Overclock.net › Forums › Components › Power Supplies › Power supply overclocking 12v rail ripple
New Posts  All Forums:Forum Nav:

Power supply overclocking 12v rail ripple

post #1 of 5
Thread Starter 
This is the power supply I have

http://www.jonnyguru.com/modules.php?name=NDReviews&op=Story2&reid=7
(Notice the 110ma ripple on the 12v rail)

It's 6-7 years old now and quite beatup.




Right now:1.42 volts,2600k @4.4ghz. (Below this voltage unstable)

Yesterday: 4.7 ghz, 1.47v, OCCT power supply test(stresses cpu and gpu), no crashes.

Went to browse the Internet, froze an hour later. Freezing occurs mainly when idle.
No BSOD, just black/white screen/frozen image.



My 2600k seems to be a poor chip. The freezing at idle makes me want to believe it could be something to do with either my power supply or the load line calibration vdroop.

I have the LLC set to extreme in my p8z77-m pro. If I lower the LLC I crash much sooner, and I have to put way more voltage.


Think the PSU could be the issue?
post #2 of 5
If its 6-7 years then it might very well be on its way out but i cant say that for sure
Seravee
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 6850K Gigabyte X99 Ultra Gaming EVGA GTX 1080 FTW2 Kingston HyperX DDR4 Savage 3000 MHz 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo WD Green WD40EZRX  WD Green WD60EZRX  WD Red WD80EFZX 8TB  
Optical DriveCoolingCoolingOS
LG CH12NS30 5x Noctua NF-A14 FLX Noctua NH-D15S Windows 7 64 Bit 
MonitorKeyboardPowerCase
Asus PG279Q Corsair Gaming Strafe RGB EVGA SuperNova G2 750 watt Phanteks Enthoo Luxe 
MouseMouse PadAudioAudio
Roccat Kone XTD Laser Roccat Sense Metor Sennheiser HD 598 Onkyo TX NR646  
AudioOtherOther
Harman Kardon HKTS 60 CableMod E series PSU cable set CableMod LED Strips 
  hide details  
Reply
Seravee
(23 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 6850K Gigabyte X99 Ultra Gaming EVGA GTX 1080 FTW2 Kingston HyperX DDR4 Savage 3000 MHz 
Hard DriveHard DriveHard DriveHard Drive
Samsung 840 Evo WD Green WD40EZRX  WD Green WD60EZRX  WD Red WD80EFZX 8TB  
Optical DriveCoolingCoolingOS
LG CH12NS30 5x Noctua NF-A14 FLX Noctua NH-D15S Windows 7 64 Bit 
MonitorKeyboardPowerCase
Asus PG279Q Corsair Gaming Strafe RGB EVGA SuperNova G2 750 watt Phanteks Enthoo Luxe 
MouseMouse PadAudioAudio
Roccat Kone XTD Laser Roccat Sense Metor Sennheiser HD 598 Onkyo TX NR646  
AudioOtherOther
Harman Kardon HKTS 60 CableMod E series PSU cable set CableMod LED Strips 
  hide details  
Reply
post #3 of 5
Sounds like too much LLC to me. Reduce LLC, increase Vcore and try to use an offset Vcore which will mean the Vcore will drop with CPU Clock speed.
Lounge Gaming
(13 items)
 
NAS
(14 items)
 
Beast
(17 items)
 
CPUMotherboardGraphicsRAM
i7 7700k 4.9Ghz 1.312v Asus Z170i Pro Gaming MSI GAMING GTX 970 1545/3900Mhz 1.23v G.Skill Trident Z 2x8GB 3000Mhz 14-14-32 1.35v 
Hard DriveHard DriveCoolingOS
Toshiba DT01ACA300 Intel X25-M 160GB RAID0 Noctua NH-U14S Windows 10 Pro x64 
MonitorPowerCaseAudio
Pioneer PDP4280XD Corsair RM650x Fractal Node 304 B&W 602S2's, B&W M1 Surround, Arendal Sub1 
Audio
Yamaha RX-A1010 
CPUMotherboardRAMHard Drive
i7 3770 4.38Ghz 1.12v Asus P8Z77-I DELUXE Kingston HyperX FURY Series 16GB (2x 8GB) 2200M... Crucial M4 128GB 
Hard DriveHard DriveHard DriveCooling
Western Digial 3TB ACA Seagate Enterprise 2TB Western Digital Black 2TB Coolermaster Hyper 212 Evo 
OSMonitorPowerCase
Windows 10 Pro BenQ 24" Monitor Seasonic M12II 620W Fractal Design Node 304 
  hide details  
Reply
Lounge Gaming
(13 items)
 
NAS
(14 items)
 
Beast
(17 items)
 
