x43 still being stressed, 1hr of blend prime95 so far. no crashes/errors.
x44 boots into windows with the same settings as x43, but as soon as I hit start blend test on prime it bsods.
any settings you'd recommend tweaking to try for 4.4? don't really wana go over 80C though... so maybe no more vcore for me
e: not sure what to change now, maybe cpu input (vring)? up to 1.9? afaik that might be a bit more heat too. or maybe i will just call it a day and be happy with 4.3..
Run P95 with small fft at x43 for a couple of hours and see how you get on. (i'd actually recommend x264 1st as Wiz did, and it's a lot quicker). I'd also change your uncore to firstname.lastname@example.org for now.
What's your RAM set at?
Using x264 - If you aren't stable in x264 try upping vrin (input) by .01v at a time checking how far you get in x264. If by the time you get to circa 1.95vrin it's still not stable, or at a point when duration starts decreasing, drop vrin back down to 1.8v, increase vcore by .005v and repeat. Might work, might not, did for me.
Completely. I found the opposite with mine. Dropping uncore/ram to take them out of the equation, the only BSOD i got whilst doing core was 101. When core was solid the only BSOD i got was 124 when bringing up uncore. For me, 101 was vrin/vcore and 124 vrin/vring/sa/iod.