Overclock.net › Forums › Cooling › Water Cooling › Are my temps any good? 3570k @4,4GHz
New Posts  All Forums:Forum Nav:

Are my temps any good? 3570k @4,4GHz

post #1 of 7
Thread Starter 
Hello everybody, a couple of days ago I intalled my first custom liquid cooling loop. It has two 240mm radiators cooling only my cpu. So far I've only seen a temperature drop of around 10°C between my old Gelid Tranquilo Rev. 2 and my new loop. I'm running a 3570k at 4,4GHz with 1,24V. My temps are now 75~80°C while running Prime 95 small fft and 25~30°C idle. Thanks in advance.
Edited by R3MM3 - 8/4/13 at 3:32am
post #2 of 7
Quote:
Originally Posted by R3MM3 View Post

Hello everybody, a couple of days ago I intalled my first custom liquid cooling loop. It has two 240mm radiators cooling only my cpu. So far I've only seen a temperature drop of around 10°C between my old Gelid Tranquilo Rev. 2 and my new loop. I'm running a 3570k at 4,4GHz with 1,24V. Thanks in advance.

what exactly is the temp? my h100i hovers around 60c on 4.5/1.2v
The Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] Core i5 3570k @ 4.2GHz/1.10v [ASUS] P8Z77-I Deluxe [EVGA] GeForce GTX 970 SSC ACX 2.0+ 4GB @ 1342/... [Corsair] Vengeance 8GB (2x4GB) DDR3 @ 1600MHz ... 
Hard DriveHard DriveCoolingOS
[Samsung] 840 250GB SSD  [Western Digital] WD Black 1TB WD1003FZEX HDD [Noctua] NH-L9i Low Profile CPU Cooler  [Microsoft] Windows 7 Home Premium (64-Bit) 
MonitorKeyboardPowerCase
[ASUS] VE248H 24" 1920x1080 60hz Monitor [Ducky] DK2108 Zero Mechanical Keyboard (Cherry... [Antec] TruePower Classic 550W 80 Plus Gold Pow... [Fractal Design] Node 304 ITX Case (Black)  
MouseMouse PadAudio
[Razer] Deathadder Black Edition [Corsair] Vengeance MM200 Mouse Mat Standard  [Creative] GigaWorks T40 Series II 2.0 Speakers 
  hide details  
Reply
The Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] Core i5 3570k @ 4.2GHz/1.10v [ASUS] P8Z77-I Deluxe [EVGA] GeForce GTX 970 SSC ACX 2.0+ 4GB @ 1342/... [Corsair] Vengeance 8GB (2x4GB) DDR3 @ 1600MHz ... 
Hard DriveHard DriveCoolingOS
[Samsung] 840 250GB SSD  [Western Digital] WD Black 1TB WD1003FZEX HDD [Noctua] NH-L9i Low Profile CPU Cooler  [Microsoft] Windows 7 Home Premium (64-Bit) 
MonitorKeyboardPowerCase
[ASUS] VE248H 24" 1920x1080 60hz Monitor [Ducky] DK2108 Zero Mechanical Keyboard (Cherry... [Antec] TruePower Classic 550W 80 Plus Gold Pow... [Fractal Design] Node 304 ITX Case (Black)  
MouseMouse PadAudio
[Razer] Deathadder Black Edition [Corsair] Vengeance MM200 Mouse Mat Standard  [Creative] GigaWorks T40 Series II 2.0 Speakers 
  hide details  
Reply
post #3 of 7
Thread Starter 
I'm now at 80°C (using realtemp) after 2 hours of prime
post #4 of 7
yeah something must be wrong with the cooler, i'm not really that experienced in custom loops but it possibly could be seated wrong
The Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] Core i5 3570k @ 4.2GHz/1.10v [ASUS] P8Z77-I Deluxe [EVGA] GeForce GTX 970 SSC ACX 2.0+ 4GB @ 1342/... [Corsair] Vengeance 8GB (2x4GB) DDR3 @ 1600MHz ... 
Hard DriveHard DriveCoolingOS
[Samsung] 840 250GB SSD  [Western Digital] WD Black 1TB WD1003FZEX HDD [Noctua] NH-L9i Low Profile CPU Cooler  [Microsoft] Windows 7 Home Premium (64-Bit) 
MonitorKeyboardPowerCase
[ASUS] VE248H 24" 1920x1080 60hz Monitor [Ducky] DK2108 Zero Mechanical Keyboard (Cherry... [Antec] TruePower Classic 550W 80 Plus Gold Pow... [Fractal Design] Node 304 ITX Case (Black)  
MouseMouse PadAudio
[Razer] Deathadder Black Edition [Corsair] Vengeance MM200 Mouse Mat Standard  [Creative] GigaWorks T40 Series II 2.0 Speakers 
  hide details  
Reply
The Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
[Intel] Core i5 3570k @ 4.2GHz/1.10v [ASUS] P8Z77-I Deluxe [EVGA] GeForce GTX 970 SSC ACX 2.0+ 4GB @ 1342/... [Corsair] Vengeance 8GB (2x4GB) DDR3 @ 1600MHz ... 
Hard DriveHard DriveCoolingOS
[Samsung] 840 250GB SSD  [Western Digital] WD Black 1TB WD1003FZEX HDD [Noctua] NH-L9i Low Profile CPU Cooler  [Microsoft] Windows 7 Home Premium (64-Bit) 
MonitorKeyboardPowerCase
[ASUS] VE248H 24" 1920x1080 60hz Monitor [Ducky] DK2108 Zero Mechanical Keyboard (Cherry... [Antec] TruePower Classic 550W 80 Plus Gold Pow... [Fractal Design] Node 304 ITX Case (Black)  
MouseMouse PadAudio
[Razer] Deathadder Black Edition [Corsair] Vengeance MM200 Mouse Mat Standard  [Creative] GigaWorks T40 Series II 2.0 Speakers 
  hide details  
Reply
post #5 of 7
It's always worth a re seat of the block just to check that it is installed correctly, and that the TIM coverage was good.

