Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club
New Posts  All Forums:Forum Nav:

[Official] EVGA Classified & K|NGP|N Owner's Club - Page 1652

post #16511 of 21376
[/quote]
Quote:
Originally Posted by ssiperko View Post

Not sure myself as I'm using the 4pc bios ........ do you have better luck with the 2pc over the 4pc? (if you've used it)

I can't figure it out .... really frustrated here.

I set the voltages different for each card trying to maintain the same temps and I can't seem to get over 1500 core stable.

No volts... some volts.... back plate switches on/off.... kboost on/off.... OC on/off.

I can add 150 to the core yet GPU-z doesn't show a max core reading equal to the setting. My temps are fine (mid 40's to low 50's) in Fire Strike Extreme.

I tried the std and oc bios and they stink so far.

Anyone have a bios they made for water for the 980 KPE?

SS

From what I can recall I got better stability with the Kpex2c bios and I can confirm it doesnt work with the latest drivers so essentially the only working modded bios for these cards is the kpex4c.
Quote:
Originally Posted by xxdarkreap3rxx View Post

Is there also any software that will at least give me SOME idea of voltages? It feels like GPU-Z and Precision X say 1.21v all the time, even if it's more (like I'm pumping 1.5v+ @ 1700 and it says 1.21...).

Mate you need a digital multi meter which is about $10.00,connect it to card using the probeit that way you get the true voltage I have mine connected to it permanently.
Edited by dual109 - 5/22/15 at 6:18am
post #16512 of 21376
The kpex4c is no different for me than the stock oc bios. As for 1.3 pumping 1600. I don't see that happening with most kpes. I need at least 1.4. The issue is these crappy bios either suck for sli, aren't stable, or require way too much volt to hit clocks. Dude needs to do his name right and just release 1 good fing bios.

If someone could edit the 2c bios be great. Pretty much the only bios that benefited from voltage. Sadly it's a horrific crash fest and soooo not sli friendly.
post #16513 of 21376
Quote:
Originally Posted by nycgtr View Post

The kpex4c is no different for me than the stock oc bios. As for 1.3 pumping 1600. I don't see that happening with most kpes. I need at least 1.4. The issue is these crappy bios either suck for sli, aren't stable, or require way too much volt to hit clocks. Dude needs to do his name right and just release 1 good fing bios.

If someone could edit the 2c bios be great. Pretty much the only bios that benefited from voltage. Sadly it's a horrific crash fest and soooo not sli friendly.

Not even for a single card? Like damn, my G1 970s could do 1600 at like 1.275v...
post #16514 of 21376
Quote:
Originally Posted by nycgtr View Post

The kpex4c is no different for me than the stock oc bios. As for 1.3 pumping 1600. I don't see that happening with most kpes. I need at least 1.4. The issue is these crappy bios either suck for sli, aren't stable, or require way too much volt to hit clocks. Dude needs to do his name right and just release 1 good fing bios.

If someone could edit the 2c bios be great. Pretty much the only bios that benefited from voltage. Sadly it's a horrific crash fest and soooo not sli friendly.

Quote:
Originally Posted by xxdarkreap3rxx View Post

Not even for a single card? Like damn, my G1 970s could do 1600 at like 1.275v...

I could run 1650 on air with the x4pc bios on a single card with only .25mv added but sli stinks ..... I'm trying to work diff voltages on each card with a lil' success but dang it's rough.

IF I could find out what all the settings of the EVBot do I might be able to more but I've got nothing on that front.

SS
post #16515 of 21376
I'm probably just going to put both up for sale and wait for 980 TI to be released in a few weeks.
post #16516 of 21376
Looking to trade my 980 kpe and cash for a titan x if anyone is interested.

Just looking to try the new titan x.




FF
smile.gif
post #16517 of 21376
Quote:
Originally Posted by ssiperko View Post


I could run 1650 on air with the x4pc bios on a single card with only .25mv added but sli stinks ..... I'm trying to work diff voltages on each card with a lil' success but dang it's rough.

IF I could find out what all the settings of the EVBot do I might be able to more but I've got nothing on that front.

SS

I noticed with a higher clock bump doesn't guarentee actual higher performance

Quote:
Originally Posted by xxdarkreap3rxx View Post

I'm probably just going to put both up for sale and wait for 980 TI to be released in a few weeks.

I blocked mine so im going to just keep them till pascal.
post #16518 of 21376
same but I'm thinking, since these are premium cards I might be able to sell them for what I got them for ($600 each) but the blocks will def be lower valued. If the 980 TI comes out for 700 or 800, it'd be $200-400 to upgrade to them, and a bit more from selling two KPE blocks and getting TI blocks. Seems like the performance bump might be worth it, idk
post #16519 of 21376
Quote:
Originally Posted by nycgtr View Post

The kpex4c is no different for me than the stock oc bios. As for 1.3 pumping 1600. I don't see that happening with most kpes. I need at least 1.4. The issue is these crappy bios either suck for sli, aren't stable, or require way too much volt to hit clocks. Dude needs to do his name right and just release 1 good fing bios.

If someone could edit the 2c bios be great. Pretty much the only bios that benefited from voltage. Sadly it's a horrific crash fest and soooo not sli friendly.
Quote:
Originally Posted by nycgtr View Post

The kpex4c is no different for me than the stock oc bios. As for 1.3 pumping 1600. I don't see that happening with most kpes. I need at least 1.4. The issue is these crappy bios either suck for sli, aren't stable, or require way too much volt to hit clocks. Dude needs to do his name right and just release 1 good fing bios.

If someone could edit the 2c bios be great. Pretty much the only bios that benefited from voltage. Sadly it's a horrific crash fest and soooo not sli friendly.

Yeah agreed the 2c was the only bios I used on my card which responded to voltage not just sli unfriendly but latest drivers no longer support it so if you game as well it pretty much obsolete.
post #16520 of 21376
Quote:
Originally Posted by nycgtr View Post

I noticed with a higher clock bump doesn't guarentee actual higher performance
I blocked mine so im going to just keep them till pascal.

It seems the memory does hold back the #'s for sure.

SS
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club