Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 855

post #8541 of 19539
Thread Starter 
Quote:
Originally Posted by Its L0G4N View Post

I'm at 4.6GHz stable at 1.375v uncore 43 1.185v ram 1866. What other settings do I need to change in the bios to get to 47 at lets say 1.4v?

So you are trying 4.7 @ 1.4v and 2v input voltage?
Uncore to stock when OCing. Might need higher Vcore. You're completely stable at 4.6 and you bsod within 5 seconds on x264 once you go 4.7? Strange.

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #8542 of 19539
Quote:
Originally Posted by Darkwizzie View Post

So you are trying 4.7 @ 1.4v and 2v input voltage?

Uncore to stock when OCing. Might need higher Vcore. You're completely stable at 4.6 and you bsod within 5 seconds on x264 once you go 4.7? Strange.

It only BSOD when x264 hit the 100% load. the first minute when it was under 40% load was fine.
post #8543 of 19539
Thread Starter 
Quote:
Originally Posted by Its L0G4N View Post


It only BSOD when x264 hit the 100% load. the first minute when it was under 40% load was fine.

The first pass doesn't count, that's not the part that stresses.

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #8544 of 19539
I want to add to the knowledge pool!

If you remember, at 4.6GHz, I would cold boot with CPU Analog I/O Voltage Offset set to 0.25v and would crash when stress testing with x264 with anything below 0.25v. So it was quite a dilemma.

After asking Cyro999 for advice in my latest build thread (in sig), I started thinking about one thing that came up in this Haswell thread of late. The true nature of the LLC Level and its relation to the Haswell chip. Apparently, unlike in the past the LLC Level is not about controlling the VCore vdroop but about controlling the vdroop with the vrin (Eventual CPU Input Voltage) and those SA and I/O offsets.

I booted into my Bios and changed the CPU Analog I/O Voltage Offset from 0.25v to 0.23v and the LLC Level from Auto to Level 2 (second highest setting) and ran x264 with excellent results - no crashing!

I would call this nothing short of a breakthrough!!! It's always nice to solve a nagging mystery.

Oh, there was also no change in temps!

This definitely opens up the door for me to see what other volts I can now reduce and still maintain a stable 4.6GHz?!
 
BitoHeaven
(16 items)
 
Cigar ATX PC
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel i7 4770k @ 4.5GHz Asus Maximus VI Gene Gigabyte R9 290 @ 1160MHz/1350MHz Gigabyte R9 290 @ 1160MHz/1350MHz 
RAMHard DriveHard DriveOptical Drive
G.Skill Trident X 2X8GB DDR3 2400MHz Samsung 840 PRO 256GB  Seagate Barracuda 7200.14 3TB SATA III 6Gb/s 64... Pioneer Blu-ray Burner 
CoolingOSMonitorKeyboard
Liquid Single Loop Triple Radiators Win 7 SP1 Professional x64bit  Samsung SynchMaster 24" Widescreen 1200p TFT-LC... Logitech G15 
PowerCaseMouseMouse Pad
EVGA SuperNOVA G2 1300w 80+ Gold Fully Modular  Fractal Design Arc Midi R2 Microsoft Sidewinder X5 Allsop Redmond Mouse Pad 
Audio
Cambridge Soundworks 5.1 
CPUMotherboardGraphicsRAM
Intel Core i5-3570K @ 4.6GHz ASRock Z77E-ITX mITX  Sapphire HD 7990 @ 1090MHz/1600MHz G.SKILL Ripjaws 2X4GB DDR3-1600 @ 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Crucial SSD 128GB mSATA SATA III 6GB  Seagate Barracuda 7200.12 1TB SATA II 32MB 7200RPM LG DVD R/W SATA with LightScribe Corsair Cooling Hydro Series H100 
OSMonitorKeyboardPower
Win 7 Professional x64bit Samsung 52" 1080p 60Hz LCD Logitech Wireless K330 Corsair AX850 Gold Fully Modular 
CaseMouseMouse PadAudio
BitFenix Prodigy Mini-ATX Black  Logitech Wireless M215 Corsair Vengeance MM200 Yamaha RX-V681 & PSB/Polk Audio 5.1 
CPUMotherboardGraphicsRAM
AMD Athlon II X4 640 ASRock N68C-GS NVIDIA 6600GT G. Skill Ripjaws DDR3 1600MHz 
Hard DriveOptical DriveCoolingOS
WD Caviar Blue 500GB 16MB Cache 7200RPM LG Optical Drive Thermaltake Max Orb Windows 7 
MonitorKeyboardPowerCase
Viewsonic 19” Flatscreen CRT Gigabyte GK-K6800 103  Thermaltake TR2 600W Cigar Boxes 
MouseMouse Pad
Zalman ZM-M300 Corsair Vengeance MM200 
  hide details  
Reply
 
