Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club
New Posts  All Forums:Forum Nav:

[Official] EVGA Classified & K|NGP|N Owner's Club - Page 136

post #1351 of 21377
Quote:
Originally Posted by CallsignVega View Post

UPS just dropped off two Hydro Copper 780 Classifieds and an EVBot, you guys think I should open them? They would need to run like 1500 MHz to top my 1.3v Titan's. thinking.gif

Tempting!

Do it. Take pics. Post results....
post #1352 of 21377
Quote:
Originally Posted by CallsignVega View Post

UPS just dropped off two Hydro Copper 780 Classifieds and an EVBot, you guys think I should open them? They would need to run like 1500 MHz to top my 1.3v Titan's. thinking.gif

Tempting!

It is going to be tough to top your Titans, but you know the Classifieds will last longer with all the abuse you are doing! wink.gif
Super P's rig
(20 items)
 
  
CPUMotherboardGraphicsRAM
5960x ASUS X99-A II Asus GTX 1080 Ti Corsair Vengeance DDR4 3000 
Hard DriveHard DriveHard DriveOptical Drive
MyDigitalSSD BPX NVMe Samsung 850 EVO Seagate Momentus XT 500 GB External DVDRW 
CoolingCoolingOSMonitor
EK-XLC Predator 240 Swiftech 240mm Radiator Windows 10 Samsung 40" 4K - UN40KU6290 
KeyboardPowerCaseMouse
G710+ EVGA SuperNOVA 850G2 Fractal Design Define S G700s 
Mouse PadAudioAudioAudio
Vipamz Extended XXXL Asus U7 M-Audio AV40 Sennheiser HD 439 
  hide details  
Reply
Super P's rig
(20 items)
 
  
CPUMotherboardGraphicsRAM
5960x ASUS X99-A II Asus GTX 1080 Ti Corsair Vengeance DDR4 3000 
Hard DriveHard DriveHard DriveOptical Drive
MyDigitalSSD BPX NVMe Samsung 850 EVO Seagate Momentus XT 500 GB External DVDRW 
CoolingCoolingOSMonitor
EK-XLC Predator 240 Swiftech 240mm Radiator Windows 10 Samsung 40" 4K - UN40KU6290 
KeyboardPowerCaseMouse
G710+ EVGA SuperNOVA 850G2 Fractal Design Define S G700s 
Mouse PadAudioAudioAudio
Vipamz Extended XXXL Asus U7 M-Audio AV40 Sennheiser HD 439 
  hide details  
Reply
post #1353 of 21377
Quote:
Originally Posted by criminal View Post

It is going to be tough to top your Titans, but you know the Classifieds will last longer with all the abuse you are doing! wink.gif

Ya, I was thinking about that. Really, the GPU chip itself on the Classified takes a larger beating needing 1.4-1.5v for these super high clocks. It's the Titan's power section that takes a beating while the Classifieds could last forever at those power levels. I don't worry either way really as I always upgrade when something faster comes out.
Zybane
(20 items)
 
  
CPUMotherboardGraphicsRAM
i7 6950X - 4.5 GHz Edition 10 Rampage V Extreme Titan Xp  G.Skill 32GB 3200 MHz CL14 
Hard DriveOSMonitorKeyboard
1TB - Samsung SM961 Windows 10 Pro OLED 4K 55" LG C7P Razer BlackWidow TE Stealth Chroma 
PowerMouseAudioAudio
Corsair AX1500i 1500W Titanium Razer Mamba TE Denon AVR-X7200WA Elac BS 312 
AudioAudioAudioOther
Sennheiser HD-700 Headphones Velodyne MiniVee Subwoofer Buttkicker LFE Razer Orbweaver Stealth Chroma 
  hide details  
Reply
Zybane
(20 items)
 
  
CPUMotherboardGraphicsRAM
i7 6950X - 4.5 GHz Edition 10 Rampage V Extreme Titan Xp  G.Skill 32GB 3200 MHz CL14 
Hard DriveOSMonitorKeyboard
1TB - Samsung SM961 Windows 10 Pro OLED 4K 55" LG C7P Razer BlackWidow TE Stealth Chroma 
PowerMouseAudioAudio
Corsair AX1500i 1500W Titanium Razer Mamba TE Denon AVR-X7200WA Elac BS 312 
AudioAudioAudioOther
Sennheiser HD-700 Headphones Velodyne MiniVee Subwoofer Buttkicker LFE Razer Orbweaver Stealth Chroma 
  hide details  
Reply
post #1354 of 21377
Quote:
Originally Posted by criminal View Post

