Overclock.net › Forums › Intel › Intel CPUs › This overclocking doesn't look right
New Posts  All Forums:Forum Nav:

This overclocking doesn't look right

post #1 of 23
Thread Starter 
This is my first try OC'ing.
I can't seem to get core speed pass 266 MHz. Anything above 266 MHz pc would restart itself when run ORTHOS stress test.

Any help is greatly appreciated.

Thanks
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3200 Mhz Intel D975XBX v.304 e-GeForce 7900 GT KO 4BG OCZ DDR2 PC2-5400/667MHz 
Hard DriveOSMonitorPower
SATA 500GB Maxtor RAID 0 Windows XP pro sp2 NEC Opticlear 90GX2 Antec Neo HE 550 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3200 Mhz Intel D975XBX v.304 e-GeForce 7900 GT KO 4BG OCZ DDR2 PC2-5400/667MHz 
Hard DriveOSMonitorPower
SATA 500GB Maxtor RAID 0 Windows XP pro sp2 NEC Opticlear 90GX2 Antec Neo HE 550 
  hide details  
Reply
post #2 of 23
What all have you tried so far? I'm assuming you followed a guide. Can you link which one you used to get your settings?

Edit: Just trying to get an idea on what you might be doing wrong. It's strange that it won't oc at all.

Here is what I started with.

Multiplier - 9
FSB - 333
Vcore - 1.4
Vmch - 1.5
vDimm - 1.9(Ratio 1:1, winds up being 666, Timings 5-5-5-12)
vFSB - 1.3
PCIE - 101
PCI - 33.3
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 8700k z370 gaming 7 evga 980 ti 32 Corsair 3200 
Hard DriveOptical DriveOSMonitor
samsung 950 HP dual layer Windows 7 64 27 dell ips  
KeyboardPowerCaseMouse
G15 1050 evga corsair 540 air G900 
Mouse Pad
generic 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 8700k z370 gaming 7 evga 980 ti 32 Corsair 3200 
Hard DriveOptical DriveOSMonitor
samsung 950 HP dual layer Windows 7 64 27 dell ips  
KeyboardPowerCaseMouse
G15 1050 evga corsair 540 air G900 
Mouse Pad
generic 
  hide details  
Reply
post #3 of 23
Thread Starter 
Quote:
Originally Posted by CrazyHeaven View Post
What all have you tried so far? I'm assuming you followed a guide. Can you link which one you used to get your settings?

Edit: Just trying to get an idea on what you might be doing wrong. It's strange that it won't oc at all.
Chipset Configuration in BIOS:
after in chipset configuration override.

Default setting:
Host Burn-in Mode Type <Positive>
Host Burn-in Mode Percentage [0] -------> change this to [11]
PCI Burn-in Mode <Default>
PCI Express Burn-in Mode <Default>
MCH Voltage Override <Default>--------> change to [1.650v]
Front Side Bus Voltage Override <Default>-----> change to [1.333v]

This all is see in the BIOS.




Memory Configuration

SDRAM Control <Automatic>
Memory Frequency <667 MHz>
tCL <5>
tRCD <5>
tRP <5>
tRASmin <15>
Memory Voltage <Automatic>


Memory configuration was all on default.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3200 Mhz Intel D975XBX v.304 e-GeForce 7900 GT KO 4BG OCZ DDR2 PC2-5400/667MHz 
Hard DriveOSMonitorPower
SATA 500GB Maxtor RAID 0 Windows XP pro sp2 NEC Opticlear 90GX2 Antec Neo HE 550 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3200 Mhz Intel D975XBX v.304 e-GeForce 7900 GT KO 4BG OCZ DDR2 PC2-5400/667MHz 
Hard DriveOSMonitorPower
SATA 500GB Maxtor RAID 0 Windows XP pro sp2 NEC Opticlear 90GX2 Antec Neo HE 550 
  hide details  
Reply
post #4 of 23
If you leave your RAM all default, you'll eventually run into problams. Much like you have now. As you increase the FSB for your processor, you're also increasing the speed at which your RAM operates at. Easy way to solve this, is either select a frequency one or two steps below it's norm(I.E. instead of 667, try 533 or even 400), or increase the voltage for your memory.
post #5 of 23
Try this dude.

