Hiya fellas, and and ladies...Here is my Heaven Valley 1.0 Benchmark with my full system specs. The CPU can go faster "5+ GHZ" but I need a slightly better cooler since I am using a 3.5 year old H-50 with 2 Cougar Vortex 120mm fans in a Push Pull setup. Once I get a H-80i or something better or winter is here this is about as fast as I like to run my CPU since I have a little rule of not breaking 70c ever if I can help it
Ok here is my 3.5 year old 2600k at 4635 MHZ 103x45 @1.368v with a Gigabyte P67-UD4-B3 MB 8GB ddr3 1600 Cas 9 Vengence memory Powered by a Corsair TX850 PSU.
Graphics horsepower comes from 2 slightly overclocked EVGA 4GB gtx 770 classified Cooled cards using EVGA precision with +65 on the cores and +319 on the memory.
Primary card ASIC rating is 92.4% letting it run at 1332mhz on the core and 1912.5 on the memory according to GPUZ with temps topping at 70c
Secondary card ASIC rating is only 77.7% letting it run at 1267.3mhz on the core and 1912.5 on the memory according to GPUZ with temps topping at 59c
I ran the Heaven Benchmark at the Extreme HD setting with 8xAA @1920-1080p Heaven reported my primary core speed at 1371mhz and the secondary card at 1345mhz which I know is wrong. The above GPUZ speeds are correct.
AVERAGE FRAME RATE 96.5 fps
Unigine Valley Benchmark 1.0
Windows 7 (build 7601, Service Pack 1) 64bit
Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz (3501MHz) x4 Actual speed 4635 mhz
NVIDIA GeForce GTX 770 184.108.40.20688 (4095MB) x2
1920x1080 8xAA fullscreen
Powered by UNIGINE Engine
Unigine Corp. © 2005-2013
So what do you all think ? Am I getting the most out of my cards or should I flash my LN2 bios with the best SKYNET Bios ROM file or what
If I should flash them what file do you PRO's rec??
Seriously what Bios ROM file should I use with my ACX coolers....no funds for water on my cards
Thank you all very much ahead of time.