It is going to be tough to top your Titans, but you know the Classifieds will last longer with all the abuse you are doing! wink.gif
hardware never lasts very long for enthusiasts anyway. So not really that important biggrin.gif
Iron Patriot
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4930K ASUS Rampage IV Gene EVGA GeForce GTX 780 Ti Classified K|NGP|N Edition 16gb Corsair Dominator Platinum 2400mhz (9-11-1... 
Hard DriveCoolingOSMonitor
512gb Samsung Pro SSD Corsair H110 Windows 7 64 bit Samsung 23SA950D 
KeyboardPowerCaseMouse
Corsair Vengeance K70 Corsair AX860 Corsair 350D Mionix Naos 7000 
Mouse PadAudio
Corepad Deskpad XXXXL Beyerdynamic DT 990 Premium 
  hide details  
Reply
Iron Patriot
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-4930K ASUS Rampage IV Gene EVGA GeForce GTX 780 Ti Classified K|NGP|N Edition 16gb Corsair Dominator Platinum 2400mhz (9-11-1... 
Hard DriveCoolingOSMonitor
512gb Samsung Pro SSD Corsair H110 Windows 7 64 bit Samsung 23SA950D 
KeyboardPowerCaseMouse
Corsair Vengeance K70 Corsair AX860 Corsair 350D Mionix Naos 7000 
Mouse PadAudio
Corepad Deskpad XXXXL Beyerdynamic DT 990 Premium 
  hide details  
Reply
post #1355 of 21377
So are there any 780 Classy HC (+ backplate) owners who's samples are not warped/bent in some way? That's pretty much the only thing stopping me from pulling the trigger...
Quote:
Originally Posted by CallsignVega View Post

I don't worry either way really as I always upgrade when something faster comes out.

Where to I sign up to be a Military Instructor Pilot? =(
Edited by Scorpion667 - 8/22/13 at 3:16pm
    
CPUMotherboardGraphicsRAM
3930k 4.7 1.368v RIVE BIOS 2105 680L 1330/7011 16GB Samsung 2133Mhz  
Hard DriveCoolingOSMonitor
Crucial M4 240GB  H110 after 4x H220 RMA Win 8.1 64bit XL2420T Lightboost  
KeyboardPowerCaseMouse
SS 6Gv2  EVGA 1300G2  Arc Midi R2 Zowie AM, many opticals 
Mouse PadAudioAudioAudio
SS QCK+ Xonar Essence STX AK100 MKII Shure SE846  
AudioAudioOther
Ultrasone Pro 900 Sennheiser HD700 Intel EXPI9301CT NIC 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
3930k 4.7 1.368v RIVE BIOS 2105 680L 1330/7011 16GB Samsung 2133Mhz  
Hard DriveCoolingOSMonitor
Crucial M4 240GB  H110 after 4x H220 RMA Win 8.1 64bit XL2420T Lightboost  
KeyboardPowerCaseMouse
SS 6Gv2  EVGA 1300G2  Arc Midi R2 Zowie AM, many opticals 
Mouse PadAudioAudioAudio
SS QCK+ Xonar Essence STX AK100 MKII Shure SE846  
AudioAudioOther
Ultrasone Pro 900 Sennheiser HD700 Intel EXPI9301CT NIC 
  hide details  
Reply
post #1356 of 21377
Thread Starter 
Quote:
Originally Posted by Scorpion667 View Post

So are there any 780 Classy HC (+ backplate) owners who's samples are not warped/bent in some way? That's pretty much the only thing stopping me from pulling the trigger...
Where to I sign up to be a Military Instructor Pilot? =(

Ya the backplate comes with the hydrocopper version and if you look at photos on the right side of the card there are 2 holes which means both screws go thru the backplate. I bought block and backplate separate and you can see on the right side there is only one hole thru the backplate. The other screw on that side goes under the backplate. This is the only way evga could have sold the backplate for both the stock cooler and people who purchase hydrocopper block separately. Because if you notice the stock cooler does not have a screw in the place I am talking about but it needs to be there while using a block. They should have either just made a screw hole there thru the backplate which would be empty with the stock cooler or offered 2 versions of the backplate. I could be totally wrong but hopefully someone with the HC version can confirm if there are 2 holes on the right side. One in each corner of the top of the backplate above the power connector side. It makes a big difference with how snug the backplate sits on the card.
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
post #1357 of 21377
Quote:
Originally Posted by strong island 1 View Post

Ya it happened to both my cards. I think the backplate bending up slightly gives the illusion the whole card is bent. it's really just the top backplate. I am convinced it's because one screw goes under backplate and one over. I was looking at pictures of the hydrocopper cards and they don't have the same problem. It looks like both long screws go thru the backplate on the hydrocopper version. It looks like we bought backplates that were also made to work with the stock cooler. The stock cooler doesn't need a screw in one corner. So if you buy everything separately you will have to put one screw under the backplate and one thru the backplate which obviously causes some issues. Plus there is a little black rubber peice that goes right thru the pcb using the stock cooler. But once you install the waterblock there is now a screw in that hole so the black rubber piece sits on top of the screw and makes the backplate bend up. I might try and remove the black piece of rubber. So people who buy hydrocopper versions wont have this problem and people who buy everything separately will.

