Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 799

post #7981 of 19536
Quote:
Originally Posted by KennethO View Post

That's why I suggested SA/IO even tho it most likely will have no effect.

So if you're expecting it to have no effect, why suggest a random increase in voltage? Those particular voltages only need to be adjusted on an "if needed" basis, and its better to go in smaller increments.
post #7982 of 19536
It can help locate if that is the problem. And if it helped stabilize then you would go back to your previous setting and slowly up it. I didn't say to leave it at that. And .15 is well within safe limits.
post #7983 of 19536
Yeah I think IMC as well. I do have to point out 4.4 will not boot into windows at even 1.3. My point was at 1.32 it boots to windows 44x. This is past my comfort level and with h100i not a good idea. Temps were like 92 ish. By the way it is stable at 1600 but not at 1866 which because i'm stuck @ 4.2 really i want to try and get to 1866 which is just rated speeds anyway.
Test Bench
(13 items)
 
  
CPUMotherboardGraphicsRAM
6700k ASUS ROG STRIX Z270G Nvidia GTX 1060 Corsair Vengeance LPX 16GB DDR4 DRAM 3000MHz 
Hard DriveCoolingOSMonitor
MyDigital BPX CoolerMaster Master Liquid 240 windows 10 x64 pro Viewsonic xg2703-gs 
KeyboardPowerCaseMouse
Logiech G413 Corsair rm650x Test Bench Logitech G403 
Audio
Logitech G533 
  hide details  
Reply
Test Bench
(13 items)
 
  
CPUMotherboardGraphicsRAM
6700k ASUS ROG STRIX Z270G Nvidia GTX 1060 Corsair Vengeance LPX 16GB DDR4 DRAM 3000MHz 
Hard DriveCoolingOSMonitor
MyDigital BPX CoolerMaster Master Liquid 240 windows 10 x64 pro Viewsonic xg2703-gs 
KeyboardPowerCaseMouse
Logiech G413 Corsair rm650x Test Bench Logitech G403 
Audio
Logitech G533 
  hide details  
Reply
post #7984 of 19536
Quote:
Originally Posted by Darkwizzie View Post

I'm using the Noctua MX4 paste that came with the D14. Not bad and free. Held off on my friend's offer for Arctic Silver.

MX-2, MX-4 and PK1 are some of the best TIMs ever made...
 
FPS Death Machine
(15 items)
 
 
CPUMotherboardGraphicsRAM
Q6600 @ 3.905 GHz Gigabyte GA-EP45-UD3R EVGA SuperClocked GTX 660 4GB Kingston Hyper X DDR 2 
Hard DriveHard DriveOptical DriveCooling
Western Digital VelociRaptor Western Digital Caviar Black 1 Pioneer AIO Prolimatech Megahalems 
OSMonitorKeyboardPower
7 Ultimate x64 ASUS VH232H Microsoft Rosewill CAPSTONE-650  
CaseMouseMouse Pad
Antec 300 [MOD IN PROGRESS] CM Xornet Elvis 
  hide details  
Reply
 
FPS Death Machine
(15 items)
 
 
CPUMotherboardGraphicsRAM
Q6600 @ 3.905 GHz Gigabyte GA-EP45-UD3R EVGA SuperClocked GTX 660 4GB Kingston Hyper X DDR 2 
Hard DriveHard DriveOptical DriveCooling
Western Digital VelociRaptor Western Digital Caviar Black 1 Pioneer AIO Prolimatech Megahalems 
OSMonitorKeyboardPower
7 Ultimate x64 ASUS VH232H Microsoft Rosewill CAPSTONE-650  
CaseMouseMouse Pad
Antec 300 [MOD IN PROGRESS] CM Xornet Elvis 
  hide details  
Reply
post #7985 of 19536
GA-Z87X-UD5H / 4770K delidded w/CLP BIOS F8e mod 2
4x4GB 2400 RAM 11-13-13-30

This is my second 4770K and I'm pretty happy with it.....

x46 = 1.800 Vrin / 1.26 Vcore / 1.055 Vring / x35 uncore
x47 = 1.800 Vrin / 1.31 Vcore / 1.055 Vring / x35 uncore
x48 = 1.800 Vrin / 1.33 Vcore / 1.055 Vring / x35 uncore
x49 = 1.900 Vrin / 1.40 Vcore / 1.055 Vring / x35 uncore
x50 = (Haven't done any long term testing of 5.0 so not sure what it takes to get it stable.)

