Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 619

post #6181 of 19603
Quote:
Originally Posted by taem View Post

I'm completely new to overclocking and I had a question.

Asus Z87 Pro and i5 4670k. I'm only messing with multiplier, voltage, and cache. Cache is set to 38 and hasn't been adjusted.

So I got to 4.6 at 1.263 voltage. I think it could go slightly lower but I haven't had time to test. But as is, I think that's a good result, no? But my concern is temp. After 16 hours of prime95, temps ran in the 80s Celsius, peaking at 86c.

Is that too high? Seems high to me. Idles at 24-29c. It's a barebones system ATM so I haven't been able to see game loads etc.

Of I take it down to 4.4 I can go 1.13 volts (might be able to go lower) and prime95 will peak at 63c. I'm thinking that's probably the better option?

Cooler is a D14 with 2500rpm TY 143s so I can't improve much there.

Prime will always produce unrealistic temps - you will almost never see those kinds of temps during actual real-world usage....There have been many alternative stability tests that have been suggested in this thread that will give you a better idea of temps you'll see during actual usage scenarios.... thumb.gif
post #6182 of 19603
Quote:
Originally Posted by creos7 View Post

it seems you have RealBench v2..... I have 1.05. Where did you get yours from?

I got it from a link a few pages back. I'll see if I can find it for ya

found the link smile.gif

http://www.necrosan.com/rog/RealBench/RealBench_v2.0b10_RC6_public_beta.rar
post #6183 of 19603
Thread Starter 
Quote:
Originally Posted by sonic2911 View Post

@darkwizze: my uncore vol is 1.2 not 1.3

Fixed

 

Quote:
Originally Posted by GrimReaperhdi View Post

Is batch number L314B506 a good 4770K ?

Just buyed this one with MSI GD65 Gaming Z87 and H110 140 mm W cooler.
Gskill 1866 Mhz Cas 9

Once every thing is mounted in my Corsair obsidian 750D I will share my results.

Read original thread please. Thanks for sharing results in future.

 

Quote:
Originally Posted by taem View Post

I'm completely new to overclocking and I had a question.

Asus Z87 Pro and i5 4670k. I'm only messing with multiplier, voltage, and cache. Cache is set to 38 and hasn't been adjusted.

So I got to 4.6 at 1.263 voltage. I think it could go slightly lower but I haven't had time to test. But as is, I think that's a good result, no? But my concern is temp. After 16 hours of prime95, temps ran in the 80s Celsius, peaking at 86c.

Is that too high? Seems high to me. Idles at 24-29c. It's a barebones system ATM so I haven't been able to see game loads etc.

Of I take it down to 4.4 I can go 1.13 volts (might be able to go lower) and prime95 will peak at 63c. I'm thinking that's probably the better option?

Cooler is a D14 with 2500rpm TY 143s so I can't improve much there.

 

 

Average OC listed in chart.
As long as you don't brake the temps I stated in thread, you're fine.
Quote:
Originally Posted by ImJJames View Post

Just an update

CPU Multi: 43
Cache Multi: AUTO(39)
Vcore Volt: 1.3
Cache Volt: 1.275
Vrin Volt: 1.9
Hyperthreading: ON

Memory XMP OFF
Memory Frequency: 1600mhz
1.5volts
Batch #3313B
Costa Rica
Hyper Evo 212 Cooler

2 hours Prime95 blend test stable Version 27.9

 

 

Quote:
Originally Posted by fleetfeather View Post

Username: fleetfeather
CPU Model: 4770k
Core Multiplier: 4.4
CPU VID: 1.32
Vcore: 1.34
Input Voltage: 1.90
Uncore Multiplier: 35x
Uncore Voltage: 1.20
Cooling Solution: h100i push-pull
Stability Test: x264 20 passes
Batch Number: L315B632
Ram Speed: 2133 9-11-11 screeny on my 16th run (Click to show)

never bothered with uncore, will probs hold higher since i'm feeding 1.2v lol. new chip next week biggrin.gif

