Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 759

post #7581 of 19580
Quote:
Originally Posted by Darkwizzie View Post

Charted. What heatsink, batch, ram setting?
You've only run realbench for one hour. While you might be stable, I recommend running it for a longer period of time.

You've already been charted, but I'd be careful of going any higher on that Vring. 

what you suggest for the vring bro? and how high ican go ? thaanks .
Edited by soulbytes - 12/29/13 at 10:51pm
post #7582 of 19580
Hi I need a little help on getting stable. I passed the Intel burn test 20 passes at maximum. Also ran the benchmark in Intel XTU 5 times no crash. But playing an hour or more of bf4 and bluescreen. And for some reason setting my cache ratio to 40 made me more stable. Settings I have are below.




Edited by EliteGhost - 12/29/13 at 11:04pm
post #7583 of 19580
@eliteghost have you tried run hyperpi 32mb ? And run an hour or two xtu stress test cpu and memory see if its stable. Cheers
post #7584 of 19580
4670K @ 5GHz



post #7585 of 19580
Quote:
Originally Posted by The Real Deal View Post

4670K @ 5GHz




Use the form in the op preeze
post #7586 of 19580
Quote:
Originally Posted by The Real Deal View Post

4670K @ 5GHz




Nice!!
post #7587 of 19580
Don't think DW will chart that based on a Pi run...
post #7588 of 19580
Can you please add me to the list OP.

Username:shweller
CPU Model:i5 4670K
Core Multiplier: X46
CPU VID: 1.24v
Vcore: 1.26v
Uncore Multiplier: x34
Uncore Voltage: Auto
Cooling Solution: Custom Loop (Raystorm Block)
Stability Test: IBT Very High 10 pass 814.69 seconds
Batch Number: 310 MALAY
Ram Speed: 1600mhz CL9
Input Voltage: 1.90v
Motherboard: Gigabyte Z87X UD4H
post #7589 of 19580
Quote:
Originally Posted by Shweller View Post

Can you please add me to the list OP.

Username:shweller
CPU Model:i5 4670K
Core Multiplier: X46
CPU VID: 1.24v
Vcore: 1.26v
Uncore Multiplier: x34
Uncore Voltage: Auto
Cooling Solution: Custom Loop (Raystorm Block)
Stability Test: IBT Very High 10 pass 814.69 seconds
Batch Number: 310 MALAY
Ram Speed: 1600mhz CL9
Input Voltage: 1.90v
Motherboard: Gigabyte Z87X UD4H


Thats a good chip i am new to intel overclocking. But my chip so far need these setting to get to 4.3Ghz
CPU Model:i5 4670K
Core Multiplier: X43
CPU VID: 1.20v
Vcore: 1.30v
Uncore Multiplier: x35
Input Voltage 1.91
I ran prime95 small FFT for 3:30 hours n so far no problems intelburn test on high for 10 loops
post #7590 of 19580
Hey guys i'm need of Help lol I'm trying to get 4.9ghz stable and IDK whats going I use IBT and it tells me its stable at all kinds of Voltage was stable before under 1.4v on IBT
then ran Prime95 crashes right! When I go into bios change CPU voltage Offset to -10 lets say it reads on Hwmonitor IA 3.XXX w/e when I use + offset it goes back to 1.XXX w/e can I use both - and +?? is it suppose to do that or do I not need to worry bout IA?

My temps never go above 70c LOL



New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]