Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 642

post #6411 of 19539
Quote:
Originally Posted by Cyro999 View Post

Realbench seems worse than my just manually encoding with updated encoder.

It does some other stuff, but the luxmark for example - i have to manually stop it, and run it myself, where i can't loop it, because it runs on my gtx770 instead of my CPU. The other stuff that realbench does doesn't seem that hard, and the encoder version they run is old and fighting for CPU time, so it's not as hard on CPU either

double check you are using the beta realbench version from this november.
post #6412 of 19539
Quote:
Originally Posted by error-id10t View Post

So, any negatives in using High Performance power plan vs. Balanced? If I change Min CPU Power to 5% then it drops to 800MHz just like normally. I don't use C states anymore, I find C3 completely useless while C6/C7 are nice as you do get that ~0.16v but at idle you're not saving that much power.

Reason I ask is because in Balanced mode, even though C states are off, there is some lag/impact on SSD reads. I've made sure all of the LPM + HIPM/DIPM stuff is off so I don't know why. It goes away in Performance mode even with that Min CPU Power @ 5%.

So besides the negative I listed (don't get 0.16v @ Idle), anything else?

That's really weird. I use Balanced, customized for my liking with the sleep and display off times and such, but there's no impact on SSD performance for me. And I leave all the C-States at auto and force C6/C7 on. You should check out the advanced settings. There might be something there that can help you.

I don't use high perf unless I'm testing an OC. Because I want the CPU to be at full speed when it's being tested.
post #6413 of 19539
Argh, this is crazy. I've been stable for weeks. I even ran AIDA64 two nights ago for validation:

45x with 40x uncore
1.370V Vcore with 1.200V VRING + 1.900V VRIN
AIDA64 for 13 hours; average load temp was 64C and max was 84C (75% of the time, it was below 68C)

Today, I played BF4 for about 5 hours (like most days these past month, lol) and got a 101 BSOD (my first BSOD in weeks!). Wuuuuuuuuuuuuut. From looking at the thread, the general consensus is that VRIN causes 101? I bumped VRIN to 1.950V, so we'll see.

But maybe it's Vcore. Anybody gotten and solved a 101 BSOD?
The 2013 Build
(14 items)
 
  
CPUMotherboardGraphicsRAM
--- SOLD --- --- SOLD ---  --- SOLD --- --- SOLD --- 
Hard DriveOptical DriveCoolingOS
Samsung 850 EVO 500GB ASUS DRW-24B3ST (24X DVD burner) Noctua NH-U14S w/ NH-T1 TIM Windows 10 Pro (x64) 
MonitorKeyboardPowerCase
ASUS VG248QE w/ Lightboost @ 120Hz Ducky Shine III (MX Brown w/ Red backlights) Kingwin LZP-1000 (1000W) PSU Corsair Carbide Air 540 
Mouse Pad
Razer Goliathus (Precision Control model) - Sta... 
  hide details  
Reply
The 2013 Build
(14 items)
 
  
CPUMotherboardGraphicsRAM
--- SOLD --- --- SOLD ---  --- SOLD --- --- SOLD --- 
Hard DriveOptical DriveCoolingOS
Samsung 850 EVO 500GB ASUS DRW-24B3ST (24X DVD burner) Noctua NH-U14S w/ NH-T1 TIM Windows 10 Pro (x64) 
MonitorKeyboardPowerCase
ASUS VG248QE w/ Lightboost @ 120Hz Ducky Shine III (MX Brown w/ Red backlights) Kingwin LZP-1000 (1000W) PSU Corsair Carbide Air 540 
Mouse Pad
Razer Goliathus (Precision Control model) - Sta... 
  hide details  
Reply
post #6414 of 19539
Quote:
Originally Posted by ikjadoon View Post

Argh, this is crazy. I've been stable for weeks. I even ran AIDA64 two nights ago for validation:

45x with 40x uncore
1.370V Vcore with 1.200V VRING + 1.900V VRIN
AIDA64 for 13 hours; average load temp was 64C and max was 84C (75% of the time, it was below 68C)

Today, I played BF4 for about 5 hours (like most days these past month, lol) and got a 101 BSOD (my first BSOD in weeks!). Wuuuuuuuuuuuuut. From looking at the thread, the general consensus is that VRIN causes 101? I bumped VRIN to 1.950V, so we'll see.