 

 

Quote:
Originally Posted by wutangjn12 View Post

Username: wutangjn12
CPU Model: 4770k
Core Multiplier: x45
CPU VID: 1.28
Vcore: 1.282
Input Voltage: 1.98
Uncore Multiplier: 35
Uncore Voltage: auto
Cooling Solution: Noctua U14S
Stability Test: 10hrs P95 Blend Default
Batch Number: [Not required but helps people.]
Ram Speed: 2133mhz CL9 - Corsair dominator platinum 16gb 2x8

Max temps are at 86c on prime 95 default blend test for 10+ Hrs
I hope to push this chip to 4.6-4.7 and then i will be very pleased, i can achieve 4.4ghz at like 1.23~ are the other voltages i should look at other than CPU Input voltage and Vcore? i dont wanna lower my ram speeds, cause i paid for the speeds im running at. Any tips to help push this chip a little further will help. Overall i can easily do 4.4ghz at 1.23~ so im happy




.

 

You'll all be charted... soon. Ish SOON. I PROMISE.

I'm very busy right now, I'll get to it.


Edited by Darkwizzie - 11/29/13 at 9:00pm
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #6184 of 19603
Quote:
Originally Posted by szeged View Post

having some cinebench funsies with my new ram lol


Boss
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770k @ 4.1Ghz  Asus z87-Plus XFX Double D r9 290X G Skill Sniper 8GB @ 2133 
OSMonitorKeyboardMouse
Windows 10 Pro 27 Inch 1440P PLS @ 110Hz Mechanical Keyboard MX Red Steelseries Kana 
Mouse PadAudio
Steelseries Mouse pad Samson SR850 Headphones/Asus Xonar Sound card 
  hide details  
Reply
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770k @ 4.1Ghz  Asus z87-Plus XFX Double D r9 290X G Skill Sniper 8GB @ 2133 
OSMonitorKeyboardMouse
Windows 10 Pro 27 Inch 1440P PLS @ 110Hz Mechanical Keyboard MX Red Steelseries Kana 
Mouse PadAudio
Steelseries Mouse pad Samson SR850 Headphones/Asus Xonar Sound card 
  hide details  
Reply
post #6185 of 19603
I hate my chip....I need 1.35 volts to boot to 4.5ghz without bsod....
Edited by ImJJames - 11/29/13 at 9:36pm
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770k @ 4.1Ghz  Asus z87-Plus XFX Double D r9 290X G Skill Sniper 8GB @ 2133 
OSMonitorKeyboardMouse
Windows 10 Pro 27 Inch 1440P PLS @ 110Hz Mechanical Keyboard MX Red Steelseries Kana 
Mouse PadAudio
Steelseries Mouse pad Samson SR850 Headphones/Asus Xonar Sound card 
  hide details  
Reply
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770k @ 4.1Ghz  Asus z87-Plus XFX Double D r9 290X G Skill Sniper 8GB @ 2133 
OSMonitorKeyboardMouse
Windows 10 Pro 27 Inch 1440P PLS @ 110Hz Mechanical Keyboard MX Red Steelseries Kana 
Mouse PadAudio
Steelseries Mouse pad Samson SR850 Headphones/Asus Xonar Sound card 
  hide details  
Reply
post #6186 of 19603
Quote:
Originally Posted by szeged View Post

having some cinebench funsies with my new ram lol


Boss
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770k @ 4.1Ghz  Asus z87-Plus XFX Double D r9 290X G Skill Sniper 8GB @ 2133 
OSMonitorKeyboardMouse
Windows 10 Pro 27 Inch 1440P PLS @ 110Hz Mechanical Keyboard MX Red Steelseries Kana 
Mouse PadAudio
Steelseries Mouse pad Samson SR850 Headphones/Asus Xonar Sound card 
  hide details  
Reply
My Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770k @ 4.1Ghz  Asus z87-Plus XFX Double D r9 290X G Skill Sniper 8GB @ 2133 
OSMonitorKeyboardMouse
Windows 10 Pro 27 Inch 1440P PLS @ 110Hz Mechanical Keyboard MX Red Steelseries Kana 
Mouse PadAudio
Steelseries Mouse pad Samson SR850 Headphones/Asus Xonar Sound card 
  hide details  
Reply
post #6187 of 19603
Quote:
Originally Posted by Scotty Mac View Post

