Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 180

post #1791 of 19637
Quote:
Originally Posted by Forceman View Post

What are you using to check the voltage? CPU-Z will not show the correct voltage with anything newer than 1.64.0, and with an Asus motherboard it may be difficult to find something that shows it accurately at all. You can try HWInfo, one of the weirdly named voltages may be Vcore.


here is the many software with volt reading, I know software is not accurate , I will probe it tomorrow if i can.




Below are my mobo probe point's smile.gif


Edited by skyn3t - 9/2/13 at 11:03pm
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
post #1792 of 19637
Quote:
Originally Posted by skyn3t View Post

in my loop i reach 84c on XTU and 95 on IBT. I'm just testing before my delid work smile.gif

I dont understand why my air cooler works better than your water loop. XTU CPU stress test only gets my CPU temp[ to peak for very short periods 74C max and most of the time its in the 60S while running the test and Im running 4.5 @ 1.215V !!
Edited by HemiRick - 9/2/13 at 10:54pm
Rocketfish
(14 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87-UD4H GTX460 1096MB 2 x 8Gig corsair 
Hard DriveOptical DriveCoolingOS
WD1500 Sandisk Extreme SSD128Gb 3X WD 500G SATA DVD Thermalright True Spirit 140 win8 
MonitorPowerCaseMouse
ASUS 22 and Soyo 22 LCD  Corsair TX 650W Rocketfish/Lain Li Trackball - Kensington 
  hide details  
Reply
Rocketfish
(14 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87-UD4H GTX460 1096MB 2 x 8Gig corsair 
Hard DriveOptical DriveCoolingOS
WD1500 Sandisk Extreme SSD128Gb 3X WD 500G SATA DVD Thermalright True Spirit 140 win8 
MonitorPowerCaseMouse
ASUS 22 and Soyo 22 LCD  Corsair TX 650W Rocketfish/Lain Li Trackball - Kensington 
  hide details  
Reply
post #1793 of 19637
Quote:
Originally Posted by HemiRick View Post

I dont understand why my air cooler works better than your water loop. XTU CPU stress test only gets my CPU temp[ to peak for very short periods 74C max and most of the time its in the 60S while running the test and Im running 4.5 @ 1.215V !!


This is my pick time now . I made a mistake in add XTU in my last post you quoted. instead XTU is Linx, so IBT, Linx and P95


post fixed now but two ppl, had quoted it already.tongue.gif
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
post #1794 of 19637
What's the current opinion on prime95 beta for stability tests?

This new version pushes my chip well into 95C like Linpack but unlike anything else (all other tests sit in mid 70s) and I don't want to leave it running for a 6 hr stability test that hot.

What would be a respbectable alternative stability test to run for proving an overclock?


I ask because I'm at rock solid 45x and I'd like to try 46x without delidding since I blew $25 on intel CPU insurance.
post #1795 of 19637
try XTU or AIDA
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
post #1796 of 19637
Quote:
Originally Posted by tomxlr8 View Post

What's the current opinion on prime95 beta for stability tests?

This new version pushes my chip well into 95C like Linpack but unlike anything else (all other tests sit in mid 70s) and I don't want to leave it running for a 6 hr stability test that hot.

What would be a respbectable alternative stability test to run for proving an overclock?


I ask because I'm at rock solid 45x and I'd like to try 46x without delidding since I blew $25 on intel CPU insurance.
AIDA64 I guess. But even on that, you have to run all the CPU together because FPU test will instantly make the CPU throttle. That's the only stress test I've seen throttle my CPU. This is up to 1.312V.
post #1797 of 19637
Been doing some basic tweaking on my 44770K the past few days but can´t seem to keep 4.4 stable, even with volt set at 1.3. Can boot into the system but when I start with IntelBurn Test the story is over fairly quickly.

Current settings for testing are multi core at 43 and manual volt 1,2 . Uncore multi is at 42 with volt on auto .
RAM on auto running at (1333). Volt is also on auto.

Getting max temps of 81/83 during stress test.

Batch L314B511

Playing around on a daily base to see what I can get out of this processor while reading. Had hoped 4.4/4.5 would be my sweet spot and I would slowly start to changed settings from auto to manual to fine tune my OC.
Game PC 2
(13 items)
 
All-round PC
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770K MSI Z87-G45 Gaming MSI GeForce GTX 770 4GB GAMING Crucial Ballistix Tactical BLT2C8G3D1608ET3LX0CEU 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO 250GB LG GH24NS90 Gelid Solutions Tranquillo Rev.2 Microsoft Windows 7 Professional SP1 (US, OEM, ... 
MonitorPowerCaseMouse
HP 22xi Seasonic M12II 850W 80+ Bronze Corsair Carbide 300R Logitech G600 
Mouse Pad
Dragon War GP-001 Gaming Mouse Mat (Speed Edition) 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 Black Edition Gigabyte GA-790XTA-UD4 Asus HD5850, 1GB GeIL 4GB 
Hard DriveOptical DriveCoolingOS
Samsung Spinpoint F3, 1TB Sony AD-7240S Scythe Mugen 2 Rev. B Windows 7 Professional 32bit 
MonitorKeyboardPowerCase
Dell 2310H Logitech MX3000 Antec TP-650 Langoon Dragonlord PC-K62 
Mouse
Logitech MX518 
  hide details  
Reply
Game PC 2
(13 items)
 