I can bump uncore to x39 and it helps a little with benchmarks, >39 and it starts going backwards. I just leave it on Auto now and the latest BIOS keeps it on x35.
All C states Auto except C6/C7 which are set "Enabled" for that nice low idle vcore.
post #7986 of 19536
You could try to work on just tightening your timings if you can't get to 1866. Since 1600 with something like 7-8 would beat 1866 @ 9. AlsoI'm not sure if it has been asked. Is your ram at 1T or 2T. Try 2T, can help some times.
post #7987 of 19536
Quote:
Originally Posted by mandrix View Post

GA-Z87X-UD5H / 4770K delidded w/CLP BIOS F8e mod 2
4x4GB 2400 RAM 11-13-13-30

This is my second 4770K and I'm pretty happy with it.....

x46 = 1.800 Vrin / 1.26 Vcore / 1.055 Vring / x35 uncore
x47 = 1.800 Vrin / 1.31 Vcore / 1.055 Vring / x35 uncore
x48 = 1.800 Vrin / 1.33 Vcore / 1.055 Vring / x35 uncore
x49 = 1.900 Vrin / 1.40 Vcore / 1.055 Vring / x35 uncore
x50 = (Haven't done any long term testing of 5.0 so not sure what it takes to get it stable.)

I can bump uncore to x39 and it helps a little with benchmarks, >39 and it starts going backwards. I just leave it on Auto now and the latest BIOS keeps it on x35.
All C states Auto except C6/C7 which are set "Enabled" for that nice low idle vcore.

Awesome oc's. Those 4770's crush.

What's your cooling solution? Sheesh, didnt see it. doh.gif
 
FPS Death Machine
(15 items)
 
 
CPUMotherboardGraphicsRAM
Q6600 @ 3.905 GHz Gigabyte GA-EP45-UD3R EVGA SuperClocked GTX 660 4GB Kingston Hyper X DDR 2 
Hard DriveHard DriveOptical DriveCooling
Western Digital VelociRaptor Western Digital Caviar Black 1 Pioneer AIO Prolimatech Megahalems 
OSMonitorKeyboardPower
7 Ultimate x64 ASUS VH232H Microsoft Rosewill CAPSTONE-650  
CaseMouseMouse Pad
Antec 300 [MOD IN PROGRESS] CM Xornet Elvis 
  hide details  
Reply
 
FPS Death Machine
(15 items)
 
 
CPUMotherboardGraphicsRAM
Q6600 @ 3.905 GHz Gigabyte GA-EP45-UD3R EVGA SuperClocked GTX 660 4GB Kingston Hyper X DDR 2 
Hard DriveHard DriveOptical DriveCooling
Western Digital VelociRaptor Western Digital Caviar Black 1 Pioneer AIO Prolimatech Megahalems 
OSMonitorKeyboardPower
7 Ultimate x64 ASUS VH232H Microsoft Rosewill CAPSTONE-650  
CaseMouseMouse Pad
Antec 300 [MOD IN PROGRESS] CM Xornet Elvis 
  hide details  
Reply
post #7988 of 19536
Quote:
Originally Posted by crashdummy35 View Post

Awesome oc's. Those 4770's crush.

What's your cooling solution? Sheesh, didnt see it. doh.gif
Thanks.
Cooling is a bunch of radiators & pumps. biggrin.gif
post #7989 of 19536
Quote:
Originally Posted by mandrix View Post

GA-Z87X-UD5H / 4770K delidded w/CLP BIOS F8e mod 2
4x4GB 2400 RAM 11-13-13-30

This is my second 4770K and I'm pretty happy with it.....

x46 = 1.800 Vrin / 1.26 Vcore / 1.055 Vring / x35 uncore
x47 = 1.800 Vrin / 1.31 Vcore / 1.055 Vring / x35 uncore
x48 = 1.800 Vrin / 1.33 Vcore / 1.055 Vring / x35 uncore
x49 = 1.900 Vrin / 1.40 Vcore / 1.055 Vring / x35 uncore
x50 = (Haven't done any long term testing of 5.0 so not sure what it takes to get it stable.)

I can bump uncore to x39 and it helps a little with benchmarks, >39 and it starts going backwards. I just leave it on Auto now and the latest BIOS keeps it on x35.
All C states Auto except C6/C7 which are set "Enabled" for that nice low idle vcore.

Nice. Any trouble with 4 dims of ram at those speeds along the way?
post #7990 of 19536
Quote:
Originally Posted by KennethO View Post

Nice. Any trouble with 4 dims of ram at those speeds along the way?
Well...not really. The Profile1 setting sets command rate 2 instead of 1.....but testing with AIDA64 shows no difference anyway.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]