Overclock.net › Forums › Cooling › Water Cooling › NZXT Switch 810 - Re-doing the whole loop
New Posts  All Forums:Forum Nav:

NZXT Switch 810 - Re-doing the whole loop - Page 2

post #11 of 23
I was thinking like 2 of these


And then have the tube go in the bottom somewhere and out the hole to the right of the 24 pin. Really depends on how you have your cables routed back there.
See Pee Yoo
(17 items)
 
Lian Mi
(12 items)
 
Craptop
(5 items)
 
CPUMotherboardGraphicsRAM
2500k asrock extreme4 980ti corsair vengeance  
Hard DriveHard DriveOptical DriveCooling
Crucial m3 seagate green lg dvdrw Noctua D14 
OSMonitorMonitorPower
win 7 64bit 2 x 1920 x 1080p (ASUS and LG) xl2420te ocz zx 1000w 
CaseMouseMouse PadAudio
haf bx g600 / / Roccat Savu Puretrak Talent Soundblaster Z 
Audio
sennheiser hd558 
CPUMotherboardRAMHard Drive
celereon g1610 g1 sniper m3 parema seagate barracuda 
Optical DriveOSMonitorPower
dvdrw windows vista vizio 3d tv rosewill green 530 
CaseMouse
lian li pc v354b logitech g300 
CPUGraphicsHard DriveOS
4810MQ GTX 870M samsung evo  Windows 8.1 
Other
Sager 8728 
  hide details  
Reply
See Pee Yoo
(17 items)
 
Lian Mi
(12 items)
 
Craptop
(5 items)
 
CPUMotherboardGraphicsRAM
2500k asrock extreme4 980ti corsair vengeance  
Hard DriveHard DriveOptical DriveCooling
Crucial m3 seagate green lg dvdrw Noctua D14 
OSMonitorMonitorPower
win 7 64bit 2 x 1920 x 1080p (ASUS and LG) xl2420te ocz zx 1000w 
CaseMouseMouse PadAudio
haf bx g600 / / Roccat Savu Puretrak Talent Soundblaster Z 
Audio
sennheiser hd558 
CPUMotherboardRAMHard Drive
celereon g1610 g1 sniper m3 parema seagate barracuda 
Optical DriveOSMonitorPower
dvdrw windows vista vizio 3d tv rosewill green 530 
CaseMouse
lian li pc v354b logitech g300 
CPUGraphicsHard DriveOS
4810MQ GTX 870M samsung evo  Windows 8.1 
Other
Sager 8728 
  hide details  
Reply
post #12 of 23
Well, if you have the space in the back, go for it. thumb.gif
Is It Done Yet?
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 6600K (4.8Ghz) ASUS Maximus VIII Gene ASUS STRIX GTX 1080 16GB GSkill TridentZ 3200Mhz 
Hard DriveCoolingPowerCase
Samsung 840 Pro (256GB) Corsair H100i V2 EVGA Supernova G2 750W Fractal Design Define S 
  hide details  
Reply
Is It Done Yet?
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 6600K (4.8Ghz) ASUS Maximus VIII Gene ASUS STRIX GTX 1080 16GB GSkill TridentZ 3200Mhz 
Hard DriveCoolingPowerCase
Samsung 840 Pro (256GB) Corsair H100i V2 EVGA Supernova G2 750W Fractal Design Define S 
  hide details  
Reply
post #13 of 23
TUBING IS PRETTY, that is all. biggrin.gif
Gaming
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 3500k @ 4.6 1.25v Z77A-GD65 (MS-7751) Asus GTX 770 SLI Asus GTX 770 
RAMHard DriveHard DriveOptical Drive
Corsair Vengeance DDR3 1600 Samsung 840 Sandisk Ultra Plus Pioneer DVD 
CoolingOSMonitorPower
Cooler Master 212 EVO Windows Ultimate 64 Qnix QX2710 Cooler Master V700 
CaseMouseMouse PadAudio
NZXT Phantom 630 Razor Deathadder Roccat Taito Asus Xonar DSX 
Other
Logitech Z5300E 
  hide details  
Reply
Gaming
(17 items)
 
  
CPUMotherboardGraphicsGraphics
Intel 3500k @ 4.6 1.25v Z77A-GD65 (MS-7751) Asus GTX 770 SLI Asus GTX 770 
RAMHard DriveHard DriveOptical Drive
Corsair Vengeance DDR3 1600 Samsung 840 Sandisk Ultra Plus Pioneer DVD 
CoolingOSMonitorPower
Cooler Master 212 EVO Windows Ultimate 64 Qnix QX2710 Cooler Master V700 
CaseMouseMouse PadAudio
NZXT Phantom 630 Razor Deathadder Roccat Taito Asus Xonar DSX 
Other
Logitech Z5300E 
  hide details  
Reply
post #14 of 23
Thread Starter 
I'm going to try both ways, first I'll see if I can fit the tubing behind the motherboard, if it doesn't, I'll stick to my current loop design. tongue.gif
post #15 of 23
Quote:
Originally Posted by kcuestag View Post

Hello,

Since I'm going to replace my red tubing for clear tubing (and smaller, going from 19/13 to 16/11) nd Mayhems Pastel White as coolant in the next week or two, I thought I'd re-do my loop, as the huge tubing length from the bottom radiator to the bay reservoir kind of drives me nuts. Do you guys know if 16/11mm tubing will fit fine behind the motherboard's tray/panel of this case?

Here's current build:




I want to get rid of that long tube from the bottom radiator to the bay reservoir, and I think best way of doing that would be routing the tubing from bottom rad behind the motherboard and up to the reservoir, where all the PSU cables are hidden.

