Test: Lynx 0.6.5, memory 6144 and 30 runs
Batch Number: Malay, L327B895
Ram Speed: 2400MHz
Ram Voltage: 1.300V
Input Voltage: 1.880V
LLC Setting: Level 8
Motherboard: ASUS Maximus VI Formula

 

 

Quote:
Originally Posted by koekwau5 View Post


Don't see any improvement either.
It seems less intesive cuz I managed this with this following settings and much better temps =) :

Vcore: 1.275V
Cache: 1.200V
SA: 0.9V
Ev. Input: 1.8V
DRAM: 1.5V
PCH Core: 1.1V
PCH VLX: 1.575V
LLC: Level 6



Edit: I must say that the simple H105 watercooler is doing a great job! Awesome bang for buck cooling system =)

Edit 2: 3DMark 2013 also runs fine =) http://www.3dmark.com/3dm/2867988

 

 

Quote:
Originally Posted by Maintenance Bot View Post

Good guide thanks. Glad I found it.
Add me please.

CPU: 4770K
Core Multiplier: 44
CPU VID: 1.270
Vcore: 1.288
Uncore Multiplier: 39
Uncore Voltage: 1.120
Cooling Solution: Enermax Liqtech 240
Stability Test: 1hr Aida, BF4 10 hours
Batch Number: Costa Rica 3334C183
Ram Speed:1866 xmp 9-9-9-24
Input Voltage: 1.950
LLC Setting: Auto
Motherboard: MSI MPOWER

No picture.

 

Quote:
Originally Posted by sethiron View Post

First time OC'er and first post on this forum biggrin.gif
Thank you so much for this helpful guide

sethiron
4770k
Core Multiplier: 44x
CPU VID: 1.265
Vcore: 1.28
Uncore Multiplier: 39x
Uncore Voltage: 1.20
Cooling Solution: Noctua NH D-14

Stability Test:
Aida64 (CPU, FPU, cache) for ~8h
x264 Stability Test for ~10h
Realbench Stress Test for ~4h
Haven't tried many games yet, but played an unoptimized WildStar without any issues

Batch Number: Costa Rica 3403A823
Ram Speed: 2400 10-12-12-31-2N
Ram Voltage: stock (1.65)
Input Voltage: Input = 1.8, Eventual = 1.8
LLC Setting: set to level 8, Extreme
Motherboard: Asus Maximus VI Hero


Aida64 screen capture



x264 screen captures

 

 

Quote:
Originally Posted by Exilon View Post




Decided to be a bit more adventurous from my previous 4.2 GHz @ 1.25 V overclock.

After a couple of hours fiddling with voltages and multipliers, I gave up on 4.6 GHz with 4 cores and ended up with 46/46/45/45 turbo at 1.335 V non-AVX.

With AVX, voltage goes to ~1.43 V and my NH-D14 starts spinning up.



Looks like I'm voltage constrained so delidding isn't going to do anything.

Username: Exilon
CPU Model: i7-4770K
Core Multiplier: 45
CPU VID: 1.333
Vcore: 1.34
Uncore Multiplier: 39
Uncore Voltage: 1.15
Cooling Solution: NH-D14
Stability Test: Prime95, 4 hours, OCCT, 10 hours, 48+ hours of general use.
Batch Number: Malaysia L313B574
Ram Speed: 1600 MHz
Ram Voltage: 1.64
Input Voltage: 1.95
LLC Setting: 100%
Motherboard: Asus Z87-PRO

 

 

