Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 31

post #301 of 19539
The additional voltage is the start voltage to apply, it should not be 0.001 but the default voltage for your cpu. You see under it there is a total that your says it is 0.110 so when load applied, the adaptive state i guess is handling your vcore, but once idle, it sets it to 0.110 and that's why i guess you get the bsods. You don't need offset with adaptive. Just set the additional to whatever vcore you want and enable c states. at idle it will downvolt enough so that you don't get bsods.
MCP
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 4670k 4.5ghz@1.2v Gigabyte z97 gaming 3 MSI Radeon RX 480 Gaming X (waiting for Vega!) Corsair Vengeance LP 16gb 
Hard DriveHard DriveHard DriveCooling
Samsung 1TB Wester Digital 1TB Samsung 950 PRO 256GB Noctua NH-D14 
OSMonitorKeyboardPower
Windows 10 x64 Benq 24" LED FullHD (waiting for 27" 1440p 144h... Steelseries 6GV2 Corsair HX650 Gold 
CaseMouseMouse PadAudio
Segotep Raynor Steelseries Sensei RAW Steelseries Microlab M860 
  hide details  
Reply
MCP
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 4670k 4.5ghz@1.2v Gigabyte z97 gaming 3 MSI Radeon RX 480 Gaming X (waiting for Vega!) Corsair Vengeance LP 16gb 
Hard DriveHard DriveHard DriveCooling
Samsung 1TB Wester Digital 1TB Samsung 950 PRO 256GB Noctua NH-D14 
OSMonitorKeyboardPower
Windows 10 x64 Benq 24" LED FullHD (waiting for 27" 1440p 144h... Steelseries 6GV2 Corsair HX650 Gold 
CaseMouseMouse PadAudio
Segotep Raynor Steelseries Sensei RAW Steelseries Microlab M860 
  hide details  
Reply
post #302 of 19539
Quote:
Originally Posted by pandalin View Post

The additional voltage is the start voltage to apply, it should not be 0.001 but the default voltage for your cpu. You see under it there is a total that your says it is 0.110 so when load applied, the adaptive state i guess is handling your vcore, but once idle, it sets it to 0.110 and that's why i guess you get the bsods. You don't need offset with adaptive. Just set the additional to whatever vcore you want and enable c states. at idle it will downvolt enough so that you don't get bsods.
Guess that did the trick. Thanks. I feel like a total n00b.
post #303 of 19539
I change SP120 PE to H80i (orginal fans) and add some tim paste.

right now I am overclock:

core 44ghz
uncore 3.4 ghz
vcore 1.216

I don't know why that H80i is better than Sp120 PE. I am thinking that it is the samething but maybe not.

all core temp is below 80C . that is pretty good. I think. it is only 9 minutes. I know it is early for making stability test.

oh yeah, I am doing prime95 with blend.

update 2:

core and uncore are 44ghz
vcore 1.28
temp is 70c-85C
Edited by rickyman0319 - 8/8/13 at 10:33am
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
post #304 of 19539
Hi Guys,

I'm still testing 4.7 GHz. Now I'm running AIDA Stability test.. and I've got until now best results.. I have Vcore 1.250v and I'm running now almost 90 minutes and still okey.. Wish me luck. BTW: I read on first side, that test OC stability with AIDA64. It will need 12-24 hours, On youtube I found 6 hours AIDA and 6 hours Prime95. How long to stress it do you recommend? Is it enough to stress it with AIDA64 for 6 hours? thank you
post #305 of 19539
Quote:
Originally Posted by Ponteral View Post

Hi Guys,

I'm still testing 4.7 GHz. Now I'm running AIDA Stability test.. and I've got until now best results.. I have Vcore 1.250v and I'm running now almost 90 minutes and still okey.. Wish me luck. BTW: I read on first side, that test OC stability with AIDA64. It will need 12-24 hours, On youtube I found 6 hours AIDA and 6 hours Prime95. How long to stress it do you recommend? Is it enough to stress it with AIDA64 for 6 hours? thank you

Stress it overnight - Then start stressing it with the stuff you really use your PC with, unless that is staring at AIDA/PRIME all day long - If so, seek medical help wink.gif
Frozen Kaveri
(11 items)
 
