Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 338

post #3371 of 19602
Thread Starter 
Quote:
Originally Posted by redshoulder View Post

Need help with adaptive setting on asus board, currently I have set it at manual voltage at 1.22v.

Proposed settings

1. cpu core voltage - adaptive mode
2.cpu core voltage offset - auto
3. additional turbo mode cpu core voltage - 1.22v

are these correct settings?
I'm not sure about cpu core voltage offset

I have another question
cpu-z and aisuite 3 show core voltage to be 1.232v whereas with the cpu-z built in with aida64 shows the correct voltage [1.22v]
Which is correct?

It's hard to tell. From readings it seems like Vcore load is higher than what you set into BIos by a lil' bit.

 

No adaptive/C states until overclock is already done.

I'm not sure about settings of your mobo. 

 

Quote:
Originally Posted by ChrisB17 View Post


Vrin is at 1.28
Vccin 1.89

And my temps only reach that for about 20 seconds on one of the primes tests. Average is about 80.

I'm dead tired. If you could list all your settings, Vring, uncore mult, etc, would be helpful. :D 


Edited by Darkwizzie - 10/1/13 at 8:49am
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #3372 of 19602
To ChrisB17

I think you are using to much Vring (1.28) if you mean Vring with Vrin. If you have high uncore ratio lower it. Something like 1.15 Vring should be OK.
Then I think, if you are giving enough Vcore you will have to try Vccin/Vrin form 1.78 to 1.88 in +0.01 increments.
I tested 3 I5-4670 K and none of them needed more than 1.81 Vccin/Vrin at 4,4 Ghz. This is with uncore ratio around 37-39. Ring voltage was not more than 1.13v.
Most of the time people with 2400 Ram have to raise System Agent, VCCIOD and VCCIOA something like 0.03, 0.03, 0.04.

Why do you use Prime 28.1 ? Is 27.9 not enough ?
Edited by Alxx - 10/1/13 at 9:04am
post #3373 of 19602
I must report some behaivour for vrin

quick testing with avx2 linx, i was experimenting with higher vrin (in the leagues of 1.85-2.0 + vrin for under 1.1vcore) and found a wide gap, while i could consistently fail tests with 1.88vrin for example, and pass np consistently on 1.6 - i saw a ~16% rise in cpu package power from dropping vrin like that. Something in the ratio's maybe, need more data had no idea it could be such a difference from going down
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
post #3374 of 19602
Quote:
Originally Posted by Darkwizzie View Post

It's hard to tell. From readings it seems like Vcore load is higher than what you set into BIos by a lil' bit.

No adaptive/C states until overclock is already done.
I'm not sure about settings of your mobo. 

I'm dead tired. If you could list all your settings, Vring, uncore mult, etc, would be helpful. biggrin.gif  


Here is a summary of my settings

For overclock, I just changed multiplier and core voltage.
Multiplier is set to 45 and core voltage in bios 1.22v
All other settings are set to default.
cpu-z shows voltage of 1.232v
cpu-z inbuilt with aida64 shows 1.22v

My main question is the about the cpu core voltage offset.
whether to leave it at auto and just set the turbo mode cpu core voltage at 1.22v .
Or is it more complicated and also provide an offset?
puter 2 - japan
(10 items)
 
   
CPUMotherboardGraphicsRAM
4770k 4.5ghz  asus gene vii vega 64 lc gskill trident x 16gb 2400  
Hard DriveCoolingCoolingMonitor
samsung 1tb 850evo, 500gb 840 evo h100igtx 4x 2150 gentle typhoon pwm dell u2713hm 
PowerCase
corsair ax860i phanteks evolv matx 
CPUMotherboardGraphicsRAM
i7-2600k asus p8p67 pro 6950cf 16gb gskill 
MonitorPowerCase
u2311h X 3 antec cp-850 antec 1200 
  hide details  
Reply
puter 2 - japan
(10 items)
 
   
CPUMotherboardGraphicsRAM
4770k 4.5ghz  asus gene vii vega 64 lc gskill trident x 16gb 2400  
Hard DriveCoolingCoolingMonitor
samsung 1tb 850evo, 500gb 840 evo h100igtx 4x 2150 gentle typhoon pwm dell u2713hm 
PowerCase
corsair ax860i phanteks evolv matx 
CPUMotherboardGraphicsRAM
i7-2600k asus p8p67 pro 6950cf 16gb gskill 
MonitorPowerCase
u2311h X 3 antec cp-850 antec 1200 
  hide details  
Reply
post #3375 of 19602





Here are my settings. Tried lowering VCC down to 1.6 -1.7 and I get rounding errors in prime.
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS Prime X370-Pro RX 580  CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  XSPC Raystorm Pro  
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS Prime X370-Pro RX 580  CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  XSPC Raystorm Pro  
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
post #3376 of 19602
Quote:
Originally Posted by ChrisB17 View Post



Any ideas of how to get this thing stable? Reset cmos and put in values again manually. Upped vcore and ring a little. Still getting this. mad.gifmad.gifmad.gifmad.gif
I see you are running blend test, so you are small fft stable? If not, try getting small fft stable first.

Before attempting blend test again, run these 2 blocks as single test: 3360k, 3584k. Ex, in prime 2.81, choose custom test, put min and max fft size 3360k, and time to run 15 minutes.

On my chip i was either 3360 stable but bsod on 3584, or 3584 stable but rounding errors on 3360. Finding balance between those 2 did it for me.
post #3377 of 19602
It fails within the first 3 mins of blend. Either freezes or says rounding error less than 4 over 5 or something like that.
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS Prime X370-Pro RX 580  CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  XSPC Raystorm Pro  
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS Prime X370-Pro RX 580  CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  XSPC Raystorm Pro  
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
post #3378 of 19602
Quote:
Originally Posted by ChrisB17 View Post

It fails within the first 3 mins of blend. Either freezes or says rounding error less than 4 over 5 or something like that.
But you are small fft stable i assume. Small fft is most important to test your core, blend is where you fine tune.

About your screens:
Do you really need that high SA, IOA, IOD? Tried running it with stock?
post #3379 of 19602
Yea stock it doesn't run better. I need that for the 2400 ram. I am out of ideas at this point. What I dont like is 1 day the PC is stable as a rock and the next day it isn't. Haswell is VERY odd when it comes to stability.
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS Prime X370-Pro RX 580  CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  XSPC Raystorm Pro  
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS Prime X370-Pro RX 580  CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  XSPC Raystorm Pro  
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
post #3380 of 19602
So how would you guys rate mine? At 4.7 ghz, 2400 mhz ram xmp profile 1, mine needs 1.348 according to cpu-z and it is fully stable (1.9 vccin). I really want it to be higher and it should be higher considering the 240 thick rad and 360 high fpi rad cooling it. No gpu in my loop either.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]