BitoHeaven
(16 items)
 
Cigar ATX PC
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel i7 4770k @ 4.5GHz Asus Maximus VI Gene Gigabyte R9 290 @ 1160MHz/1350MHz Gigabyte R9 290 @ 1160MHz/1350MHz 
RAMHard DriveHard DriveOptical Drive
G.Skill Trident X 2X8GB DDR3 2400MHz Samsung 840 PRO 256GB  Seagate Barracuda 7200.14 3TB SATA III 6Gb/s 64... Pioneer Blu-ray Burner 
CoolingOSMonitorKeyboard
Liquid Single Loop Triple Radiators Win 7 SP1 Professional x64bit  Samsung SynchMaster 24" Widescreen 1200p TFT-LC... Logitech G15 
PowerCaseMouseMouse Pad
EVGA SuperNOVA G2 1300w 80+ Gold Fully Modular  Fractal Design Arc Midi R2 Microsoft Sidewinder X5 Allsop Redmond Mouse Pad 
Audio
Cambridge Soundworks 5.1 
CPUMotherboardGraphicsRAM
Intel Core i5-3570K @ 4.6GHz ASRock Z77E-ITX mITX  Sapphire HD 7990 @ 1090MHz/1600MHz G.SKILL Ripjaws 2X4GB DDR3-1600 @ 1866MHz 
Hard DriveHard DriveOptical DriveCooling
Crucial SSD 128GB mSATA SATA III 6GB  Seagate Barracuda 7200.12 1TB SATA II 32MB 7200RPM LG DVD R/W SATA with LightScribe Corsair Cooling Hydro Series H100 
OSMonitorKeyboardPower
Win 7 Professional x64bit Samsung 52" 1080p 60Hz LCD Logitech Wireless K330 Corsair AX850 Gold Fully Modular 
CaseMouseMouse PadAudio
BitFenix Prodigy Mini-ATX Black  Logitech Wireless M215 Corsair Vengeance MM200 Yamaha RX-V681 & PSB/Polk Audio 5.1 
CPUMotherboardGraphicsRAM
AMD Athlon II X4 640 ASRock N68C-GS NVIDIA 6600GT G. Skill Ripjaws DDR3 1600MHz 
Hard DriveOptical DriveCoolingOS
WD Caviar Blue 500GB 16MB Cache 7200RPM LG Optical Drive Thermaltake Max Orb Windows 7 
MonitorKeyboardPowerCase
Viewsonic 19” Flatscreen CRT Gigabyte GK-K6800 103  Thermaltake TR2 600W Cigar Boxes 
MouseMouse Pad
Zalman ZM-M300 Corsair Vengeance MM200 
  hide details  
Reply
post #8545 of 19539
Ok,with the BLCK at 111 still, I lowered the uncore to 30, effectively making it 3330 due to the BLCK OC also raised the voltage to 1.42, cross fingers...

