As i said, LLC cannot be enabled, the MB sets it to disabled automatically. If i enable LLC and hit F10 (save and reset), it will be on disabled after restart.., if i set it to enable and then i select the CPU multiplier or Vcore and hit enter without even changing the value, it changes the LLC to disabled again without even restarting (F10). So, according to the Asrock rep, to get level 1 i need to set it to "Enabled"
But you are probably right about setting the Cache Voltage manually, and you are definitely right about the input voltage.. as it is obvious from my post, it made no difference from 1.95 to 2.0V
I will get to it in the morning then come back here with the results.
Edited by angelotti - 2/12/14 at 10:11am