Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club
New Posts  All Forums:Forum Nav:

[Official] EVGA Classified & K|NGP|N Owner's Club - Page 1123

post #11221 of 21379
Quote:
Originally Posted by draemn View Post

I wouldn't do over 1.27v with air UNLESS you are using a multimeter to verify, on air I'd max around 1.32-1.34v (real voltage, not software setting) if your temps are not going sky high (i.e. over 85 deg).

Haven't flashed my card, so will have to defer to someone else.

Didn't go over 79C at 100% fans. The cooler on this thing is incredible!!!
post #11222 of 21379
Quote:
Originally Posted by trawetSluaP View Post

Didn't go over 79C at 100% fans. The cooler on this thing is incredible!!!
Yes, it is very incredible, although it does make for one freakishly huge card biggrin.gif
post #11223 of 21379
Seems this is the limit for my card. If i add +10 more driver stop responding and if i add more voltage same happens.

post #11224 of 21379
Quote:
Originally Posted by reb00tas View Post

Seems this is the limit for my card. If i add +10 more driver stop responding and if i add more voltage same happens.


Try running the extreme HD preset. Either way, that's a decent clock wink.gif
post #11225 of 21379
Is the Skyn3t rev2 bios. based on the Xti bios ?

Could I get more out of my card with the Xti ?
post #11226 of 21379
Thread Starter 
Quote:
Originally Posted by reb00tas View Post

Is the Skyn3t rev2 bios. based on the Xti bios ?

Could I get more out of my card with the Xti ?

skyn3t rev.2 bios includes the evga official fix and will be pretty much the same as xti. You will not see an improvement in performance. stick with skyn3t rev.2
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
post #11227 of 21379
Thread Starter 
Quote:
Originally Posted by reb00tas View Post

Seems this is the limit for my card. If i add +10 more driver stop responding and if i add more voltage same happens.


you could probably get more out of your memory clock by raising fbvdd slider. you are at stock right now. If you are on air i wouldn't use any higher voltage and you are already pretty high with pwm at max, load voltage is probably somewhere around 1.45v. if you are on water you could go up to 1.5v for quick bench runs.
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
post #11228 of 21379


Valley benchmark provided a 20.5% increase vs default!!!!!!!!!
I can't 100% recall, but I think ACTUAL voltage reading was 1.345v
post #11229 of 21379
Quote:
Originally Posted by draemn View Post

Get that GPU to break 1400 Mhz at a minimum wink.gif My memory can do +700mhz (that's over 7100mhz effective)! If I had even better cooling, I'd be pushing my GPU to 1430 Mhz, but I don't want to heat up my CPU too much.

Are you running it on stock cooling? That's pretty impressive for sure, maybe my card puts out a lot of heat then, oh wells, the customer GPU loop is on it's way, Thanx again for the backplate. Can't wait to see what this puppy does biggrin.gif
post #11230 of 21379
Whooo finally beat my old highscore.



Page.

GPU: Core: 1365 mhz Mem: 8200 mhz

CPU: 4,9 ghz.

This is the limit of this card on aircooling I am pretty sure.

uck I need more money so I can buy that watercooling setup for my GPU.

also hi. it's been a while.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club