Quote:
Originally Posted by ludkoto View Post

Decided to post here finaly been reading the tread for long time started with sins guide thou.
This is the OC i am using now:
Username:ludkoto
CPU Model:i5 4670k not delided
Core Multiplier: x44
CPU VID: 1.3v (could run it at 1.28 but added 0.02 coz of BF4 smile.gif )
Vcore: 1.32v
Uncore Multiplier: x42
Uncore Voltage: 1.24v
Cooling Solution: CM Seidon 120v
Stability Test: IBT (Standart), XTU (bench + 2h stress test), Aida for 7h,
Cinebench, Realbench the x264 test 10 runs few times and Gaming (BF4, AC4 and some others)
Highest temp i get is from IBT low 90s rest are 70-80C gaming i think lower then 70 around 65C
Batch Number: L335C391
Ram Speed: [1333 haven't bought new one yet smile.gif
Ram Voltage: stock
Input Voltage: 2v
LLC Setting: Extreme
Motherboard: Z87 D3HP
Sorry for not having pic maybe when i have time to test again i'd put one biggrin.gif
I will try x46 latter i think i can get it stable at 1.42v considering i got x45 stable 1.37v (BF4 stable)
My CPU ain't from the good once but works for me since i can't change it i got some other OC profiles witch i've tested if its needed i can post them.
I mainly use the PC for gaming and reg stuff smile.gif
I think my OC is stable if you guys see something wrong shoot smile.gif
Got one quetion can go over then 2.1v for Input voltage like 2.15 ot somethin?

 

You have all been charted.
This took FOREVER.
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #11803 of 19599
I just want you to know it's appreciated, 'wizzie! One of these days I will get mine put together and get myself on this chart!
Fractal Formula
(23 items)
 
Corsair
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770k Asus Maximus V Formula GTX 670 FTW G.Skill Trident 
Hard DriveHard DriveHard DriveHard Drive
ocz vector ocz vertex III western Digital Black Western Digital Scorpio Black 
Hard DriveOptical DriveCoolingCooling
Seagate Asus BW-12B1ST/BLK/G/AS BDRW NZXT Kraken X40 Bgears B Blaster 140 fans 
CoolingCoolingCoolingOS
Arctic F14 140mm fans Corsair AF140 Swiftech H220 Windows 7 Pro 
MonitorKeyboardPowerCase
Sony kds60a3000 (har har) Tte Sports  Corsair AX860i Fractal Define R4 
MouseAudioOther
Tt eSPORTS THERON MO-TRN006DT Pioneer Elite Home Theater Setup iStarUSA BPU-126-SA-SAGE25P sataIII hot swap cage 
CPUMotherboardGraphicsRAM
i5 3570k Asus p8z77v deluxe GTX 670FTW g.Skill RipjawsX 
Hard DriveHard DriveHard DriveOptical Drive
Intel 330  Kingston Hyper x 3k  ocz vertex 3 lite-on dvdrw iHAS524-98 
CoolingCoolingCoolingCooling
Zalman cnps20lq  Corsair sp120 High performance Coolermaster 120mm blue led   Zalman 120mm pwm 
CoolingOSMonitorPower
Corsair sp120 high performance Windows 7 Pro 64 bit  Panasonic 42ST30 1080p 3D HDTV Corsair ax850 
Case
Corsair C70 Vengeance 
  hide details  
Reply
Fractal Formula
(23 items)
 
Corsair
(17 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770k Asus Maximus V Formula GTX 670 FTW G.Skill Trident 
Hard DriveHard DriveHard DriveHard Drive
ocz vector ocz vertex III western Digital Black Western Digital Scorpio Black 
Hard DriveOptical DriveCoolingCooling
Seagate Asus BW-12B1ST/BLK/G/AS BDRW NZXT Kraken X40 Bgears B Blaster 140 fans 
CoolingCoolingCoolingOS
Arctic F14 140mm fans Corsair AF140 Swiftech H220 Windows 7 Pro 
MonitorKeyboardPowerCase
Sony kds60a3000 (har har) Tte Sports  Corsair AX860i Fractal Define R4 
MouseAudioOther
Tt eSPORTS THERON MO-TRN006DT Pioneer Elite Home Theater Setup iStarUSA BPU-126-SA-SAGE25P sataIII hot swap cage 
CPUMotherboardGraphicsRAM
i5 3570k Asus p8z77v deluxe GTX 670FTW g.Skill RipjawsX 
Hard DriveHard DriveHard DriveOptical Drive
Intel 330  Kingston Hyper x 3k  ocz vertex 3 lite-on dvdrw iHAS524-98 
CoolingCoolingCoolingCooling
Zalman cnps20lq  Corsair sp120 High performance Coolermaster 120mm blue led   Zalman 120mm pwm 
CoolingOSMonitorPower
Corsair sp120 high performance Windows 7 Pro 64 bit  Panasonic 42ST30 1080p 3D HDTV Corsair ax850 
Case
Corsair C70 Vengeance 
  hide details  
Reply
post #11804 of 19599
Disabled VR Fault Management on my board and now I seem to be stable at 1.326 for 44X. This is with 1.92 input voltage, 1600 memory, and 35 cache ratio. Voltage jumps around a lot less with VR Fault Management disabled. Curious if I can work my way back down the voltage scale some. I'll submit for the chart later.
My System
(16 items)
 
