Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 46

post #451 of 19539
I've tried messing with other settings than just vcore and multiplier, it looks like you really need to start messing with VRIN when you get higher vcore. Currently running P95 (been 3 hours already, I want to complete 6 hours) at 4.7GHz with 1.34v but with 2V VRIN. 1.05v 35 uncore and LLC to extreme with all c-states enabled and turbo off, rest is pretty much the defaults on my motherboard. even 1.95v vrin would crash after about 30 min, even my 1.33v with 1.8v vring lasted longer lol vrin is just as important as vcore it seems!
junkman
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-4770K @ 4600MHz ASUS Z97-A/USB 3.1 HIS R9 280 IceQ X² OC @ 1200/1500MHz HIS R9 280 IceQ X² OC @ 1200/1500MHz 
RAMHard DriveHard DriveHard Drive
G.SKILL F3-2133C9D-16GXH @ 2400MHz 10-12-12-31-1T Crucial MX300 275GB SAMSUNG Spinpoint F3 1TB SAMSUNG Spinpoint F3 1TB 
CoolingCoolingCoolingOS
[CPU] Noctua NH-D14 (NF-P14/NF-P12) [GPU1] Asetek 570LC (Gentle Typhoon AP-30) [GPU2] Asetek 570LC (Gentle Typhoon AP-30) Windows 7 Professional 64-bit 
MonitorMonitorPowerCase
ViewSonic XG2401 Dell UltraSharp U2713H EVGA SuperNOVA 1300 G2 CORSAIR 300R 
Other
Scythe Kaze Q-12 Fan Controller 
  hide details  
Reply
junkman
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-4770K @ 4600MHz ASUS Z97-A/USB 3.1 HIS R9 280 IceQ X² OC @ 1200/1500MHz HIS R9 280 IceQ X² OC @ 1200/1500MHz 
RAMHard DriveHard DriveHard Drive
G.SKILL F3-2133C9D-16GXH @ 2400MHz 10-12-12-31-1T Crucial MX300 275GB SAMSUNG Spinpoint F3 1TB SAMSUNG Spinpoint F3 1TB 
CoolingCoolingCoolingOS
[CPU] Noctua NH-D14 (NF-P14/NF-P12) [GPU1] Asetek 570LC (Gentle Typhoon AP-30) [GPU2] Asetek 570LC (Gentle Typhoon AP-30) Windows 7 Professional 64-bit 
MonitorMonitorPowerCase
ViewSonic XG2401 Dell UltraSharp U2713H EVGA SuperNOVA 1300 G2 CORSAIR 300R 
Other
Scythe Kaze Q-12 Fan Controller 
  hide details  
Reply
post #452 of 19539
Thread Starter 

Anybody else got comments on Vrin?

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #453 of 19539
Quote:
Originally Posted by Bartouille View Post

I've tried messing with other settings than just vcore and multiplier, it looks like you really need to start messing with VRIN when you get higher vcore. Currently running P95 (been 3 hours already, I want to complete 6 hours) at 4.7GHz with 1.34v but with 2V VRIN. 1.05v 35 uncore and LLC to extreme with all c-states enabled and turbo off, rest is pretty much the defaults on my motherboard. even 1.95v vrin would crash after about 30 min, even my 1.33v with 1.8v vring lasted longer lol vrin is just as important as vcore it seems!

It definitely comes into play more at higher multipliers (4.6 and up). Leaving it auto is not
a good idea unless you leave Uncore ratio very low. I noticed that higher Uncore ratios also need a touch higher core voltage too, so it is a revolving door so to speak. Fine tuning can become time consuming and exhausting with all of the changes. But it is worth it knowing you have performance and reliability.
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
post #454 of 19539
Quote:
Originally Posted by Darkwizzie View Post

Anybody else got comments on Vrin?
i increased the VRIN from auto (somewhere around 1.7V) to 1.8V and dropped Vcore to 1.270V which was the point I started getting rounding off errors in Prime. This time after about 2hrs, I got a BSOD. perhaps those rounding off errors are a caused by the lack of VRIN? i will test 1.280V which still gave me rounding off errors with VRIN at AUTO.
post #455 of 19539
Here's a question I don't think I'm going to like the answer to....

I reset Everything except memory timings back to stock/auto. With nothing else running, AIDA shows my CPU VID 1.1323v, CPU Core 1.130. CPU-Z reports similar - Core Voltage 1.136.

Does this indicate I lost the silicon lottery big-time?
post #456 of 19539
Quote:
Originally Posted by luckymatt View Post

Here's a question I don't think I'm going to like the answer to....

I reset Everything except memory timings back to stock/auto. With nothing else running, AIDA shows my CPU VID 1.1323v, CPU Core 1.130. CPU-Z reports similar - Core Voltage 1.136.

Does this indicate I lost the silicon lottery big-time?

I am not touching this one. Bump...
Quote:
Originally Posted by rickyman0319 View Post

I got asus gyrtpon motherboard.

Extreme OV
CPU Core Votlage
CPU Core voltage overrider
offset Mode Sign
Cpu Core Voltage Offset

Lol, I should have looked at your rigs, sorry. You must have the ATX version right? It seems the settings are a little different. I disable extreme OV and just below it select Adaptive for the CPU Core Voltage Mode. Once that is selected "Additional Turbo Mode CPU Core Voltage" option appears below offset. There I enter my max voltage of 1.223V. I have never seen an option for override, but have heard others talk about it with other manufacturers.
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
Sager NP6350
(9 items)
 
   
CPUMotherboardGraphicsRAM
Intel i7-3630QM Clevo W350ETQ Nvidia GTX 660M 12 GB Samsung DDR3 1600 MHz 
Hard DriveHard DriveOptical DriveOS
Crucial M4 256 GB WD Black 750 GB Toshiba DVD-RW Drive Windows 7 (64 bit) 
Monitor
LG Phillips 
  hide details  
Reply
post #457 of 19539
Quote:
Originally Posted by luckymatt View Post

Here's a question I don't think I'm going to like the answer to....

I reset Everything except memory timings back to stock/auto. With nothing else running, AIDA shows my CPU VID 1.1323v, CPU Core 1.130. CPU-Z reports similar - Core Voltage 1.136.

Does this indicate I lost the silicon lottery big-time?

It's not the worst (some are 1.18ish) but it's not the best, no. But a low VID isn't a guarantee of good overclocking, it just indicates potential. Try something reasonable like 4.5 @ 1.25V and see what happens. If you get that stable, then you are looking pretty good.
post #458 of 19539
Thread Starter 

I tried 2.0 Vrin, 1.45v Vcore for x47 multiplier. I set ring bus to stock, ring bus voltage to stock, ram to non-overclocked state. I'm locking up 2 minutes into Chess. :'( Hitting peak temperature of 91C at chess. With chess my voltage is bumped to 1.486.

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #459 of 19539
I think with high multipliers like that you'll need extra Vring, even with it at stock speed. I wish I felt more comfortable with higher Vcore like that, om reluctant to go over 1.35V even with good temps.
post #460 of 19539
What's up guys,

Need some help here. I hit a sort of wall at 4.5 ghz with my ram running at 2400 mhz.

Here's what I've got now:

Mult 45x
Uncore 40x
vCore: 1.25v
RAM Frequency: 2400 mhz
RAM Voltage: 1.65v
Everything else is auto: VRIN, Uncore Voltage, etc.

When i go up to 46x, even when i raise vCore to 1.29v I'll crash. Any tips?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]