Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]
New Posts  All Forums:Forum Nav:

Haswell Overclocking Guide [With Statistics] - Page 857

post #8561 of 19603
Quote:
Originally Posted by Cyro999 View Post

No, the vcore has nothing to do with uncore. If it works it works, if it doesn't, it doesn't. You could try setting 1.31vcore and waiting to see if you get problems with it; though if you wanted to increase the clock speed, then do that now. After you're at max clock speed you want for core, you can increase uncore speed to continue improving the OC

Well ideally I'd want to see how low voltage and stable I could get 4.4ghz at before even thinking about 4.5ghz right? If i bring down my vcore in doing this, what would help maintain the lower voltage setting, vrin in this case? It's where i started getting my current voltage stable.
post #8562 of 19603
Thread Starter 
Quote:
Originally Posted by Mysticode View Post


Well ideally I'd want to see how low voltage and stable I could get 4.4ghz at before even thinking about 4.5ghz right? If i bring down my vcore in doing this, what would help maintain the lower voltage setting, vrin in this case? It's where i started getting my current voltage stable.

If you're going for 4.5 I don't think it matters. If you find stable 4.5, what low setting you find at 4.4 won't matter because it won't work for 4.5. If you fail at 4.5, then you could think about getting lowest Vcore without crashing. But if you succeed in getting 4.5, the time is wasted.

 

So I would try for 4.5, fail then I go back and look at low volting 4.4, succeed, then go on from there at 4.5.

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #8563 of 19603
Quote:
Originally Posted by Mysticode View Post

Well ideally I'd want to see how low voltage and stable I could get 4.4ghz at before even thinking about 4.5ghz right? If i bring down my vcore in doing this, what would help maintain the lower voltage setting, vrin in this case? It's where i started getting my current voltage stable.

You got fails at 1.3v, relating to vcore, and passes at 1.32v. You was not having problems relating to VRIN etc, so almost certainly you can't go below like 1.31 without problems, and 1.32 still has to be tested in all of your programs and games before you can say it's 100% solid in them. There's not much left to do in terms of vcore - you can't add VRIN or Ring and get a lower vcore working, unless you had problems relating to them in the first place (from what i understand) which you didn't now (the vcore you set was the lowest that you could; or very close to it)

with your 4.4 right now, if you wanted 4.5 i'd just go for it immediately. Save the 4.4 in a profile, and attack 4.5
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
post #8564 of 19603
I still have problem with my 4.5 ,, so yesterday i went back to 4.4 to see if it was really stable before or not. I successfully ran x264 "60" runs overnight ,, took about 12 hours so i guess its stable for now smile.gif I reinstalled OS aswell on a new SSD if that could have affected stability somehow and loaded default settings in bios before any changes. I had 50+ BSOD in the log which could have messed about some files. I will try to find my lowest stable 4.4 and work from there again towards 4.5. Should i run something else beside x264 ,, maybe aida again ? and gaming of course.

Settings with 4.4

44x
1.33vcore
Cpu Input 1.95v
Uncore 1.15v @ 33x
DDR1333 stock 9-9-9-24 1.5v
LLC extreme
post #8565 of 19603
Thread Starter 
Quote:
Originally Posted by Rob78 View Post

I still have problem with my 4.5 ,, so yesterday i went back to 4.4 to see if it was really stable before or not. I successfully ran x264 "60" runs overnight ,, took about 12 hours so i guess its stable for now smile.gif I reinstalled OS aswell on a new SSD if that could have affected stability somehow and loaded default settings in bios before any changes. I had 50+ BSOD in the log which could have messed about some files. I will try to find my lowest stable 4.4 and work from there again towards 4.5. Should i run something else beside x264 ,, maybe aida again ? and gaming of course.

Settings with 4.4

44x
1.33vcore
Cpu Input 1.95v
Uncore 1.15v @ 33x
DDR1333 stock 9-9-9-24 1.5v
LLC extreme

NOt sure I understand what you're saying here.

 

So you are currently stable at 4.4 and you want to know whether to test further for 4.4 after passing 70 pass of x264 or to head to x4.5? x60 pass is overkill man.

Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
Undelwalt (2017)
(29 items)
 
 
Celapaleis (2013)
(16 items)
 
