Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club
New Posts  All Forums:Forum Nav:

[Official] EVGA Classified & K|NGP|N Owner's Club - Page 839

post #8381 of 21377
Quote:
Originally Posted by mcg75 View Post

Use the Rev 2 bios from the first page.

There is a normal use bios and a bench bios labeled LN2.

Make sure to save your original bios in case you have to flash back.

Before you replied back I flashed the Rev 3 bios and it worked without a hitch. After reading your post I thought I might have flashed the wrong bios and went back to flash the Rev 2 bios but nvflash told me the board id was mismatched so I aborted. Are you sure I should flash Rev 2 even with the board id error or is Rev 3 fine since it worked?
post #8382 of 21377
Quote:
Originally Posted by seryou92 View Post

Before you replied back I flashed the Rev 3 bios and it worked without a hitch. After reading your post I thought I might have flashed the wrong bios and went back to flash the Rev 2 bios but nvflash told me the board id was mismatched so I aborted. Are you sure I should flash Rev 2 even with the board id error or is Rev 3 fine since it worked?
If the Rev 3 bios worked you should be fine.
Super P's rig
(20 items)
 
  
CPUMotherboardGraphicsRAM
5960x ASUS X99-A II Asus GTX 1080 Ti Corsair Vengeance DDR4 3000 
Hard DriveHard DriveHard DriveOptical Drive
MyDigitalSSD BPX NVMe Samsung 850 EVO Seagate Momentus XT 500 GB External DVDRW 
CoolingCoolingOSMonitor
EK-XLC Predator 240 Swiftech 240mm Radiator Windows 10 Samsung 40" 4K - UN40KU6290 
KeyboardPowerCaseMouse
G710+ EVGA SuperNOVA 850G2 Fractal Design Define S G700s 
Mouse PadAudioAudioAudio
Vipamz Extended XXXL Asus U7 M-Audio AV40 Sennheiser HD 439 
  hide details  
Reply
Super P's rig
(20 items)
 
  
CPUMotherboardGraphicsRAM
5960x ASUS X99-A II Asus GTX 1080 Ti Corsair Vengeance DDR4 3000 
Hard DriveHard DriveHard DriveOptical Drive
MyDigitalSSD BPX NVMe Samsung 850 EVO Seagate Momentus XT 500 GB External DVDRW 
CoolingCoolingOSMonitor
EK-XLC Predator 240 Swiftech 240mm Radiator Windows 10 Samsung 40" 4K - UN40KU6290 
KeyboardPowerCaseMouse
G710+ EVGA SuperNOVA 850G2 Fractal Design Define S G700s 
Mouse PadAudioAudioAudio
Vipamz Extended XXXL Asus U7 M-Audio AV40 Sennheiser HD 439 
  hide details  
Reply
post #8383 of 21377
Quote:
Originally Posted by seryou92 View Post

Before you replied back I flashed the Rev 3 bios and it worked without a hitch. After reading your post I thought I might have flashed the wrong bios and went back to flash the Rev 2 bios but nvflash told me the board id was mismatched so I aborted. Are you sure I should flash Rev 2 even with the board id error or is Rev 3 fine since it worked?

If Rev 3 worked fine then you can run it just fine as well.

Rev 2 would come up board mismatch but it would still work just fine as well.
Upstairs Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
4770k Asus Maximus VI Hero evga 1080 Ti with Hybrid mod Corsair Vengeance Pro 2133 mhz 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500gb WD Caviar Black Corsair h100i GTX Windows 8.1 64bit 
MonitorPowerCase
xb280hk EVGA Supernova 1000 G2 Corsair Carbide Air 540 
  hide details  
Reply
Upstairs Rig
(11 items)
 
  
CPUMotherboardGraphicsRAM
4770k Asus Maximus VI Hero evga 1080 Ti with Hybrid mod Corsair Vengeance Pro 2133 mhz 
Hard DriveHard DriveCoolingOS
Samsung 850 EVO 500gb WD Caviar Black Corsair h100i GTX Windows 8.1 64bit 
MonitorPowerCase
xb280hk EVGA Supernova 1000 G2 Corsair Carbide Air 540 
  hide details  
Reply
post #8384 of 21377
Quote:
Originally Posted by Aesthethc View Post

Does anyone know if i can use the EVGA backplate with an EK full block for the 780 classified? Or will i need to get an EK backplate?
go back a few pages, you will find my post about which screws work when mounting the evga backplate to ek block.

