Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 547

post #5461 of 19540
Quote:
Originally Posted by Darkwizzie View Post


Hey, appreciate the compliment.
From what I have heard, 3b is ram related not CPU related. That's interesting. I'll do a quick thread search for 3b but I still suspect ram. The CPU OC bsod codes are 101, 124, 9c.

Ok good to know! Ran 5 loops of x264 no bsod. Max temp was 55-62 with 4.2 cpu, 1.24 vcore, 34 uncore and 86% vdroop setting. Is it safe to keep it at 86% for everyday use / gaming? Or is that mainly for testing purposes? Im going to increase cpu multi until im no longer stable with these settings then slowly increase vcore and check for stability etc. Il report back if i get that 3b error again.

Edit-I was assuming cpu vdroop offset control in msi bios was the llc setting I was supposed to change, I was in a rush when I did it. Correct me if im wrong.
Edited by Germx3 - 11/15/13 at 4:27pm
post #5462 of 19540
Common BSOD Error Codes for Overclocking
0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is
on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
on i7 32nm SB, usually means too little vCore
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
post #5463 of 19540
Thread Starter 

Yeah well, that list seems outdated to me.

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #5464 of 19540
Quote:
Originally Posted by Darkwizzie View Post

Keep stability test runs under 95C max.
Darkwizzie, when you say stability test runs, i know you're not a fan of the "hot" synthetics, so do you mean here when using X264 keep temps under 95C, or you mean when using Linpak/IntelBurnTest/Prime95 keep temps under 95C?

Thanks!
post #5465 of 19540
It's taking 1.41 on vcore just to run the xtu test for my 4.8 ghz... Why does that seem so much higher than most everyone else? Also tempo are hitting 90 C with 960mm of rad space solely cooling the cpu... I have to say I expected better results.

My pc froze about 30 min into the xtu stress test. Going to work on it in the mornin.. Seems 5 ghz won't happen.
post #5466 of 19540
^It's hard to say how your chip is without a few optimized profiles. Just jumping straight to 1.4+ vcore, or even 1.3+ i think it's a bit tricky to know if you're at the lowest volts you could be, considering vrin etc. What do you have set for it? Touched your SA/IO volts? At clocks that require 1.4v+ for me for example, i'd have to finely tune VRIN (with llc on it) and also play with SA and DIO for anywhere near optimal results
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
post #5467 of 19540


This my settings
CPU : 4770K (no delid) (L310B490)
Clock : 4.6ghz /4.3ghz
Uncore : 1.280v (bios)
Vid : 1.35v (bios)
Vring : 1.9v (default by Asrock)
Memory : 11-12-12-30-1T @2400 (default 2133 11-11-11-30-2t) Patriot Viper 3 Red 16gb (8x2)
Mobo : Asrock z87 extreme 4
Cooling : H50 Modded add reservoir
PSU : 700watt OCZ

I tried to up the core to 48 but no luck with the voltage probably need more than 1.35v .. but overall this is quite good for daily use. My cooling isnt that good also.. so i will stick my volt as low as possible.

Cheers.
post #5468 of 19540
do you think a stock i7-4770k bottlenecks my x2 Sapphire 7970 Ghz Vapor-X ? or overclocking will give them more space. I tried multiple times to overclock my cpu, but I always get blue screens (blue screen makes me panic). jj from Asus says adaptive voltage is the way to go. but my friend says manual. who is right?.
post #5469 of 19540
CPU Model: 4770k
Core Multiplier: 43x
CPU VID: 1.2v
Vcore: 1.212v
Input Voltage: 1.8v
Uncore Multiplier: 39x
Uncore Voltage: 1.162v
Cooling Solution: h80i
Stability Test: 5 Passes x264, Cinebench, AIDA64 Memory and Cache Benchmark
Ram Speed: XMP-2400 10 12 12 31

I was having a hard time getting anything to stick without massive CPU VID, then I pumped the Input Voltage (Eventual Voltage on my VI Impact) to 1.8v, this seemed to give me a bit more juice. I've read to try to keep this +0.5v of your VCore. Tomorrow morning when I have the ambient temps down to about 15C I will see how far I can get this to run. I'm going to give this a go with adaptive and try some daily driving.
Edited by Okt00 - 11/16/13 at 2:51pm
Node
(14 items)
 
Struct
(15 items)
 
 
Reply
Node
(14 items)
 
Struct
(15 items)
 
 
Reply
post #5470 of 19540
Quote:
do you think a stock i7-4770k bottlenecks my x2 Sapphire 7970 Ghz Vapor-X ?

Some games are CPU bound, some are GPU bound. You're more likely to run into a CPU bound situation at a higher FPS
Quote:
I tried multiple times to overclock my cpu, but I always get blue screens

Blue screen is supposed to happen, the only way to avoid them is to use a conservative overclock with far too much voltage, which is terrible practice. Nothing wrong with a bluescreen or 10 or even 100 while setting an overclock, it's supposed to happen til you get good and optimized settings.

Manual for setting OC and sometimes 24/7 afterwards, depends on your motherboard
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]