post #1 of 1
Thread Starter 
Hey guys, I've been attempting to setup my High Flow Meter USB with no success. I have it hooked up by USB at the moment but I cannot seem to get it to show up under the "sensors" tab under aquaero.

vxWQ2KI.jpg
2307cmT.jpg
PrfiKY7.jpg
HUrkgze.jpg

The flow rate and internal temperature sensor seem to be working in the second picture in the alarm configuration tab.

Thanks for all your help.
Edited by pitahbread - 8/4/13 at 7:35pm