All-round PC
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4770K MSI Z87-G45 Gaming MSI GeForce GTX 770 4GB GAMING Crucial Ballistix Tactical BLT2C8G3D1608ET3LX0CEU 
Hard DriveOptical DriveCoolingOS
Samsung 840 EVO 250GB LG GH24NS90 Gelid Solutions Tranquillo Rev.2 Microsoft Windows 7 Professional SP1 (US, OEM, ... 
MonitorPowerCaseMouse
HP 22xi Seasonic M12II 850W 80+ Bronze Corsair Carbide 300R Logitech G600 
Mouse Pad
Dragon War GP-001 Gaming Mouse Mat (Speed Edition) 
CPUMotherboardGraphicsRAM
AMD Phenom II X4 955 Black Edition Gigabyte GA-790XTA-UD4 Asus HD5850, 1GB GeIL 4GB 
Hard DriveOptical DriveCoolingOS
Samsung Spinpoint F3, 1TB Sony AD-7240S Scythe Mugen 2 Rev. B Windows 7 Professional 32bit 
MonitorKeyboardPowerCase
Dell 2310H Logitech MX3000 Antec TP-650 Langoon Dragonlord PC-K62 
Mouse
Logitech MX518 
  hide details  
Reply
post #1798 of 19637
Quote:
Originally Posted by Ves View Post

Been doing some basic tweaking on my 44770K the past few days but can´t seem to keep 4.4 stable, even with volt set at 1.3. Can boot into the system but when I start with IntelBurn Test the story is over fairly quickly.

Current settings for testing are multi core at 43 and manual volt 1,2 . Uncore multi is at 42 with volt on auto .
RAM on auto running at (1333). Volt is also on auto.

Getting max temps of 81/83 during stress test.

Batch L314B511

Playing around on a daily base to see what I can get out of this processor while reading. Had hoped 4.4/4.5 would be my sweet spot and I would slowly start to changed settings from auto to manual to fine tune my OC.

whatttttttt it must be a hell of CPU 44770k intelalien made tongue.gif

I spend my day today trying to figure it out so finally I did and now I'm just tweak it a bit and see how it goes. so far it is running XTU for 2:30 hours and i'm using pc no crash . wink.gif
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
Black Hawk
(25 items)
 
  
CPUMotherboardGraphicsRAM
4770k - 13 B 666 Asus Maximus VI Formula 1080 SeaHawk EK | K|NGP|N  G.SKILL Ripjaws Series 8GB 
Hard DriveCoolingCoolingCooling
SAMSUNG 830 128GB raiD 0 rx 360 rx240 rx240 
CoolingCoolingCoolingCooling
Ek-Res X3 250mm Swiftech MCP35X2 COUGAR CF-V12HPB Vortex Lamptron FC9 
CoolingCoolingOSMonitor
Bitspower compression fittings koolance CPU 370 Windows 10 Pro Acer XB271HU ‑ 27" 
KeyboardPowerCaseMouse
Quick fire TK EVGA 1300g2 Corsair 800D MoDeD G502 
Mouse PadAudioOtherOther
Rosewill REACT XL Creative Sound Blaster Z Sennheiser HD 555  AKG K267 
Other
M-Audio BX5a 
  hide details  
Reply
post #1799 of 19637
Quote:
Originally Posted by Ves View Post

Been doing some basic tweaking on my 44770K the past few days but can´t seem to keep 4.4 stable, even with volt set at 1.3. Can boot into the system but when I start with IntelBurn Test the story is over fairly quickly.

Current settings for testing are multi core at 43 and manual volt 1,2 . Uncore multi is at 42 with volt on auto .
RAM on auto running at (1333). Volt is also on auto.

Getting max temps of 81/83 during stress test.

Batch L314B511

Playing around on a daily base to see what I can get out of this processor while reading. Had hoped 4.4/4.5 would be my sweet spot and I would slowly start to changed settings from auto to manual to fine tune my OC.

What's your input voltage? in your bios it's called vccin.
I have the same board and i need 1.275v for 4.5 but at that voltage i need a vccin of 1.80v
post #1800 of 19637
if you have an Asus board, disable multi core enhancement BY ALL MEANS!!!
it seems that it does more than just override the turbo mode. someone else also said (cannot remember where) that he had to disable it to stabilize the OC.

all of a sudden my CPU is kinda stable at 4.4/1.275V (in bios) with multi core enhancement disabled and a lot of EPU power saving features enabled. into 40min with Prime95 blend with 3 min per test.



i'm using very conservertive settings.

VCCIN @ 1.75V with LLC6
uncore x39 @ 1.08V
digi+ VRM settings: active frequency mode enabled, tuned to optimized not extreme.
memory at XMP 1600 9/9/9/24 1.5V except 1T timings (XMP means 2T)
all the C states enabled.

if this passed 1hr, i might stick with this OC. biggrin.gif
Edited by Anusha - 9/3/13 at 5:44am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]