  
CPUMotherboardGraphicsRAM
4770K at 4.4 (delidded) Asus Maximus VI Extreme EVGA 980ti SC X2 G.Skill Trident 2400 (2 X 8) 
Hard DriveOptical DriveCoolingOS
Samsung 830 256 GB SSD, Sandisk Extreme Pro 480... LG Blu-Ray Heatkiller CPU Rev4.0 Ni-BL; Aquacomputer Kyrog... Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
Dell U2713HM Filco Majestouch 2 Tenkeyless Corsair AX1200i Case Labs SM8 
MouseMouse PadAudioOther
Zowie ZA12 Artisan Zero Asus Xonar Essence STX APC Smart-UPS SMT1500 
  hide details  
Reply
My System
(16 items)
 
  
CPUMotherboardGraphicsRAM
4770K at 4.4 (delidded) Asus Maximus VI Extreme EVGA 980ti SC X2 G.Skill Trident 2400 (2 X 8) 
Hard DriveOptical DriveCoolingOS
Samsung 830 256 GB SSD, Sandisk Extreme Pro 480... LG Blu-Ray Heatkiller CPU Rev4.0 Ni-BL; Aquacomputer Kyrog... Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
Dell U2713HM Filco Majestouch 2 Tenkeyless Corsair AX1200i Case Labs SM8 
MouseMouse PadAudioOther
Zowie ZA12 Artisan Zero Asus Xonar Essence STX APC Smart-UPS SMT1500 
  hide details  
Reply
post #11805 of 19599
I know this is probably a dumb question, but im a noob lol sooo... every time I have downloaded x264 to stress test the file is not recognizable to my computer? Is there other software I need in order to use this file? what am i missing here?
The Pixel Slayer
(22 items)
 
HTPC
(14 items)
 
NAStrodamus
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5 4460 Asus Z97 Deluxe Intel On board  Kingston Hyper X 8GB (4GBx2) 
Hard DriveOptical DriveCoolingCooling
Samsung 850 EVO 250GB Pioneer BluRay Drive Noctua NH-L9i Noctua NF-S12A X3 
OSMonitorKeyboardPower
Win 10 Samsung 55" LED HDTV Rii 2.4GHz Wireless Mini EVGA G2 550W 
CaseMouse
Silverstone GD09 Rii 2.4GHz Wireless Mini 
  hide details  
Reply
The Pixel Slayer
(22 items)
 
HTPC
(14 items)
 
NAStrodamus
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5 4460 Asus Z97 Deluxe Intel On board  Kingston Hyper X 8GB (4GBx2) 
Hard DriveOptical DriveCoolingCooling
Samsung 850 EVO 250GB Pioneer BluRay Drive Noctua NH-L9i Noctua NF-S12A X3 
OSMonitorKeyboardPower
Win 10 Samsung 55" LED HDTV Rii 2.4GHz Wireless Mini EVGA G2 550W 
CaseMouse
Silverstone GD09 Rii 2.4GHz Wireless Mini 
  hide details  
Reply
post #11806 of 19599
Quote:
Originally Posted by DrockinWV View Post

I know this is probably a dumb question, but im a noob lol sooo... every time I have downloaded x264 to stress test the file is not recognizable to my computer? Is there other software I need in order to use this file? what am i missing here?

