Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club
New Posts  All Forums:Forum Nav:

[Official] EVGA Classified & K|NGP|N Owner's Club - Page 1054

post #10531 of 21377
Quote:
Originally Posted by tainle View Post

thanks for the rep...i am using the stock cooler...but with the idle clock enabled that mean the voltage goes lower in idle mode right?

Yes the voltage drops when idle. I just confirmed with my multimeter. However that is really high to be running on air!
post #10532 of 21377
Quote:
Originally Posted by tainle View Post

thanks for the rep...i am using the stock cooler...but with the idle clock enabled that mean the voltage goes lower in idle mode right?

Yea that's right, the voltage and clocks drop down at idle.

Even if you set voltage with the Classified Voltage Tuner tool it will still downclock the voltage at idle (at least on my card).

I am using the latest tool v2.0.4.3.
My System
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770K @ 4.5GHz ASUS Maximus VI Hero Z87 Gigabyte GTX 980 Ti G1 Gaming 16GB (2 x 8GB) G.Skill Trident X DDR3-2400 
Hard DriveHard DriveHard DriveHard Drive
750GB Samsung 840EVO 256GB Crucial M4 150GB Velociraptor 1TB Samsung F1 
Optical DriveCoolingOSMonitor
Asus DRW-24B1ST Phanteks PH-TC14PE Win 10 64-bit 27" Qnix QX2710 96Hz 
KeyboardPowerCaseMouse
Cooler Master QuickFire Ultimate Cooler Master V1000 1000W 80+ Gold Fractal Design Arc Midi R2 Logitech G500s 
Mouse PadAudioOtherOther
Func Surface 1030 Asus Xonar Essence STX M-Audia AV 40 Polk PSW10 Sub 
  hide details  
Reply
My System
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4770K @ 4.5GHz ASUS Maximus VI Hero Z87 Gigabyte GTX 980 Ti G1 Gaming 16GB (2 x 8GB) G.Skill Trident X DDR3-2400 
Hard DriveHard DriveHard DriveHard Drive
750GB Samsung 840EVO 256GB Crucial M4 150GB Velociraptor 1TB Samsung F1 
Optical DriveCoolingOSMonitor
Asus DRW-24B1ST Phanteks PH-TC14PE Win 10 64-bit 27" Qnix QX2710 96Hz 
KeyboardPowerCaseMouse
Cooler Master QuickFire Ultimate Cooler Master V1000 1000W 80+ Gold Fractal Design Arc Midi R2 Logitech G500s 
Mouse PadAudioOtherOther
Func Surface 1030 Asus Xonar Essence STX M-Audia AV 40 Polk PSW10 Sub 
  hide details  
Reply
post #10533 of 21377
does classified controller keep the voltage setting after a reboot?
post #10534 of 21377
Quote:
Originally Posted by tainle View Post

does classified controller keep the voltage setting after a reboot?

Yes, shutdown clears the settings.
    
CPUMotherboardGraphicsRAM
Xeon E5-1680 V2  R4BE  TITAN X (Pascal)   2666 Dominator Platinum CL10 
Hard DriveCoolingCoolingOS
750 NVMe 1.2TB EK HF/rx360/rx120 EK FC/GTs/mcp655 Windows 10 Pro  
MonitorPowerCaseAudio
BL3200PT 1600 T2 800d Pro Audio 2.1 + DragonFly Red 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Xeon E5-1680 V2  R4BE  TITAN X (Pascal)   2666 Dominator Platinum CL10 
Hard DriveCoolingCoolingOS
750 NVMe 1.2TB EK HF/rx360/rx120 EK FC/GTs/mcp655 Windows 10 Pro  
MonitorPowerCaseAudio
BL3200PT 1600 T2 800d Pro Audio 2.1 + DragonFly Red 
  hide details  
Reply
post #10535 of 21377
Quote:
Originally Posted by MrTOOSHORT View Post

Yes, shutdown clears the settings.

is there a reason for this? so we have to set it everything after a restart?
post #10536 of 21377
Quote:
Originally Posted by tainle View Post

is there a reason for this? so we have to set it everything after a restart?

Why would you want over volts staying constant all the time and wearing down your card?

I would think the reason is safety of the original programmer not burning up people's cards, that don't think to turn it off after resetting.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #10537 of 21377
Quote:
Originally Posted by tainle View Post

is there a reason for this? so we have to set it everything after a restart?

Reason, so I've heard, is that when you start up the computer later on, you might have forgotten you had set very high voltages previously. So this way you're protected.
    
CPUMotherboardGraphicsRAM
Xeon E5-1680 V2  R4BE  TITAN X (Pascal)   2666 Dominator Platinum CL10 
Hard DriveCoolingCoolingOS
750 NVMe 1.2TB EK HF/rx360/rx120 EK FC/GTs/mcp655 Windows 10 Pro  
MonitorPowerCaseAudio
BL3200PT 1600 T2 800d Pro Audio 2.1 + DragonFly Red 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Xeon E5-1680 V2  R4BE  TITAN X (Pascal)   2666 Dominator Platinum CL10 
Hard DriveCoolingCoolingOS
750 NVMe 1.2TB EK HF/rx360/rx120 EK FC/GTs/mcp655 Windows 10 Pro  
MonitorPowerCaseAudio
BL3200PT 1600 T2 800d Pro Audio 2.1 + DragonFly Red 
  hide details  
Reply
post #10538 of 21377
Quote:
Originally Posted by gatesmarch View Post

Yes as another member said, it won't appear on Precision but it is working. I've tested it myself with a multimeter and it works. The accuracy of the Classy Controller for me is 99.9%. One sure fire way to know if it's working is to simply check your temps under load at stock voltage and then turn up the Classy voltage...there will be a difference for sure.

Read the second half of my comment.
post #10539 of 21377
Quote:
Originally Posted by sub50hz View Post

Read the second half of my comment.

Px isn't reflecting what you are setting it at... He said exactly what you said... But he said he measured with a multimeter... Meaning, the multimeter is measuring the proper temp, and PX isn't showing a change? Precision x always shows 1.172 for me, GPU-Z shows 1.375 and a DMM shows 1.4 for me... I set it at 1.375 or in that range. I don't trust any software to tell when it is actually running at.
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
TH10A
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960x Rampage V Extreme 2x EVGA 980Ti Classified 32gb GSkill Ripjaws 4 2400mhz 
Hard DriveHard DriveHard DriveHard Drive
2x Samsung 840 EVO Seagate 3 TB 7200 rpm Seagate 2tb 7200rpm Intel 430 256gb 
CoolingCoolingOSKeyboard
Custom Loop - EK Fittings Too many Radiators Win 10 Das Keyboard Pro S 
PowerCaseMouseMouse Pad
2x EVGA 1300w G2 CaseLabs TH10A Corsair G65 RGB Corsair Large scale pads 
  hide details  
Reply
post #10540 of 21377
Notice I've clearly explained that I do not see a temp increase, meaning that it's either:

A. Not working correctly

or

B. There's a driver issue

You don't get something (higher voltage) for nothing (temp delta), so something is amiss.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club