Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 178

post #1771 of 19539
Quote:
Originally Posted by Hyolyn View Post

I pass almost all the stress testing programs, but the minute i try prime my computer just bsod.
Still i can pass over an hour or more in XTU / AIDA64(Max Block Size) & IBT

Well i think anyway we all know it's individual on stability it really depends on what you use the computer for and all, personally i think i'm fine.
Also it's very normal for the SFC to find corrupt files, even if your pc won't crash there will be collecting corrupt settings and so on overtime, always running sfc scans can also cause trouble with settings.

I'm quite happy with my temps, it's only peaking 80-81 without delid and quite high voltages
same here. i couldn't get 4.4GHz stable with Prime95. i could pass 12+ hrs of XTU and 10+ hrs of H.264 and Crysis 3 entire campaign from start to end.

but i dropped the clocks to 4.3GHz which is Prime stable. i don't want to worry about the system crashing when i put some long job to finish overnight. besides, it is just 100MHz.

why would running SFC cause troubles? shouldn't the system files be unmodified by anything other than Windows Update? it is not resetting the settings, afaik. most of it is, if not all, are .sys files.
post #1772 of 19539
Quote:
Originally Posted by Anusha View Post

same here. i couldn't get 4.4GHz stable with Prime95. i could pass 12+ hrs of XTU and 10+ hrs of H.264 and Crysis 3 entire campaign from start to end.

but i dropped the clocks to 4.3GHz which is Prime stable. i don't want to worry about the system crashing when i put some long job to finish overnight. besides, it is just 100MHz.

why would running SFC cause troubles? shouldn't the system files be unmodified by anything other than Windows Update? it is not resetting the settings, afaik. most of it is, if not all, are .sys files.

Well it depends i guess, some users who don't pay for their windows sometimes uses SLIC and running sfc will remove it (:
I'm not familiar with Windows 8 but i know if you run into to bad of a file it might attempt to repair your windows and it will sometimes remove programs and so on, also people using modified dll's for various things such as theme's or whatever else, but if you are not running into any trouble with it then why not
post #1773 of 19539
Quote:
Originally Posted by Hyolyn View Post

Well it depends i guess, some users who don't pay for their windows sometimes uses SLIC and running sfc will remove it (:
I'm not familiar with Windows 8 but i know if you run into to bad of a file it might attempt to repair your windows and it will sometimes remove programs and so on, also people using modified dll's for various things such as theme's or whatever else, but if you are not running into any trouble with it then why not
I just checked my Windows 8 PC at work which has never seen a BSOD or a crash. This is a 9 month old installation. It didn't find any corrupted files. smile.gif
post #1774 of 19539
Quote:
What does this do? relating to the DISM command

look here http://technet.microsoft.com/en-us/library/hh824869.aspx

I too could not resist 8.1 Whats the big deal? Very little new or different.
Rocketfish
(14 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87-UD4H GTX460 1096MB 2 x 8Gig corsair 
Hard DriveOptical DriveCoolingOS
WD1500 Sandisk Extreme SSD128Gb 3X WD 500G SATA DVD Thermalright True Spirit 140 win8 
MonitorPowerCaseMouse
ASUS 22 and Soyo 22 LCD  Corsair TX 650W Rocketfish/Lain Li Trackball - Kensington 
  hide details  
Reply
Rocketfish
(14 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87-UD4H GTX460 1096MB 2 x 8Gig corsair 
Hard DriveOptical DriveCoolingOS
WD1500 Sandisk Extreme SSD128Gb 3X WD 500G SATA DVD Thermalright True Spirit 140 win8 
MonitorPowerCaseMouse
ASUS 22 and Soyo 22 LCD  Corsair TX 650W Rocketfish/Lain Li Trackball - Kensington 
  hide details  
Reply
post #1775 of 19539
dang xtu bench passed and cpu-z reports 1.4 for 4.5ghz redface.gif
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
post #1776 of 19539
Quote:
Originally Posted by HemiRick View Post

look here http://technet.microsoft.com/en-us/library/hh824869.aspx

I too could not resist 8.1 Whats the big deal? Very little new or different.
Ah that is to check if the source files are not tampered with, right? Source in the sense, the source of files which SFC restores from. Yeah, that's necessary too I guess. But probably not in the case of a BSOD?

Yeah very little change for the desktop users in 8.1.
post #1777 of 19539
has anyone just hit a wall trying to boot into windows with a next step up? I seem to be stable 4.5 ghz 1.35v, but I've never been able to get into windows at 4.6ghz all the way up to 1.4v. I realize I might not be able to have a reasonable voltage to have 46x stable, but I'd think i could at least log into windows.
post #1778 of 19539
Thread Starter 
Quote:
Originally Posted by lolwatpear View Post

has anyone just hit a wall trying to boot into windows with a next step up? I seem to be stable 4.5 ghz 1.35v, but I've never been able to get into windows at 4.6ghz all the way up to 1.4v. I realize I might not be able to have a reasonable voltage to have 46x stable, but I'd think i could at least log into windows.

I dunno...

I'm at 1.425v for 4.6, I can log into Windows at 4.7ghz at 1.43v I remember.

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #1779 of 19539
Quote:
Originally Posted by Anusha View Post

Ah that is to check if the source files are not tampered with, right? Source in the sense, the source of files which SFC restores from. Yeah, that's necessary too I guess. But probably not in the case of a BSOD?

Yeah very little change for the desktop users in 8.1.

DISM is what you want to use. SFC may find the corrupted files yet not be able to fix them everytime. You run into that problem, running DISM and then doing SFC you'll see all is sweet. Has never let me down (of course when I've done too much damage.. it's time to refresh). They won't fix registry if for some reason that goes berserk.
Just a 'puter
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS Maximus VIII Hero iGPU thanks to Nvidia 970 3.5GB Corsair Vengeance LPX CMK8GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Samsung 950 PRO 512GB Crucial M4 256GB RX360 V3 Koolance CPU-380I 
CoolingCoolingOSMonitor
Koolance RP-452X2 Reservoir Koolance PMP-450 12V Variable Speed Pump Windows 10 Pro x64 benq XL2411Z 
KeyboardPowerCaseMouse
logitech G510 Seasonic X-760 Corsair 800D Mionix Castor 
AudioAudio
Creative Sound Blaster X-Fi Titanium HD DT 990 Premium 250Ohm 
  hide details  
Reply
Just a 'puter
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS Maximus VIII Hero iGPU thanks to Nvidia 970 3.5GB Corsair Vengeance LPX CMK8GX4M2B3200C16 
Hard DriveHard DriveCoolingCooling
Samsung 950 PRO 512GB Crucial M4 256GB RX360 V3 Koolance CPU-380I 
CoolingCoolingOSMonitor
Koolance RP-452X2 Reservoir Koolance PMP-450 12V Variable Speed Pump Windows 10 Pro x64 benq XL2411Z 
KeyboardPowerCaseMouse
logitech G510 Seasonic X-760 Corsair 800D Mionix Castor 
AudioAudio
Creative Sound Blaster X-Fi Titanium HD DT 990 Premium 250Ohm 
  hide details  
Reply
post #1780 of 19539
yes finally stable at 4.5 xtu and aid passed , i just need to fix the Vcore spike voltage CPU 4.5 @ 1.376 it does spikes to 1.392 sometimes. any work around?

x45
Vcore 1.36
Vring 1.25
Vrin 1.9
C states all enable. if I disable C states I cannot passe any stress test above. cCPU-Z report 800Mhz idle, voltage never down voltage. it seems to stay around 1.376 . any input?
Edited by skyn3t - 9/2/13 at 8:23pm
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]