400 x 9

Mem timings - 4-4-4-12, 2.1v

Memory at 1:1. Choose the 800 mhz option

Disable all the settings, i.e C1E, Vanderpool, etc

CPU Vcore - 1.45v

Put all the other voltage settings up one notch apart from FSB Termination, put that up two notches.
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
post #6 of 23
Quote:
Originally Posted by Joeking78 View Post
Try this dude.

400 x 9

Mem timings - 4-4-4-12, 2.1v

Memory at 1:1. Choose the 800 mhz option

Disable all the settings, i.e C1E, Vanderpool, etc

CPU Vcore - 1.45v

Put all the other voltage settings up one notch apart from FSB Termination, put that up two notches.
He's using the same cooler as me. I'm not sure if he'll want to use 400x9 with the Z9500. At least not for anything long term.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 8700k z370 gaming 7 evga 980 ti 32 Corsair 3200 
Hard DriveOptical DriveOSMonitor
samsung 950 HP dual layer Windows 7 64 27 dell ips  
KeyboardPowerCaseMouse
G15 1050 evga corsair 540 air G900 
Mouse Pad
generic 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 8700k z370 gaming 7 evga 980 ti 32 Corsair 3200 
Hard DriveOptical DriveOSMonitor
samsung 950 HP dual layer Windows 7 64 27 dell ips  
KeyboardPowerCaseMouse
G15 1050 evga corsair 540 air G900 
Mouse Pad
generic 
  hide details  
Reply
post #7 of 23
I thought the Zalman CNPS9500 was a fairly good cooler.

Anyway, he could try 400 x 8 for 3200mhz with 1.35-1.4v
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
post #8 of 23
Thread Starter 
Quote:
Originally Posted by Joeking78 View Post
Try this dude.

400 x 9

Mem timings - 4-4-4-12, 2.1v

Memory at 1:1. Choose the 800 mhz option

Disable all the settings, i.e C1E, Vanderpool, etc

CPU Vcore - 1.45v

Put all the other voltage settings up one notch apart from FSB Termination, put that up two notches.

I try your setting now it boot up but screen blank..... I have to reset the CMOS.

My cooler is 9700 just changed it today.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3200 Mhz Intel D975XBX v.304 e-GeForce 7900 GT KO 4BG OCZ DDR2 PC2-5400/667MHz 
Hard DriveOSMonitorPower
SATA 500GB Maxtor RAID 0 Windows XP pro sp2 NEC Opticlear 90GX2 Antec Neo HE 550 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6600 @ 3200 Mhz Intel D975XBX v.304 e-GeForce 7900 GT KO 4BG OCZ DDR2 PC2-5400/667MHz 
Hard DriveOSMonitorPower
SATA 500GB Maxtor RAID 0 Windows XP pro sp2 NEC Opticlear 90GX2 Antec Neo HE 550 
  hide details  
Reply
post #9 of 23
Try 350 x 9

I have no experience with your mobo but it might not be that great an overclocker.
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
New Build
(10 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i7-4930k @ 4.5ghz, 1.215v Asus Rampage IV Formula Gigabyte 780 TI OC @ 1295/7400 Gigabyte 780 TI OC @ 1295/7400 
RAMHard DriveOSMonitor
Corsair Dominator Platinum @ 2133 9-10-10-24, 2T 2x Corsair GS 120gb SSD Windows 8 QNIX QX2710 Evolution ll @ 120hz 
PowerCase
Seasonic 1250W Corsair Vengeance C70 
  hide details  
Reply
post #10 of 23
I heard that mobo wasn't a great overclocker but it should be decent enough to get a little something.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 8700k z370 gaming 7 evga 980 ti 32 Corsair 3200 
Hard DriveOptical DriveOSMonitor
samsung 950 HP dual layer Windows 7 64 27 dell ips  
KeyboardPowerCaseMouse
G15 1050 evga corsair 540 air G900 
Mouse Pad
generic 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 8700k z370 gaming 7 evga 980 ti 32 Corsair 3200 
Hard DriveOptical DriveOSMonitor
samsung 950 HP dual layer Windows 7 64 27 dell ips  
KeyboardPowerCaseMouse
G15 1050 evga corsair 540 air G900 
Mouse Pad
generic 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › This overclocking doesn't look right