However, Ivy Bridge tends to reach a point where any increase in voltage sends the temperatures right up.
For my chip, it happens at around 1.27 - 1.28 volts, and your chips threshold may be lower.

If it were me, I'd be perfectly happy with a Prime temperature of 80 and a clock of 4.4GHz - but then again mine is in a small case and an air cooler tongue.gif


Although I still think it could be worth a block re seat to see if you can drop that load temperature a bit.


Hope that this helps.
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus P8Z77-I Deluxe MSI TF3 7950 OC BE 1000/1500 16GB Corsair XMS3 (8x2GB) 1600MHz 
Hard DriveHard DriveCoolingOS
Crucial M4 128GB WD 2TB Caviar Green Noctua NH-D14 Windows 7 Home Premium 64-bit 
MonitorKeyboardPowerCase
Asus VS247H-P Logitech K360 Corsair HX650 Fractal Design Node 304 
MouseMouse Pad
Logitech MX  SteelSeries QcK 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus P8Z77-I Deluxe MSI TF3 7950 OC BE 1000/1500 16GB Corsair XMS3 (8x2GB) 1600MHz 
Hard DriveHard DriveCoolingOS
Crucial M4 128GB WD 2TB Caviar Green Noctua NH-D14 Windows 7 Home Premium 64-bit 
MonitorKeyboardPowerCase
Asus VS247H-P Logitech K360 Corsair HX650 Fractal Design Node 304 
MouseMouse Pad
Logitech MX  SteelSeries QcK 
  hide details  
Reply
post #6 of 7
Quote:
Originally Posted by R3MM3 View Post

Hello everybody, a couple of days ago I intalled my first custom liquid cooling loop. It has two 240mm radiators cooling only my cpu. So far I've only seen a temperature drop of around 10°C between my old Gelid Tranquilo Rev. 2 and my new loop. I'm running a 3570k at 4,4GHz with 1,24V. My temps are now 75~80°C while running Prime 95 small fft and 25~30°C idle. Thanks in advance.

Yes that is definitely off. I get 4.4 at around 1.23v and my max temps will hit 53c on a 2600k, I also have my OC graphics card going too. Try reseating the cpu block, check the pump speed, try a different TIM.
Baby Blue
(27 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600K OC ASUS P8P67 DELUXE EVGA GTX780 Dual Classified Hydro Copper 16GB G.SKILL Ripjaws X Series DDR3 1600 
Hard DriveHard DriveOptical DriveCooling
Crucial M500 960GB 1.5TB Western Digital ASUS 24X XSPC Raystorm CPU Block 
CoolingCoolingCoolingCooling
PrimoChill PrimoFlex Advanced LRT Tubing Arctic Silver 5 Thermal Compound Bitspower G1/4 1/2" 3/4" Compression fittings Bitspower Dual D5 Mod 
CoolingCoolingCoolingCooling
Black Ice SR1 480 Rad 2x Black Ice SR1 360 Rad Black Ice SR1 240 2x D5 Vario Pump - Koolance with Bitspower Blue... 
CoolingCoolingOSMonitor
Phobya Dual 5.25" Bay Reservoir FrozenQ Blue Helix Windows 7 64-bit 2 x 27" QX2710 @ 120Hz (2560x1440) 
KeyboardPowerCaseMouse
Logitech G110 Gaming Keyboard CORSAIR Gold AX1200i Case Labs TH10 Razer Naga 
AudioOther
Sennheiser PC 350 Scythe Kaze Q-12 5.25" Bay 12 Channel Fan Contr... 
  hide details  
Reply
Baby Blue
(27 items)
 
  
CPUMotherboardGraphicsRAM
i7-2600K OC ASUS P8P67 DELUXE EVGA GTX780 Dual Classified Hydro Copper 16GB G.SKILL Ripjaws X Series DDR3 1600 
Hard DriveHard DriveOptical DriveCooling
Crucial M500 960GB 1.5TB Western Digital ASUS 24X XSPC Raystorm CPU Block 
CoolingCoolingCoolingCooling
PrimoChill PrimoFlex Advanced LRT Tubing Arctic Silver 5 Thermal Compound Bitspower G1/4 1/2" 3/4" Compression fittings Bitspower Dual D5 Mod 
CoolingCoolingCoolingCooling
Black Ice SR1 480 Rad 2x Black Ice SR1 360 Rad Black Ice SR1 240 2x D5 Vario Pump - Koolance with Bitspower Blue... 
CoolingCoolingOSMonitor
Phobya Dual 5.25" Bay Reservoir FrozenQ Blue Helix Windows 7 64-bit 2 x 27" QX2710 @ 120Hz (2560x1440) 
KeyboardPowerCaseMouse
Logitech G110 Gaming Keyboard CORSAIR Gold AX1200i Case Labs TH10 Razer Naga 
AudioOther
Sennheiser PC 350 Scythe Kaze Q-12 5.25" Bay 12 Channel Fan Contr... 
  hide details  
Reply
post #7 of 7
Thread Starter 
Ok, so I used some different TIM, reseated the block and i'm now running the pump at 7v. My max temps are now 75°C. Mind you I am using a alphacool DC-LT pump and an alphacool xp³ cpu waterblock. So nothing to high end. I also delid my cpu, but I already got similar temps before I did this so I don't think it has anything to do with it.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Are my temps any good? 3570k @4,4GHz