Also 42 41 41 41 are my core ratios...effectively 4660 with the BLCK OC at 111

I had defaulted ALL of my Graphic card 780, but still got the freezes after and hour or so playing frown.gif so now I'm back to OCing IT too --- I've got the K-Boost On, as well as the overvoltage at +38. Then I've got 116 as the CPU offest and 219 as the mem clock offset...Also, I was getting Blue screens now, but not NOW obviously cause I'm typing this right here right now...
Edited by D-Dow - 1/17/14 at 9:27pm
post #8546 of 19539
Quote:
Originally Posted by Gunderman456 View Post

I want to add to the knowledge pool

If you remember, at 4.6GHz, I would cold boot with CPU Analog I/O Voltage Offset set to 0.25v and would crash when stress testing with x264 with anything below 0.25v. So it was quite a dilemma.

After asking Cyro999 for advice in my latest build thread (in sig), I started thinking about one thing that came up in this Haswell thread of late. The true nature of the LLC Level and its relation to the Haswell chip. Apparently, unlike in the past the LLC Level is not about controlling the VCore vdroop but about controlling the vdroop with the vrin (Eventual CPU Input Voltage) and those SA and I/O offsets.

I booted into my Bios and changed the CPU Analog I/O Voltage Offset from 0.25v to 0.23v and the LLC Level from Auto to Level 2 (second highest setting) and ran x264 with excellent results - no crashing!

I would call this nothing short of a breakthrough!!! It's always nice to solve a nagging mystery.

Oh, there was also no change in temps!

This definitely opens up the door for me to see what other volts I can now reduce and still maintain a stable 4.6GHz?!

May ask, did you over clock your ram at the time? I always though thouse analog I/0 setting is for ram oc. I am hitting the well try to stay at 4.9.. keep bosd with 101. I tested vrin up to 2.3. No luck
post #8547 of 19539
ok guys, FINALLY stable with the 111 BLCK..basically I had to take it off of adaptive and set Manual voltage. The instability was coming from the adaptive or err, turbo, mode. You can't use turbo when BLCK is being used smile.gif Thanks fer all your help. I got what I wanted, could probably even up the uncore and some other things again that I'd toned down because I didn't know what was causing the instability.
post #8548 of 19539
Quote:
Originally Posted by D-Dow View Post

ok guys, FINALLY stable with the 111 BLCK..basically I had to take it off of adaptive and set Manual voltage. The instability was coming from the adaptive or err, turbo, mode. You can't use turbo when BLCK is being used smile.gif Thanks fer all your help. I got what I wanted, could probably even up the uncore and some other things again that I'd toned down because I didn't know what was causing the instability.

BLCK 111 that's pretty good bro.. mine can't even touch 101-102 .. the vga card don't boot up on windows.. everything else is fine. probably the vga don't like the PCIE clock.. so i need to uninstall the driver first to get it on to windows.
Edited by soulbytes - 1/18/14 at 1:12am
post #8549 of 19539
If i was able to make it out alive with 20 pass of x264, should I save my current setup and keep trying to achieve higher, or should I throw another stress test at it?

For fun I'm trying OCCT 4.4 CPU Linpack test, with AVX on. Tom from OC3D uses this to make sure his OC is rock solid. My cores are getting super hot as I presumed they would (95c), but I'm 10 mins in without any errors...
post #8550 of 19539
Quote:
Originally Posted by Mysticode View Post

If i was able to make it out alive with 20 pass of x264, should I save my current setup and keep trying to achieve higher, or should I throw another stress test at it?

For fun I'm trying OCCT 4.4 CPU Linpack test, with AVX on. Tom from OC3D uses this to make sure his OC is rock solid. My cores are getting super hot as I presumed they would (95c), but I'm 10 mins in without any errors...

If you want to run linpack with AVX1, why don't you just run Intelburntest? I don't agree with it at all on haswell.

As for 20 pass thing - save it. Personally, i'd hit 5 or 10 passes then adjust on the fly for every day use. No stress test will get you 10000% solid in every different load (especially with haswell apparently), and if you can pass an hour or two of x264 you're probably close enough so that you can make a slight adjustment or two when problems arise and be fine
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]