Can someone who bought the hydrocopper version let me know if the 2 screws on the right side when looking at the card installed both go thru the backplate?

it looks like there are 2 versions of the backplate. One to work with the stock cooler and waterblock and one that works with just the waterblock. It's only a one hole difference but it makes a big difference. I guess this is a reason to get the HC version. Or we could drill our own hole in the backplate.

But like you said I am not overly concerned. It's a little interesting though. My cards are running amazingly cold. It is a little annoying though because I was really trying to perfect my rig and it bothers me a little bit.

Hopefully EK will either make their block work better with EVGA's backplate or make there own backplate.


Do these help? Tough to get a good angle since I have a small case... I have the HC version. It looks like the screws in question do go through.



post #1358 of 21377
Quote:
Originally Posted by strong island 1 View Post

Ya the backplate comes with the hydrocopper version and if you look at photos on the right side of the card there are 2 holes which means both screws go thru the backplate. I bought block and backplate separate and you can see on the right side there is only one hole thru the backplate. The other screw on that side goes under the backplate. This is the only way evga could have sold the backplate for both the stock cooler and people who purchase hydrocopper block separately. Because if you notice the stock cooler does not have a screw in the place I am talking about but it needs to be there while using a block. They should have either just made a screw hole there thru the backplate which would be empty with the stock cooler or offered 2 versions of the backplate. I could be totally wrong but hopefully someone with the HC version can confirm if there are 2 holes on the right side. One in each corner of the top of the backplate above the power connector side. It makes a big difference with how snug the backplate sits on the card.

I just didn't install that one screw and all is fine mate
post #1359 of 21377
Quote:
Originally Posted by Menthol View Post

I just didn't install that one screw and all is fine mate

Which screw are you talking about ???? Can you post a picture ????

I am going to install my waterblock this weekend ..... And would love some guidance regarding this whole bending issue
X99 Hackintosh
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k @ 4.6 Asus X99 Deluxe Gtx 980's in SLI 32GB Corsair DDR4 @ 3000 
Hard DriveHard DriveCoolingMonitor
SanDisk Extreme PRO 480GB Samsung 830 Pro with OSX Custom Loop  Dell Ultrawide U3415W 
KeyboardPowerCaseMouse
Logitech G710 Evga G1300 Phanteks Enthoo Primo Logitech G502 
  hide details  
Reply
X99 Hackintosh
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k @ 4.6 Asus X99 Deluxe Gtx 980's in SLI 32GB Corsair DDR4 @ 3000 
Hard DriveHard DriveCoolingMonitor
SanDisk Extreme PRO 480GB Samsung 830 Pro with OSX Custom Loop  Dell Ultrawide U3415W 
KeyboardPowerCaseMouse
Logitech G710 Evga G1300 Phanteks Enthoo Primo Logitech G502 
  hide details  
Reply
post #1360 of 21377
Is there anyway to set voltage higher than 1.2v permanently on the Classifieds or do you have to use the Classified overvolt tool each time you restart your computer?
Broke
(16 items)
 
  
CPUMotherboardGraphicsRAM
i9 7920x Asus Rampage VI Extreme Titan Xp Gskills Trident Z 4000 C16 
Hard DriveHard DriveCoolingCooling
Corsair Force NVMe Samsung 960 Evo 1260 Phobya Supernova EK Coolstream 360 XE 
OSMonitorKeyboardPower
Windows 10 Pro x64 Acer Predator X34 Razer EVGA G2 1200w 
CaseMouseMouse PadAudio
Primochill Praxis Wetbench Logitech G902 Razer Asus Xonar STX 
  hide details  
Reply
Broke
(16 items)
 
  
CPUMotherboardGraphicsRAM
i9 7920x Asus Rampage VI Extreme Titan Xp Gskills Trident Z 4000 C16 
Hard DriveHard DriveCoolingCooling
Corsair Force NVMe Samsung 960 Evo 1260 Phobya Supernova EK Coolstream 360 XE 
OSMonitorKeyboardPower
Windows 10 Pro x64 Acer Predator X34 Razer EVGA G2 1200w 
CaseMouseMouse PadAudio
Primochill Praxis Wetbench Logitech G902 Razer Asus Xonar STX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club