CPUMotherboardGraphicsRAM
7600k @ 5.197/1.392 1.392v z170 Asus Hero EVGA 1080ti SC Black (2100/6250) x2 8gb GSkill Trident Z 3600 @ 3804 15-15-15-32-2T 
Hard DriveHard DriveHard DriveCooling
Samsung 950 Pro 512gb (Undelwalt) WD Red 2tb (Pack Yak II) Seagate Expansion Drive 5tb (Phoenix Down II) 3x560mm HardwareLabs Nemesis GTX 
CoolingCoolingCoolingCooling
XPSC Raystorm Pro Watercool Heatkiller 1080ti Full Cover Waterblock EK XTOP Revo Dual D5 (Serial, PWM, v4) EK ZMT (1/2 - 3/4 ID OD) 
CoolingCoolingCoolingCooling
14xEK ACF (Compression Fittings) EK x4 250 (v2) Distilled Water + PT Nuke (Copper Sulphate) 24x140mm Silent Wings 3 
OSMonitorKeyboardPower
Windows 10 Pro 64bit Catleap 27 Inch 2560x1440 IPS 60hz Display Coolermaster Storm Trigger (Brown Switches) EVGA P2 1000w 
CaseMouseMouse PadAudio
Corsair Air 540 Logitech G Pro Tek Syndicate "Raze the World" Desk Mat O2 + Odac by Mayflower Electronics (Rev A) 
AudioAudioAudioAudio
Sennheiser HD 800 2xKrk Rokit 6 G2 Blue Yeti (Grey) Rode PSA-1 Arm 
Other
Aquaero 6 LT + Aluminum Heatsink 
CPUMotherboardGraphicsRAM
i5 6600k Delid @ 4.848/4.848 Asus z170 Hero MSI GTX 980ti @ 1499/4082 1.25v/134% Power 2 x 8gb Gskills Ripjaws V 3131 16-16-16-32 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro Series 840 256gb (Celapaleis) 1 TB Samsung Drive (Pack Yak) Samsung Pro Series 850 256gb (Celapaleis Reprise) Phoenix Down (External Backup) 
CoolingCoolingOSMonitor
Noctua D14 Kraken x61 Push-Pull for GPU Windows 10 Pro Catleap 2560x1440 @ 60hz 
KeyboardPowerCaseMouse
CM Storm Trigger Brown Switches EVGA Supernova 1000w P2 Corsair 540 Air Razer Abyssus 
Mouse PadAudioAudioAudio
Steelseries QcK Mini Blue Yeti Microphone Objective Dac + Amp Sescom AB Switch 
AudioAudioAudioAudio
Krk Rokit 6 G2 x2 Radioshack Ground Loop Isolator (For Rokits) Wooaudio Aluminum Headphone Stand Sennheiser HD 800 
AudioOther
Logitech c920 Webcam NZXT Sentry Mix 2 Fan Controller 
  hide details  
Reply
post #8566 of 19603
Quote:
Originally Posted by Darkwizzie View Post

NOt sure I understand what you're saying here.

So you are currently stable at 4.4 and you want to know whether to test further for 4.4 after passing 70 pass of x264 or to head to x4.5? x60 pass is overkill man.

Yeah i know but i was at 45x 1.37-38v which i thought was stable at first ,, i mean i passed several times 15 passes x264 9 hours aida64 and 20 hours BF3. But then i got a few BSOD close to each other , even at just the score table in BF3. So i had to back down to 44x to see if i could pass that again. But im wondering if x264 would be enough as a stress test ? and gaming. I will try some more again at 45x .
post #8567 of 19603
Quote:
But then i got a few BSOD close to each other , even at just the score table in BF3. So i had to back down to 44x to see if i could pass that again. But im wondering if x264 would be enough as a stress test ? and gaming

That's when you make slight adjustments, depending on the settings and BSOD. With uncore and RAM down, it should be easy to fix
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
Insert Name Here
(14 items)
 
  
CPUMotherboardGraphicsRAM
6700k Asus Maximus VIII Hero Gigabyte Aorus Xtreme 1080ti Corsair LPX 2x8GB 3200c16 
Hard DriveHard DriveCoolingOS
Old Seagate HDD Samsung 850 EVO Thermalright Silver Arrow SB-E SE Windows 7 Home Premium 64 bit 
MonitorKeyboardPowerCase
Asus PG258Q (240hz + Gsync) WASDKeyboards.com v1 semi custom w/ mx browns, ... Superflower Golden Green HX550 Air540 
MouseMouse Pad
Logitech G Pro Qck+ 
  hide details  
Reply
post #8568 of 19603
Quote:
Originally Posted by Rob78 View Post

Yeah i know but i was at 45x 1.37-38v which i thought was stable at first ,, i mean i passed several times 15 passes x264 9 hours aida64 and 20 hours BF3. But then i got a few BSOD close to each other , even at just the score table in BF3. So i had to back down to 44x to see if i could pass that again. But im wondering if x264 would be enough as a stress test ? and gaming. I will try some more again at 45x .

I feel like a broken record here: What is the BSOD code you got? The fact that you got a BSOD only indicates that your OC is unstable. Without the error code, it's pretty difficult for us to figure out what needs to be adjusted. If you didn't catch the code when it happened, you can use BlueScreenViewer to get the error code. thumb.gif
post #8569 of 19603
hehe well i got both some 101 and 124 at that time. I tried to raise vcore and input more but still got BSOD. Thats a major problem with haswell to pin down why its actually crash at some point when you have been pretty stable for 2-3 weeks like i was. However passing 60 rounds with 44x was great so now i can more carefully try 45x again in small steps and perhaps my fresh OS install might help. Btw im wondering if x264_Benchmark_HD_v5.0.1 are using AVX ?
post #8570 of 19603
Quote:
Originally Posted by Rob78 View Post

hehe well i got both some 101 and 124 at that time. I tried to raise vcore and input more but still got BSOD. Thats a major problem with haswell to pin down why its actually crash at some point when you have been pretty stable for 2-3 weeks like i was. However passing 60 rounds with 44x was great so now i can more carefully try 45x again in small steps and perhaps my fresh OS install might help. Btw im wondering if x264_Benchmark_HD_v5.0.1 are using AVX ?

Did you raise the vcore and vrin at the same time?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Haswell Overclocking Guide [With Statistics]