CPUMotherboardGraphicsRAM
i7 7700k 4.9Ghz 1.312v Asus Z170i Pro Gaming MSI GAMING GTX 970 1545/3900Mhz 1.23v G.Skill Trident Z 2x8GB 3000Mhz 14-14-32 1.35v 
Hard DriveHard DriveCoolingOS
Toshiba DT01ACA300 Intel X25-M 160GB RAID0 Noctua NH-U14S Windows 10 Pro x64 
MonitorPowerCaseAudio
Pioneer PDP4280XD Corsair RM650x Fractal Node 304 B&W 602S2's, B&W M1 Surround, Arendal Sub1 
Audio
Yamaha RX-A1010 
CPUMotherboardRAMHard Drive
i7 3770 4.38Ghz 1.12v Asus P8Z77-I DELUXE Kingston HyperX FURY Series 16GB (2x 8GB) 2200M... Crucial M4 128GB 
Hard DriveHard DriveHard DriveCooling
Western Digial 3TB ACA Seagate Enterprise 2TB Western Digital Black 2TB Coolermaster Hyper 212 Evo 
OSMonitorPowerCase
Windows 10 Pro BenQ 24" Monitor Seasonic M12II 620W Fractal Design Node 304 
  hide details  
Reply
post #4 of 5
Quote:
Originally Posted by jigglywiggly View Post

My 2600k seems to be a poor chip. The freezing at idle makes me want to believe it could be something to do with either my power supply or the load line calibration vdroop.

I have the LLC set to extreme in my p8z77-m pro. If I lower the LLC I crash much sooner, and I have to put way more voltage.


Think the PSU could be the issue?

Sounds like you don't understand LLC's purpose and configuration to me. Use offset to increase your voltage like the other poster said for a more stable and energy efficient overclock, and lower your load-line calibration from Extreme to medium or high. LLC doesnt cause vdroop, and it isnt supposed to be doing anything when the CPU is at idle. Also it is bad for your processor to run really high levels of LLC because it can hammer the CPU with massive voltage spikes, best if you keep it turned down to one of the two lowest settings.
Gaming
(17 items)
 
Gaming PC
(20 items)
 
 
CPUMotherboardGraphicsRAM
7700K AS Rock Z170 OC Formula Titan X Pascal 2050MHz 64GB DDR4-3200 14-14-14-34-1T 
Hard DriveHard DriveHard DriveCooling
950 EVO m.2 OS drive 850 EVO 1TB games drive Intel 730 series 500GB games drive Custom water cooling 
OSMonitorKeyboardPower
Win 10 Pro x64 AMH A399U E-Element mechanical, black switches, Vortex b... EVGA G3 1kw 
CaseMouseAudioAudio
Lian-Li PC-V1000L Redragon M901 LH Labs Pulse X Infinity DAC Custom built balanced tube amp with SS diamond ... 
Audio
MrSpeakers Alpha Prime 
  hide details  
Reply
Gaming
(17 items)
 
Gaming PC
(20 items)
 
 
CPUMotherboardGraphicsRAM
7700K AS Rock Z170 OC Formula Titan X Pascal 2050MHz 64GB DDR4-3200 14-14-14-34-1T 
Hard DriveHard DriveHard DriveCooling
950 EVO m.2 OS drive 850 EVO 1TB games drive Intel 730 series 500GB games drive Custom water cooling 
OSMonitorKeyboardPower
Win 10 Pro x64 AMH A399U E-Element mechanical, black switches, Vortex b... EVGA G3 1kw 
CaseMouseAudioAudio
Lian-Li PC-V1000L Redragon M901 LH Labs Pulse X Infinity DAC Custom built balanced tube amp with SS diamond ... 
Audio
MrSpeakers Alpha Prime 
  hide details  
Reply
post #5 of 5
Thread Starter 
Quote:
Originally Posted by EniGma1987 View Post

Sounds like you don't understand LLC's purpose and configuration to me. Use offset to increase your voltage like the other poster said for a more stable and energy efficient overclock, and lower your load-line calibration from Extreme to medium or high. LLC doesnt cause vdroop, and it isnt supposed to be doing anything when the CPU is at idle. Also it is bad for your processor to run really high levels of LLC because it can hammer the CPU with massive voltage spikes, best if you keep it turned down to one of the two lowest settings.


Yeah I know, it tries to keep a constant voltage at all loads instead of dropping it on load while current increases. I know the overshoots are probably what is causing the issue.


So for now, I put it at 1.52 volts and LLC set to high and it seems stable so far.


I didn't know there was a difference between manual voltage and the offset, I'll play with that.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Power Supplies
Overclock.net › Forums › Components › Power Supplies › Power supply overclocking 12v rail ripple