But maybe it's Vcore. Anybody gotten and solved a 101 BSOD?

101 is vcore related, it needs to be increased....
post #6415 of 19539
Or vrin. wink.gif
post #6416 of 19539
Quote:
Originally Posted by Doug2507 View Post

Or vrin. wink.gif

Not vrin (vccin), but it could be ring voltage....


0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is
on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
on i7 32nm SB, usually means too little vCore
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
post #6417 of 19539
Quote:
Originally Posted by Doug2507 View Post

Or vrin. wink.gif

Yeah, that's been my experience.

What's your Vrin LLC set to?
post #6418 of 19539
Quote:
Originally Posted by blaze2210 View Post

Not vrin (vccin), but it could be ring voltage....


0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is
on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
on i7 32nm SB, usually means too little vCore
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

Yet again that's been posted and it's still not relevant to Haswell. thumb.gif

Quote:
Originally Posted by Forceman View Post

Yeah, that's been my experience.

What's your Vrin LLC set to?

Not sure if that's aimed at me or the OP? (presume the OP!)
post #6419 of 19539
Thanks for the replies. Yeah, Vcore and VRIN seem like the ones people refer to. I don't think it's VRING, as that is only for the uncore, AFAIK.
Quote:
Originally Posted by Forceman View Post

Yeah, that's been my experience.

What's your Vrin LLC set to?

Extreme, the highest I can set it to. I've had it set to Extreme for a while now. I guess I should just run with 1.950V VRIN (over 1.900V) and see where it takes me. If I BSOD again, I'll drop it back to 1.900V and up the Vcore.
The 2013 Build
(14 items)
 
  
CPUMotherboardGraphicsRAM
--- SOLD --- --- SOLD ---  --- SOLD --- --- SOLD --- 
Hard DriveOptical DriveCoolingOS
Samsung 850 EVO 500GB ASUS DRW-24B3ST (24X DVD burner) Noctua NH-U14S w/ NH-T1 TIM Windows 10 Pro (x64) 
MonitorKeyboardPowerCase
ASUS VG248QE w/ Lightboost @ 120Hz Ducky Shine III (MX Brown w/ Red backlights) Kingwin LZP-1000 (1000W) PSU Corsair Carbide Air 540 
Mouse Pad
Razer Goliathus (Precision Control model) - Sta... 
  hide details  
Reply
The 2013 Build
(14 items)
 
  
CPUMotherboardGraphicsRAM
--- SOLD --- --- SOLD ---  --- SOLD --- --- SOLD --- 
Hard DriveOptical DriveCoolingOS
Samsung 850 EVO 500GB ASUS DRW-24B3ST (24X DVD burner) Noctua NH-U14S w/ NH-T1 TIM Windows 10 Pro (x64) 
MonitorKeyboardPowerCase
ASUS VG248QE w/ Lightboost @ 120Hz Ducky Shine III (MX Brown w/ Red backlights) Kingwin LZP-1000 (1000W) PSU Corsair Carbide Air 540 
Mouse Pad
Razer Goliathus (Precision Control model) - Sta... 
  hide details  
Reply
post #6420 of 19539
Quote:
Originally Posted by Doug2507 View Post

Yet again that's been posted and it's still not relevant to Haswell. thumb.gif

And you know this through testing? Because through the course of my overclocking, that list helped me gain stability.....thumb.gif
Quote:
Originally Posted by ikjadoon View Post

Thanks for the replies. Yeah, Vcore and Vring seem like the ones people refer to. I don't think it's VRING, as that is only for the uncore, AFAIK.
Extreme, the highest I can set it to. I've had it set to Extreme for a while now.

It seems that in some cases, the ring voltage gets grouped in with vcore BSOD codes....
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]