Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 685

post #6841 of 19539
Quote:
Originally Posted by Alxx View Post

So, CPU not delidded ??

do you think once I delid cpu think I will get 5ghz? thumb.gif I know temps will be knocked down like -20c for sure lol and already at 1.34v
was stable at 4.8ghz 1.43v but went back to 4.7ghz
post #6842 of 19539
Quote:
Originally Posted by NightHawk06 View Post

Nope not just yet thumb.gif Soon will be and will post Results if everything turns out good not breaking it yessir.gif

With those Temps You might just leave it like that. My CPU is similar to yours 4.6 Ghz 1.305 vcore.
Highest Temp is 75 C° in Battlefield 3 after several hours. Not delidded. But my CPU cooler is not the best just a Mugen2.
So I left it at 4.6 1.305v. for the moment. Anyhow You have a nice CPU. smile.gif

Edit : 5 Ghz is very rare
If You need 1.43 Vcore for 4.8 Ghz I seriously doubt that you can reach 4.9-5.0 GHz stable. It would require insane Vcore - 1.5 for 4.9 ???
Edited by Alxx - 12/13/13 at 10:36am
post #6843 of 19539
Quote:
Originally Posted by Alxx View Post

With those Temps You might just leave it like that. My CPU is similar to yours 4.6 Ghz 1.305 vcore.
Highest Temp is 75 C° in Battlefield 3 after several hours. Not delidded. But my CPU cooler is not the best just a Mugen2.
So I left it at 4.6 1.305v. for the moment. Anyhow You have a nice CPU. smile.gif

Edit : 5 Ghz is very rare
If You need 1.43 Vcore for 4.7 Ghz I seriously doubt that you can reach 4.9-5.0 GHz stable. It would require insane Vcore - 1.5 for 4.9 ???
But never mind you have a good CPU there.


that not bad almost 4.7ghz biggrin.gif maybe throw a water cooler on that bad boy bet u get 4.7 4.8ghz thumb.gif
and ya I kinda like to push 4.8-5ghz if possible idk if Delid my cpu will get me any Higher OC but like
to see those Temps go -20c after get everything setup! I tried 4.9ghz at 1.44v disabled all Power CPU saving and I tested for bout 4hrs
then Crashed was at 1.45v at time and didnt know if that was safe going over 1.45v+ so I backed off to 4.7 1.34v
post #6844 of 19539
If You delid and use liquid metal between die and heatspreader temps will get 20 C° lower when under load sometimes even more. Many People reported this. I made the same experience. Delidded my first 4670K (1.33@ 4.4 Ghz) temps improved -20 C° after delidding.
Got a 4770K yesterday, will test it tomorrow. The one CPU that I am going to keep will then be delidded for max core overclocking. biggrin.gif
Edited by Alxx - 12/13/13 at 10:59am
post #6845 of 19539
Thread Starter 

THankfully I have no desperate need to delid. My temps are within reason and any higher voltage is getting scary for both Vrin required and the Vcore required... from a degradation standpoint due to high voltage. Temps were never the problem. That solves my indecisiveness around that issue long ago so I'm not conflicted on what action to take. :thumbsups

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #6846 of 19539
I think You made perfectly right decison there. biggrin.gif
post #6847 of 19539
Quote:
Originally Posted by Alxx View Post

If You delid and use liquid metal between die and heatspreader temps will get 20 C° lower when under load sometimes even more. Many People reported this. I made the same experience. Delidded my first 4670K (1.33@ 4.4 Ghz) temps improved -20 C° after delidding.
Got a 4770K yesterday, will test it tomorrow. The one CPU that I am going to keep will then be delidded for max core overclocking. biggrin.gif

ya I just bought this stuff PRO Liquid should be getting it sometime today just waiting and i will not be using the heatspreader stock gonna use Naked Ivy Mount that will even bring -20++ results for sure lol... did you use that ultra stuff and got -20c improvment? I decided to go wit PRO I hear its pretty good!
Sweet I plan on buying a 4770k here soon if they have any sales before Christmas this rig is for my Wife and its complete stable at these Results not sure if that fine but tested 15hrs temps never went above 73c last core was only 63c biggrin.gif

Cpu ratio 4.7ghz 1.34v NB Freq 4.5ghz ring voltage 1.280v reads 1.310v hwmonitor



post #6848 of 19539
I use Coolaboratory Liquid Ultra for delidding.
And be careful when delidding, you don't want to destroy your CPU wink.gif
post #6849 of 19539
Quote:
Originally Posted by Alxx View Post

I use Coolaboratory Liquid Ultra for delidding.
And be careful when delidding, you don't want to destroy your CPU wink.gif

sweet ya I got that stuff but its PRO. and this aint the first time my friend lol done it on like 10+ chips
My last chip was a I7 3770k had it OC at 5ghz when Delid voltage of 1.42 or 1.45 cant remember but it was beast
Sold it for alot of money wit the whole rig biggrin.gif
post #6850 of 19539
Did not know You were in Pro league biggrin.gifthumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]