Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 841

post #8401 of 19539
Quote:
Originally Posted by Polarityy View Post

So it passed 15 rounds having failed one pass (not responding), I gave it a bit more and its sitting now at 1.364 and I think its stable, temps are virtually the same. The driver issue I never had before and I do have a GTX780 in this system, I'll give PCIE 2.0 thing a go see what happens. I got a question tho, when I'm 100% sure I'm stable how can get adaptive on? I tried it but it just BSOD dunno really what setting to put on the offset, any help would be greatly appreciated.

Great to see some progress with your oc ,, 15 rounds is decent and try it some more times just to be sure it can pass it several times. 30-40 rounds would be great but most ppl seem to settle with 20 or so. Gaming with BF3 or BF4 are also good indicators aswell as Far Cry 3 i believe. I have no idea why you have the driver issue tho. Dealing with adaptive voltage seems to be tricky. I have gigabyte and i just use manual voltage and it drops auto to low idle status.
post #8402 of 19539
Quote:
Originally Posted by Its L0G4N View Post

I'll give it a try.

Update: I got 4.6 stable now. Going to head for 4.7 before the end of the night.

Update2: tried 4.7 at 1.42v no luck. Either I need to mess with more settings or I need more voltage.
post #8403 of 19539
Quote:
Originally Posted by Polarityy View Post

So it passed 15 rounds having failed one pass (not responding), I gave it a bit more and its sitting now at 1.364 and I think its stable, temps are virtually the same. The driver issue I never had before and I do have a GTX780 in this system, I'll give PCIE 2.0 thing a go see what happens. I got a question tho, when I'm 100% sure I'm stable how can get adaptive on? I tried it but it just BSOD dunno really what setting to put on the offset, any help would be greatly appreciated.
I don't use the offset in Adaptive mode just the Turbo, I input 1.22 for adaptive uncore volage and in the Turbo mode for the multiplier voltage I type 1.35 Enter, then below that it will show your Total adaptive voltage which is the offset (which is zero) + the turbo mode voltage (which is the max voltage you want the max multiplier running at which moves about randomly).
post #8404 of 19539
This is what i got from my dud.

4.3Ghz stable@1.195V
Uncore 34x@stock
Everyting @ stock
Stable for a week except BF4 which gave me BSOD's so upped my Vcore(bios) by .002V just for BF4 and all BSOD's went away.

Then slogged two straight days with broken finger to hit 4.5Ghz with following and somehow it seems stable ( might be not ) before i hit BF4 again. biggrin.gif

4.5Ghz
Vcore ( BIOS ) - 1.310V
Uncore - 37x/ 1.10V
Vrin - 1.8V
LLC - Extreme
Others - Stock/Auto
Going to play BF4 and hope no more BSOD's biggrin.gif

One thing i observed is when you keep Uncore-34/35x@ stock, it automatically bump ups to 40x when you are into Windows and worst part was that everytime i put 34/35x in BIOS and hit x264 / IBT stress testing i was getting BSOD's from first Vcore setting to final.Then out curiosity tried to do stress test on XTU ( third tester in my OC stress buster ) and to my surprise i saw Uncore -40x@ 0.80V rolleyes.gifrolleyes.gif

Pictures coming on next post. smile.gif
Blue X7
(12 items)
 
Blue X5
(15 items)
 
 
CPUMotherboardGraphicsHard Drive
5820K  Asus Rampage V Extreme Rx 480 8 GB Samsung 256 Evo 
CoolingOSMonitorKeyboard
Corsair H110i MS Win10 64 Pro Dell ST2220L Logitech G110 
PowerMouseMouse PadAudio
Corsair 1200AXi Razer DA Chorma Razer Goliatus Control Asus DGX 
CPUMotherboardGraphicsRAM
i7 4770k Asus Z97 Maximus Ranger  GTX 760 Gskill 2133 2x4 GB 2133Mhz 
Hard DriveHard DriveCoolingOS
Samsung 120 Evo WD 2TB Green Corsair H100i GTX Win 8.110 Pro 
MonitorKeyboardPowerCase
Dell ST2220L Logitech G105 Seasonic S12 II 620W Corsair 300R 
MouseMouse PadAudio
Razer Death Adder 2013 Razer Goliatus Control Asus DG 
  hide details  
Reply
Blue X7
(12 items)
 
Blue X5
(15 items)
 
 
CPUMotherboardGraphicsHard Drive
5820K  Asus Rampage V Extreme Rx 480 8 GB Samsung 256 Evo 
CoolingOSMonitorKeyboard
Corsair H110i MS Win10 64 Pro Dell ST2220L Logitech G110 
PowerMouseMouse PadAudio
Corsair 1200AXi Razer DA Chorma Razer Goliatus Control Asus DGX 
CPUMotherboardGraphicsRAM
i7 4770k Asus Z97 Maximus Ranger  GTX 760 Gskill 2133 2x4 GB 2133Mhz 
Hard DriveHard DriveCoolingOS
Samsung 120 Evo WD 2TB Green Corsair H100i GTX Win 8.110 Pro 
MonitorKeyboardPowerCase
Dell ST2220L Logitech G105 Seasonic S12 II 620W Corsair 300R 
MouseMouse PadAudio
Razer Death Adder 2013 Razer Goliatus Control Asus DG 
  hide details  
Reply
post #8405 of 19539
Ummmm... 4.3 @ 1.20v and 4.5 @ 1.31v is not at all a "dud" haha..
post #8406 of 19539
Quote:
Originally Posted by fleetfeather View Post

Ummmm... 4.3 @ 1.20v and 4.5 @ 1.31v is not at all a "dud" haha..