I got it from a link a few pages back. I'll see if I can find it for ya

found the link smile.gif

http://www.necrosan.com/rog/RealBench/RealBench_v2.0b10_RC6_public_beta.rar
ah it's a beta... i think i'll wait for the ROG ASUS site to be updated though i hope they do it soon! smile.gif
just a bit uneasy downloading from other sites, i'm not familiar with necrosan at all
post #6188 of 19603
Quote:
Originally Posted by blaze2210 View Post

You'll know for sure once you start overclocking it.... thumb.gif Haswell isn't like the older CPU's - where the quality was dependent on the batch that it came from. If you check out various sites on the 'net, you'll see this....So far, the most common indicator of a good overclocking CPU is what the default vcore is at - the lower the initial vcore, the higher the OC....Looking forward to seeing some results, happy overclocking! cheers.gif

Doesn't the chart the OP has contradict that? The higher overclocks have higher VIDs. Just curious.
My System
(12 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 Asrock B350 Fatal1ty ITX Asus GTX1060 G.Skill 8gb 3000mhz 
Hard DriveOptical DriveOSMonitor
250gb Samsung 850 Pro SATA LG DVD Burner Windows 10 Pro X64 23" Asus 144hz 
KeyboardPowerCaseMouse
Microsoft Ergonomic 4000 EVGA 500w Gold EVGA Hadron Air Logitech G Pro 
  hide details  
Reply
My System
(12 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 Asrock B350 Fatal1ty ITX Asus GTX1060 G.Skill 8gb 3000mhz 
Hard DriveOptical DriveOSMonitor
250gb Samsung 850 Pro SATA LG DVD Burner Windows 10 Pro X64 23" Asus 144hz 
KeyboardPowerCaseMouse
Microsoft Ergonomic 4000 EVGA 500w Gold EVGA Hadron Air Logitech G Pro 
  hide details  
Reply
post #6189 of 19603
Quote:
Originally Posted by ImJJames View Post

I hate my chip....I need 1.35 volts to boot to 4.5ghz without bsod....

Which BSOD and what are you doing with vrin/vrin llc? 1.3+vcore won't work too well with default LLC. Actually, my 1.27vcore OC is not stable with default VRIN, i have to increase it by either turbo/extreme llc to stop droop, or just raw numbers - and chips are much more VRIN-sensitive at higher vcores.

I think the question you should be asking is: What multi am i stable with using ~1.22-1.25vcore, and then go from there. Blindly throwing yourself into higher-oc territory says little about chip quality, especially as they become more individual when pushed harder

Quote:
The higher overclocks have higher VIDs

"VID" in the chart means the value you set in bios. Haswell IVR targets higher voltage than you set, such as 1.325vid reading 1.344vcore under load. I think Darkwizzie just wanted to graph it for more data on that (to see if it was the same for everyone) or just for visibility, so that people don't report different vcores for effectively the same voltage settings
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
post #6190 of 19603
Quote:
Originally Posted by creos7 View Post

ah it's a beta... i think i'll wait for the ROG ASUS site to be updated though i hope they do it soon! smile.gif
just a bit uneasy downloading from other sites, i'm not familiar with necrosan at all

I'm hesitant to download anything LOL. Tis why I'm not doing the new driver for nvidia cards. I'll wait for the WHQL version before I update. I never tried that ROG before.. So i decided to. Kinda like that Catalyst (CatZilla) benchmark. I don't like that fact you have to pay to even do a 720p benchmark. even tho it's only 48 cents. I don't like paying for anything! lol
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]