Originally Posted by Marc79
I just installed my 780 ti classified, the card boosts to 1150Mhz out of the box at 1.175v, does that seem accurate? Also when I went to 'voltage' in evga precision tool, max I can increase the voltage is by 75mv, wouldn't that go past 1.212v, or is 1.212v max you can set volts to on stock bios? I'm not sure, I'm new to this stuff. I'm not planning on running insane clocks, if I could get extra 50-100mhz on the core that would be fantastic, this would be on air not custom cooling.
Read the post directly above yours..... Precision and afterburner do not control voltage at all. So, the +75 does +0.
Also, are you on the normal switch or LN2. I find that normal boosts really well without any extra voltage from anywhere. It also scores well on benchmarks. The Ln2 bios seems to boost higher, but at the same voltage and clocks, it scores slightly lower (a couple hundred points, not much lower). If you are on the stock bios, you may be seeing limitations. There is this thread, full of useful info (search this thread in the top right is really useful) and the classified thread on EVGA has some good info as well. Take a little time to read page one here, and you will find a lot of stuff there.Edited by Scarlet-Tech - 4/26/14 at 5:42am