Overclock.net › Forums › Cooling › Water Cooling › I need 90° adapter fitting advice!
New Posts  All Forums:Forum Nav:

I need 90° adapter fitting advice!

post #1 of 5
Thread Starter 
I'm using 3/4 OD tubing and my pump top is going to have two 90 degree fittings, one for in and one for out. For the pump top input, I'm going to use one of these:

http://www.frozencpu.com/products/10755/ex-tub-679/Bitspower_G14_Thread_90-Degree_Rotary_12_ID_x_34_OD_Compression_Fitting_-_Matte_Black_BP-MB90R2LCPF-CC5.html

However, for the pump top output, I need a 90 degree fitting that goes into a rigid fitting. Is it possible to use these two fittings together?

http://www.frozencpu.com/products/10376/ex-tub-629/Bitspower_G14_Matte_Black_Rotary_90_G14_Adapter_BP-MB90R.html

http://www.frozencpu.com/products/20536/ex-tub-1880/PrimoChilll_12_OD_Rigid_Ghost_Compression_Fittings_-_Single_-_Anodized_Black.html

I can spot the obvious differences between the Bitspower single 90° adapter and the Bitspower combined 90° adapter and compression fitting. I guess the ultimate question is, will the single 90° adapter work properly with something like the PrimoChill Rigid compression? Will it clear the adapter properly?
post #2 of 5
no, that will not work you need something like this ....
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_346_393_620&products_id=26764

there should be no issues with that one but if so you can get 2 of these they are allot taller

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_346_830_446&products_id=29108


hope this helped!
-ROG
post #3 of 5
Thread Starter 
Aside from it being rotary, what's the difference between what I posted and what you posted? The two fittings have the exact same dimensions at the angled part (18mm).

http://www.frozencpu.com/products/10376/ex-tub-629/Bitspower_G14_Matte_Black_Rotary_90_G14_Adapter_BP-MB90R.html

http://www.frozencpu.com/products/10370/ex-tub-617/Bitspower_G_14_Thread_90_Fitting_Adapter_-_Matte_Black_BP-MBWP-C39.html
post #4 of 5
oh , I did not see the other link at the top the one I clicked on had a compression fitting at the end , but I would buy the rotary ones as they can spin and such and they also come in handy!
as they are taller , able to spin, and built like a brick, cause I am not sure that the bits-power one will fit (being too low for the pump top) but I would imagine it would be fine!



-ROG
post #5 of 5
Thread Starter 
Thanks man, exactly what I wanted to know.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › I need 90° adapter fitting advice!