Sent from Note 3
post #8385 of 21377
Thread Starter 
Quote:
Originally Posted by Failboat View Post

Got my Kingpin today and would like to be added. =)

http://www.techpowerup.com/gpuz/mypzw/

congrats first kingpin added to list.

Quote:
Originally Posted by Jpmboy View Post

Hey SI-1 - count me in:


DSC00076.JPG 1317k .JPG file
DSC00078.JPG 1634k .JPG file

'Regular" Ti Classifieds sitting out this dance:


oh yeah - Valley on noob bios/Air and just +130 on the gpu. Stock volts:


water block in a couple of days.

second Kingpin added

Quote:
Originally Posted by cobz View Post





Just got them today.. Add me Strong..... Thanks brother.. thumb.gif

you are the third.

Quote:
Originally Posted by johnnyfive622 View Post

Hey all, just joining the Classified Club. This is the nicest card I have ever had, and I wanted to thoroughly test it before putting it under water. The issue is I don't really know how. I can run benchmarks or games like tombraider to get frame rates, but I am not sure what to compare them to or what to push for. I tried to search this thread, but got overwhelmed fairly quickly. Would one of yall more knowledgeable folks help me out?

If it matters, my system specs:
Mobo: EVGA X58 Classified
CPU: i7 920 C0 at 3.6 ghz
GPU: EVGA GTX 780 TI Classified
PSU: 850W
Monitor: Samsung 27" 1920x1080 (i know, ill upgrade soon)

I really appreciate any guidance provided, even if it comes in the form of "Hey stupid, see this earlier post."

Quote:
Originally Posted by chartiet View Post

sign me up please, thank you. o and hynix mem smile.gif



http://www.techpowerup.com/gpuz/gbbug/
http://www.3dmark.com/3dm/2296052

Quote:
Originally Posted by funkmetal View Post

So these arrived today biggrin.gif




And the rest of the parts that came today


Quote:
Originally Posted by SpacemanSpiff46 View Post

Please add me! I bought my 780 Ti classies day 1 and got my rig together just prior to new years but am still playing around with clocks and such.

GPU-Z: http://www.techpowerup.com/gpuz/n479e/




Quick question, does the Classfied voltage controller follow the same rules as the EVbot? As in, if I apply 1.35v on the software, when under load it will actually be pushing 1.5v? I do not have a DMM to check this myself.

I am still getting random restarts and/or BSODs when pushing much more than 1.35v and 400kHz PWM Freq. I'm on skyn3ts latest bios.

Quote:
Originally Posted by johnnyfive622 View Post

Thanks.

Validation: http://www.techpowerup.com/gpuz/f3npw/

So far I have run a few things. All with stock clocks/bios. I haven't played with OC or power level yet.
Heaven
Score:2254
FPS Min / Avg / Max 9.0 / 89.5 / 167.5

Valley
Score: 2680
FPS Min / Avg / Max 18.9 / 64.1 / 100.6

Bioshock benchmark max settings
FPS MIn / Avg / Max 8.8 / 123 / 386

Tombraider benchmark max settings
FPS Min / Avg / Max 70 / 93.2 / 116

GPU clock speed during tests: 1163

How am I looking? The card seems to be doing from what I can see in reviews.

Quote:
Originally Posted by glintch View Post

Tormented but I have a feeling KPE will not yeild me better gaming and I'd need to way up my PSU for any voltage play.

