Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 45

post #441 of 19540
And here's something mildly interesting...my Hero reads the memory timings wrong. I manually set it to what's on the box (10-12-12-31) and it goes a little longer before BSOD.

But the box does not give the Command Rate. It was defaulting to 1. I manually set that to 2, and that got me much, much farther along in the AIDA stability test, relatively speaking anyway. Up from 30 seconds to over 6 minutes.

Just thought I'd throw that one out there as another variable to control for.
post #442 of 19540
Quote:
Originally Posted by Ponteral View Post

Thanks guys,

HWinfo is the same like HW monitor. They show VID 1.260, but Vcore 1.280V. It also shows 1.260V on Vcore, it is on the minimal value... It's realy confusing...

I'll have to try a few of the monitoring progs later while checking with the multimeter & see which is actually the closest. Software all show slightly different values, & then the actual voltage is usually a bit different yet from what all the software shows.
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #443 of 19540
Darkwizzie, I have a new OC setting that I want to submit with picture verification. Thanks!

BangBangPlay

CPU: i5-4670K
Core Multi: 46
Core Voltage: 1.223V
Uncore Multi:42
Uncore Voltage: 1.213V
Cooler: H100i
Stability: Prime 95, IBT, OCCT
Batch: 313
Ram Speed: 1600 MHz XMP
Picture Verified: Yes


(Larger Pictures here and here)

Here is a manual Linpack run;

Edited by BangBangPlay - 8/9/13 at 8:52pm
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
post #444 of 19540
I think I have a bad chip, I oced 4.5ghz (1.25-1.30) and uncore is x36 w/ auto voltage.

right now I am trying to find out what is my 4.5ghz is. I think 1.312. everytime I put 1.25-1.29, it boots but go to prime95, it reboots itself.
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
post #445 of 19540
Quote:
Originally Posted by BangBangPlay View Post

Darkwizzie, I have a new OC setting that I want to submit with picture verification. Thanks!

BangBangPlay

CPU: i5-4670K
Core Multi: 46
Core Voltage: 1.223V
Uncore Multi:42
Uncore Voltage: 1.213V
Cooler: H100i
Stability: Prime 95, IBT, OCCT
Batch: 313
Ram Speed: 1600 MHz XMP
Picture Verified: Yes


(Larger Pictures here and here)

how do u use adaptive voltage?

do u chose enable overrider voltage or disable it?
Edited by rickyman0319 - 8/9/13 at 5:45pm
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
post #446 of 19540
Thread Starter 
Quote:
Originally Posted by BangBangPlay View Post

Darkwizzie, I have a new OC setting that I want to submit with picture verification. Thanks!

BangBangPlay

CPU: i5-4670K
Core Multi: 46
Core Voltage: 1.223V
Uncore Multi:42
Uncore Voltage: 1.213V
Cooler: H100i
Stability: Prime 95, IBT, OCCT
Batch: 313
Ram Speed: 1600 MHz XMP
Picture Verified: Yes


(Larger Pictures here and here)

Excellent, results charted and updated.

 

 

Quote:
Originally Posted by rickyman0319 View Post


how do u use adaptive voltage?

do u chose enable overrider voltage or disable it?
 
In BIOS set power mode to adaptive. Enable C states in bios. Set C state to c7. Might have to change windows power settings to balanced, but I didn't have to. Do not do synthetic stress on adaptive.
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #447 of 19540
Hmm, my 5ghz screen not update worthy, must shoot for 5.1Ghz now... biggrin.gif
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #448 of 19540
I tried to set the Core Voltage to 1.300V and HWMonitor will show increase in Voltage whether in Manual or Adaptive when running RealBench. Why is it so?

Manual - from 1.300V increasing to 1.344V
Adaptive - from 1.300V increasing to 1.392V


post #449 of 19540
Quote:
Originally Posted by rickyman0319 View Post

how do u use adaptive voltage?

do u chose enable overrider voltage or disable it?

Huh, you definitely don't have an Asus motherboard. I would guess that you still want to enable the override or it will be set on auto rules, but that could mean manual too. What options do you have for entering your CPU core voltage? On Asus boards it gives you the option to select Auto, Manual, or Adaptive input for both core and uncore voltage. I use Manual to stress test and then once I have my final stable voltage (1.223V for example) I switch it to Adaptive and enter the same value as my Max Turbo Voltage. I don't use an offset, so I leave those options alone. As for Uncore I currently keep it manual because it doesn't seem to generate any extra heat, or fluctuate much.

The whole point of Adaptive is to not have your voltage stay fixed at max all the time like it would with Manual input. Adaptive will change the voltage with the different c states depending on your usage. It is just a way of saving power and lowering idle temps a bit. If you are going to run Adaptive then you should enable C States too. But yeah, every board is different and their lingo also varies in the UEFI BIOS. Your manufacturer may call it something different, or use a totally different system. Some new BIOS' are convoluted and full of sometimes too many options, settings, and tweaks IMO. I like that Asus is pretty simple on the surface, and to the point.
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
post #450 of 19540
I got asus gyrtpon motherboard.

Extreme OV
CPU Core Votlage
CPU Core voltage overrider
offset Mode Sign
Cpu Core Voltage Offset
Edited by rickyman0319 - 8/9/13 at 6:54pm
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
Encoder PC
(12 items)
 
3D movies
(9 items)
 
HTPC/Gaming PC
(11 items)
 
CPUMotherboardGraphicsRAM
4770k asus grphton  4550 4GB (2x2GB) Adata Gaming  
Hard DriveCoolingCoolingOS
1x 750GB, WD 640GB, 4x 1TB ( 3x Seagate 1TB & 1... EK Supreme HF (acteal/nickel) Phobya NB Eloop fans  Windows 7 
PowerCaseOtherOther
antec BP 550w SM8 ST30 240 UT60 
MotherboardGraphicsRAMHard Drive
ASUS M5A99X EVO AM3+  3450 gskill DDR3-1600 Western Digital  
Hard DriveCoolingCoolingOS
Western Digital  Corsair H50 corsair SP120 Windows 7 
Case
Caselab M8 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]