I'm getting 4.4 @ 1.32v with a 34x uncore, and 2.0v vrin frown.gif
post #8407 of 19539
Thread Starter 
Quote:
Originally Posted by Mysticode View Post

Gentlemen!!!

MULTIPLIER: 44x
LLC: 8
VRIN: 2.0v
VCORE: 1.32v (1.344v at load)
VCIN/CACHE: 34x

Running MinerD CPU Crypto Mining for 8+ hours now! Previously, before setting VRIN to 2.0v (had it at 1.7v or so if you recall), and not touching the VCIN/CACHE, I had max 1 hour of stability running this.

Any suggestions of what I should do next? Maybe keep the 2.0 VRIN but put VCIN/CACHE back to Auto? I kind of made both of those changes at the same time...

So you got stable for one multiplier higher?

 

Quote:
Originally Posted by Frenky91 View Post

Hi i managed to overclok my cpu to 4.6ghz finaly and it is stable... i was at 4.2ghz but wonted 4.5ghz because my i5 2500k was on it... so i will share pictures so it may will help you... btw i will lower cpu voltage because for 4.2ghz i only need 1.150v

specs: i5 4670k

msi z87gd65 gaming

corsair 4x2gb=8gb

Pictures:
*
*
*

If you could fill out the form on the first page, that'd be great.

 

Quote:
Originally Posted by soulbytes View Post

wondering.... is anyone here on daily with vcore above 1.35v ? and for how long already... thanks

 

Chart shows you. I've had it running on 1.42 as daily OC for 2 months. Days I game, nights I hammer it with chess.

Quote:
Originally Posted by Jedson3614 View Post

I never said it wouldn't work lol, I'm just saying with that type of vcore you must at least have a custom loop, that isn't going to fly with everyday users or overclockers, and with that type of vcore top recommend short of a custom loop is insane. I never stated it wouldn't work, and I personally have not, but have read posts about haswell chips dying above 1.35. Ill try and find the links. Also take into consideration the level of varience of haswell chips. As a standard norm 1.45v is not a good idea.

You've read chips dying above 1.35? Link me please, I don't believe it. THe only incidents I've heard are from some guy who delidded and probably broke it via delid and THEN ran Prime, most likely on adaptive voltage. FTW is on 1.5v and no problems so far. I'm on 1.42v under heavy use. Temps differ from person to person and the benchmark a lot.

 

Quote:
Originally Posted by Johny Boy View Post

This is what i got from my dud.

4.3Ghz stable@1.195V
Uncore 34x@stock
Everyting @ stock
Stable for a week except BF4 which gave me BSOD's so upped my Vcore(bios) by .002V just for BF4 and all BSOD's went away.

Then slogged two straight days with broken finger to hit 4.5Ghz with following and somehow it seems stable ( might be not ) before i hit BF4 again. biggrin.gif

4.5Ghz
Vcore ( BIOS ) - 1.310V
Uncore - 37x/ 1.10V
Vrin - 1.8V
LLC - Extreme
Others - Stock/Auto
Going to play BF4 and hope no more BSOD's biggrin.gif

One thing i observed is when you keep Uncore-34/35x@ stock, it automatically bump ups to 40x when you are into Windows and worst part was that everytime i put 34/35x in BIOS and hit x264 / IBT stress testing i was getting BSOD's from first Vcore setting to final.Then out curiosity tried to do stress test on XTU ( third tester in my OC stress buster ) and to my surprise i saw Uncore -40x@ 0.80V rolleyes.gifrolleyes.gif

Pictures coming on next post. smile.gif

Okie. So that's two different CPUs? Nvm, looks like one CPU?


Edited by Darkwizzie - 1/16/14 at 5:07pm
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #8408 of 19539
Dark, I've had it at 44x for awhile now.

The only way I got stable for 12+ (on going) hours now is by going up to 2.0 vrin, and setting up the 34x uncore like you suggested. Was just wondering for the sake of testing if you think I should ditch the uncore and go back to Auto or not?
post #8409 of 19539
Thread Starter 

Oh right, so x44 was where you couldn't stabilize but now it's stable, right. For the sake of testing stick with 34 uncore. Only touch uncore after you've decided this is as high as your core will go. Once you've hit that point, then you can overclock that uncore but NEVER decrease the core multiplier to get that extra uncore multiplier(s). Chances are your uncore will not be as high as your core, but we want it that way. If you manage to get 44/44, more power to you.

 

So you'd rather have 44/34 than 43/43. Uncore is secondary. 

You can raise uncore voltage to try to get a higher uncore overclock, that is acceptable. Just try not to hit over 1.3v, that's quite a lot for uncore. Uncore voltage also slightly affects temps.


Edited by Darkwizzie - 1/16/14 at 4:58pm
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #8410 of 19539
Quote:
Originally Posted by Mysticode View Post

I'm getting 4.4 @ 1.32v with a 34x uncore, and 2.0v vrin frown.gif

that's worse than average, but there's still been worse thumb.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]