It's a compressed file, you'll need to download and use 7zip to extract it.
post #11807 of 19599
Thanks Forceman! I appreciate your help!!
The Pixel Slayer
(22 items)
 
HTPC
(14 items)
 
NAStrodamus
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5 4460 Asus Z97 Deluxe Intel On board  Kingston Hyper X 8GB (4GBx2) 
Hard DriveOptical DriveCoolingCooling
Samsung 850 EVO 250GB Pioneer BluRay Drive Noctua NH-L9i Noctua NF-S12A X3 
OSMonitorKeyboardPower
Win 10 Samsung 55" LED HDTV Rii 2.4GHz Wireless Mini EVGA G2 550W 
CaseMouse
Silverstone GD09 Rii 2.4GHz Wireless Mini 
  hide details  
Reply
The Pixel Slayer
(22 items)
 
HTPC
(14 items)
 
NAStrodamus
(14 items)
 
CPUMotherboardGraphicsRAM
Intel i5 4460 Asus Z97 Deluxe Intel On board  Kingston Hyper X 8GB (4GBx2) 
Hard DriveOptical DriveCoolingCooling
Samsung 850 EVO 250GB Pioneer BluRay Drive Noctua NH-L9i Noctua NF-S12A X3 
OSMonitorKeyboardPower
Win 10 Samsung 55" LED HDTV Rii 2.4GHz Wireless Mini EVGA G2 550W 
CaseMouse
Silverstone GD09 Rii 2.4GHz Wireless Mini 
  hide details  
Reply
post #11808 of 19599
Username: Marianpol
CPU Model: 4670k
Core Multiplier: 45x
CPU VID: 1.216
Vcore: 1.225
Uncore Multiplier: 40x
Uncore Voltage: 1.09
Cooling Solution: Delided, NH-D14
Stability Test: IBT Max x20, LinX 29k x20
Batch Number: L323C421 (Malay)
Ram Speed: 9-11-10-28 1T @ 2133
Ram Voltage: 1.65
Input Voltage: 1.8
LLC Setting: Extreme
Motherboard: Z87X-UD3H

post #11809 of 19599
Thread Starter 
Quote:
Originally Posted by Marianpol View Post

Username: Marianpol
CPU Model: 4670k
Core Multiplier: 45x
CPU VID: 1.216
Vcore: 1.225
Uncore Multiplier: 40x
Uncore Voltage: 1.09
Cooling Solution: Delided, NH-D14
Stability Test: IBT Max x20, LinX 29k x20
Batch Number: L323C421 (Malay)
Ram Speed: 9-11-10-28 1T @ 2133
Ram Voltage: 1.65
Input Voltage: 1.8
LLC Setting: Extreme
Motherboard: Z87X-UD3H

 

I'll chart you in a few minutes.

Quote:
Originally Posted by gdubc View Post

I just want you to know it's appreciated, 'wizzie! One of these days I will get mine put together and get myself on this chart!

Thanks :thumb:

 

 

---

The spreadsheet's graph has been updated. I forgot to update it last time.

AVERAGE OC 45.50 MEDIAN OC 45.00
AVERAGE VID 1.29 MEDIAN VID 1.28

Amount of overclock submissions: 161

 

 

(Stats listed in this post did not include Marianpol's entry but should be reflected in the actual chart itself. Don't forget the graph is located in the bottom of the chart.)

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #11810 of 19599
Username: JOE2108
CPU Model: 4670k
Core Multiplier: 45x
Vcore: 1.264
Uncore Multiplier: 36x
Uncore Voltage: -
Cooling Solution: Corsair H110 push Pull
Stability Test: AIDA Extreme
Batch Number: - (Malay)
Ram Speed: Corsair Veangance Pro @ 2133
Ram Voltage: 1.5
LLC Setting: Auto
Motherboard: GA-Z87X-OC




thanks.

just want to ask
I enable SpeedStep in the bios and features from 8x to 45x normal but Vcore always showed the highest position does not fall following SpeedStep.
It's normal on OC Condition or something missing? biggrin.gif
Edited by joe2108 - 4/18/14 at 9:20am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]