 
CPUMotherboardGraphicsRAM
A10-7850K Gigabyte F2A88X-UP4 XFX R7 250 G.SKILL TridentX 2400Mhz CL9 
Hard DriveHard DriveHard DriveCooling
Samsung EVO 120GB Samsung EVO 120GB Crucial M500 240GB Little Devil Phasechange 
OSPowerCase
Windows 8.1 Corsair AX860i Lian Li PC-A51 
CPUMotherboardGraphicsRAM
4770K  ROG Maximus VI Impact HD 7990 Corsair Platinum 2666Mhz 
Hard DriveCoolingCoolingCooling
Samsung 830 SSD 3 x Alphacool NexXxoS UT60 240 EK Supremacy Precise Mount Add-On Naked Ivy CPU... EK Supremacy - Clean full nickel 
CoolingCoolingOSPower
Alphacool Heatmaster II Gentle Typhoon 1850RPM Windows 7 X64 Silverstone Strider Evolution 750W 
Case
Caselabs S3 w. pedestal 
  hide details  
Reply
Frozen Kaveri
(11 items)
 
 
CPUMotherboardGraphicsRAM
A10-7850K Gigabyte F2A88X-UP4 XFX R7 250 G.SKILL TridentX 2400Mhz CL9 
Hard DriveHard DriveHard DriveCooling
Samsung EVO 120GB Samsung EVO 120GB Crucial M500 240GB Little Devil Phasechange 
OSPowerCase
Windows 8.1 Corsair AX860i Lian Li PC-A51 
CPUMotherboardGraphicsRAM
4770K  ROG Maximus VI Impact HD 7990 Corsair Platinum 2666Mhz 
Hard DriveCoolingCoolingCooling
Samsung 830 SSD 3 x Alphacool NexXxoS UT60 240 EK Supremacy Precise Mount Add-On Naked Ivy CPU... EK Supremacy - Clean full nickel 
CoolingCoolingOSPower
Alphacool Heatmaster II Gentle Typhoon 1850RPM Windows 7 X64 Silverstone Strider Evolution 750W 
Case
Caselabs S3 w. pedestal 
  hide details  
Reply
post #306 of 19539
how long do you guys want it to be prime95 or aida in order to be on sheet?
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
post #307 of 19539
Thread Starter 
Quote:
Originally Posted by rickyman0319 View Post

how long do you guys want it to be prime95 or aida in order to be on sheet?

Technically there is no requirement on how long but when I put somebody on the sheet I expect 3 hours minimum. If you did 12 hours, tell me, or maybe a screenshot, and I'll post it as "Prime 12 hr". I'll list the most intensive stress test in the box for your name. The reason why I expect 3 hours or more is because I almost never get the data on how many hours a person stressed. If you insist on stressing, say, 1 hour, I just need to know you only did 1 hour and I'll adjust the data accordingly.

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #308 of 19539
this is what I got so far:

4.4ghz (uncore and core)
vcore 1.28

h80i + stock fans

most temp is around 75-85

get more info update when finish 3 hrs stress test or more

where can I look to see how long I did prime?
Edited by rickyman0319 - 8/8/13 at 12:51pm
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
post #309 of 19539
Quote:
Originally Posted by Ponteral View Post

Hi Guys,

I'm still testing 4.7 GHz. Now I'm running AIDA Stability test.. and I've got until now best results.. I have Vcore 1.250v and I'm running now almost 90 minutes and still okey.. Wish me luck. BTW: I read on first side, that test OC stability with AIDA64. It will need 12-24 hours, On youtube I found 6 hours AIDA and 6 hours Prime95. How long to stress it do you recommend? Is it enough to stress it with AIDA64 for 6 hours? thank you

Sounds like you got a better chip this time! I would recommend Intel Burn Test first because it is pretty fast and will tell you if you more or less in the right ball park. I do 20 runs on maximum memory. Then to fine tune it use Prime 95 blend for 5+ hours or OCCT test (not Linpack test, that is for heat generation) for 5+ hours. If you don't get any crashes you are pretty stable, if you do however you may have to either raise the voltage or lower the multiplier. I don't use Aida64 anymore because it doesn't detect instability as well as other stress tests. Besides my trial ran out a few weeks ago and I am certainly not paying for that program.
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
post #310 of 19539
Quote:
Originally Posted by rickyman0319 View Post

how long do you guys want it to be prime95 or aida in order to be on sheet?

Right now I wouldn't vouch for prime because as of writing this the latest can't test for AVX2 stability which the Haswell has, so even if it may report stability, you aren't stable.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]