Currently on one 780 Ti Classified
http://www.techpowerup.com/gpuz/fphw/

This seems to be stable in everything:

Driver: nvlddmkm 9.18.13.3221 (ForceWare 332.21) / Win8 64
GPU Clock: 1120 MHz Memory Clock: 1875 MHz
GPU Default: 1020 MHz Memory Default: 1750 MHz
GPU Overclock: +10% Mem Overclock: +7%

Here are my scores with Single 780 Ti Classified [4770K @ 4.3 OC used with GPU OC +100-125GPU +200-225MEM | 4770K @ Stock for Stock GPU numbers, RAM 8GB CL9 1600]

FireStrike Extreme Stock: 5427(5773 Graphics Score) to OC: 5963 (6340 Graphics Score) stays 70-73 degrees in most tests and games with the ACX Cooler
Valley Extreme 1080p Stock 72 FPS 3041 to OC: 79.1 FPS / 3310
Heaven Extreme 1080p Stock: 65 FPS 1644 to OC: 70 FPS 1774 (This one always seems low, I might have the wrong version of Heaven benchmark or my CPU)
Resident Evil 1440P ULTRA - 13845(stock) to 14906(OC)
TombRaider 1440p SSAO everything ULTRA + TressFX - Stock: 63 OC : 68.6 (50-90)
Metro 2033 1440p SSAO everything DoF Off - Stock: 63 OC: 69.33

Just for the EK block in, this will be a long weekend trying to decide what to do if I want to go KPE or down to 780 Classy SLI for single monitor 1440p 60Hz gaming.

UPDATED: Got FireStrikeExtreme to 6015 on +125/225 http://www.3dmark.com/fs/1606611

Quote:
Originally Posted by Moolers View Post

Thanks for the info. So I can take for granted that if I apply a voltage of 1.3v that its definitely getting 1.3v, regardless?

just be careful because it is probably a lot higher than 1.3v. Depending on some of your other settings 1.3v can become 1.5v under load.

Quote:
Originally Posted by provost View Post

Hey fellas, just curious as to what the average ASIC on the Ti classy is?
Just trying to compare it to KPE Ti classy to see which of the two really got the binned cores, if any..lol (assuming ASIC is one of the factors considered in the binning process)

Alot of them are very low 60's. But if lower asic really does mean better performance under ln2 then I guess it makes sense, it just doesn't really translate well to air/water. I have noticed with all the classy's since the 780 release all my cards with higher asic clocked better under water.

Quote:
Originally Posted by marc0053 View Post

Can i join the club?
Just received my Kingpin:
Here are a few stock setting results
Stock cooler for now and stock settings, tomb raider, valley and heaven all ran at stock:

When you get a chance please post your validation.

List updated, I lost some multi quotes along the way. If I missed anyone please let me know. We are almost at 150 members so please post a gpuz validation if you haven't. it would be cool to hit 150.
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
post #8386 of 21377
Here is my validation for Kingpin:
http://www.techpowerup.com/gpuz/mg9e3/
post #8387 of 21377
Thread Starter 
Quote:
Originally Posted by marc0053 View Post

Here is my validation for Kingpin:
http://www.techpowerup.com/gpuz/mg9e3/

thanks a lot. Will add now. How is it going with your kingpin. It's weird because i thought we would be seeing a ton of benches right now from everyone but I don't see any really.
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
post #8388 of 21377
my 2 kingpin

post #8389 of 21377
Quote:
Originally Posted by strong island 1 View Post

thanks a lot. Will add now. How is it going with your kingpin. It's weird because i thought we would be seeing a ton of benches right now from everyone but I don't see any really.

My Kingpin does 1279MHz on stock bios with +75mv in overvoltage+Kboost. Havent tried switching the +25mv switches on the back of the card. I expect my EK waterblock today.
Memory does well thought with +310 stable.
Max valley score so far is 85FPS
post #8390 of 21377
Quote:
Originally Posted by strong island 1 View Post

How is it going with your kingpin. It's weird because i thought we would be seeing a ton of benches right now from everyone but I don't see any really.

well they do 1280 out of the box with 1.175
1300 with 1.200


thats all

will do some non sli tests with 1.4volts

1350 crashing with 1.3 in classified tool
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] EVGA Classified & K|NGP|N Owner's Club