You think that tubing will fit? Anyone done this before?

I'm open for suggestions to re-do my loop. Keep in mind the top radiator can not be moved to have fittings looking to the rear of the case as it doesn't fit that way (Hits again'st the motherboard's I/O ports), plus the route from reservoir/pump to top radiator is quite short and clean, I like it:
Warning: Spoiler! (Click to show)



This is not a huge change for the loop, the only thing I really want to change is that long tubing from the Monsta to the reservoir, and I had some nice ideas from nleksan, I'm wondering if you guys have seen other NZXT Switch 810 owners doing this and if it would fit fine.


Many thanks in advance. smile.gif

Are you running intake fans for the top Rad? (intake air from outside through the Rad)
My system
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5820K 6core Asus X99-A Asus GTX 970 4x4 16g DDR4 
Hard DriveOptical DriveCoolingOS
2 x WD 500Gb Caviar Black Raid 0 LG DVD Burner Swiftech H240X Windows 10 64bit 
MonitorKeyboardPowerCase
Dell 30" U3014 Monitor Logitech G910 Enermax Galaxy DXX 850W NZXT Switch 810 
MouseMouse Pad
Logitech G502 Roccat Sense 
  hide details  
Reply
My system
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5820K 6core Asus X99-A Asus GTX 970 4x4 16g DDR4 
Hard DriveOptical DriveCoolingOS
2 x WD 500Gb Caviar Black Raid 0 LG DVD Burner Swiftech H240X Windows 10 64bit 
MonitorKeyboardPowerCase
Dell 30" U3014 Monitor Logitech G910 Enermax Galaxy DXX 850W NZXT Switch 810 
MouseMouse Pad
Logitech G502 Roccat Sense 
  hide details  
Reply
post #16 of 23
Thread Starter 
Quote:
Originally Posted by jincuteguy View Post

Are you running intake fans for the top Rad? (intake air from outside through the Rad)

Yes, all 3 140mm fans on the top rad are intaking, to make sure case has positive pressure, I had them as exhaust before and it made negative pressure so dust would enter the case from behind (In the pcie covers).

Now instead, whatever dust gets inside goes back outside. tongue.gif
post #17 of 23
Quote:
Originally Posted by kcuestag View Post

Yes, all 3 140mm fans on the top rad are intaking, to make sure case has positive pressure, I had them as exhaust before and it made negative pressure so dust would enter the case from behind (In the pcie covers).

Now instead, whatever dust gets inside goes back outside. tongue.gif

I thought you would get more dust if you set the fans as intake from the top? I have a 240m Rad from my new Silverstone TD-02 cooler, do you think I should switch it to intake? Right now Im having the fans as exhaust through the top of my NZXT 810. And also is your 120mm Rad the only one that is exhausting out?
My system
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5820K 6core Asus X99-A Asus GTX 970 4x4 16g DDR4 
Hard DriveOptical DriveCoolingOS
2 x WD 500Gb Caviar Black Raid 0 LG DVD Burner Swiftech H240X Windows 10 64bit 
MonitorKeyboardPowerCase
Dell 30" U3014 Monitor Logitech G910 Enermax Galaxy DXX 850W NZXT Switch 810 
MouseMouse Pad
Logitech G502 Roccat Sense 
  hide details  
Reply
My system
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 5820K 6core Asus X99-A Asus GTX 970 4x4 16g DDR4 
Hard DriveOptical DriveCoolingOS
2 x WD 500Gb Caviar Black Raid 0 LG DVD Burner Swiftech H240X Windows 10 64bit 
MonitorKeyboardPowerCase
Dell 30" U3014 Monitor Logitech G910 Enermax Galaxy DXX 850W NZXT Switch 810 
MouseMouse Pad
Logitech G502 Roccat Sense 
  hide details  
Reply
post #18 of 23
Thread Starter 
Quote:
Originally Posted by jincuteguy View Post

I thought you would get more dust if you set the fans as intake from the top? I have a 240m Rad from my new Silverstone TD-02 cooler, do you think I should switch it to intake? Right now Im having the fans as exhaust through the top of my NZXT 810. And also is your 120mm Rad the only one that is exhausting out?

Forgot to mention, I have 3x 140mm Silverstone Magnetic filters, so no dust gets inside at all. smile.gif

Set it as intake if you can get some filters (The Silverstone Magnetic filters are awesome), if not, leave it as exhaust. My 120mm is indeed the only exhaust in the case. thumb.gif
post #19 of 23
Hey bud, thanks for the shout-out! thumb.gif


Sitting here looking at my Switch 810 (which, btw, now that you've added the white BitFenix Alchemy cables, makes your rig look suspiciously familiar tongue.gif ), and the easiest way I can see would be this:

Have the GPU go the "forward" port on top the bottom radiator (closest to window)
Use a pair of 90deg single-rotary angled adapters on the "back" rad fitting aka output so that the first is pointing towards the MB tray and the second is connected to it and actually pointing towards the front of the case
Run the tubing behind the radiator and then angle it upward where the empty space is from having removed the bottom HDD cage
Remove the back tray side's top 5.25" bay side cover
Use a 90/180snake rotary fitting or something here to allow the tubing to go from the side of the 5.25 bays into them and connect to the bay res

That seems to me to be the easiest approach while also utilizing the area "behind the MB Tray" with the most actual room. I just held some of my 1/2x3/4 Primochill Advanced there and it fits with room to spare biggrin.gif
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #20 of 23
BLUE = Fittings
BLACK LINES = Rough Idea of Where Components Are on Other Side of Panel
PINK = Tubing






(Old picture, so apologize for the mess back there!)
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › NZXT Switch 810 - Re-doing the whole loop