Overclock.net › Forums › Consumer Electronics › Home Audio › AVR setup stopped working all of a sudden
New Posts  All Forums:Forum Nav:

AVR setup stopped working all of a sudden

post #1 of 3
Thread Starter 
I have a H/K AVR 1565 with an xbox 360, apple tv, and comcast hd cable box (RNG150) going into it - with one HDMI output to the TV. Everything has been working 100% fine for like the past year. Yesterday all of a sudden my cable went out, and I didn't think anything of it until I realized it was only this specific TV. Now here's the weird part, all of the inputs on the TV and receiver work 100% as they should. I even switched the inputs around and everything was fine. Except whenever it is set to the cable box there is no video or audio. The TV as well as the receiver both report no signal. So I figured the cable box was busted, until I plugged it into one of the tv's downstairs and it worked perfectly. Then I brought it back upstairs and instead of running it through the receiver I ran it straight into the tv and it works fine. Plugged it back into the receiver and it doesn't work. What could possibly be the problem? I'm stumped. I don't think its the receiver as all of the inputs work fine with everything else but I don't know what else it could be. Have switched HDMI cables too without luck. Thanks
Macbook Retina
(5 items)
 
  
CPUGraphicsRAMHard Drive
i7-4870HQ  GT 750M 16GB DDR3 512GB SSD 
  hide details  
Reply
Macbook Retina
(5 items)
 
  
CPUGraphicsRAMHard Drive
i7-4870HQ  GT 750M 16GB DDR3 512GB SSD 
  hide details  
Reply
post #2 of 3
I've seen individual inputs on recievers go out before, and it sounds like that could be the problem.

Have you tried the cable box on another input, or tried a known working device on that same input?

Other than that, I don't know what could really be the problem with this. Just hope its under warranty I guess redface.gif.

Good luck.
post #3 of 3
well it sounds like a misconfigured cable box perhaps??
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Home Audio
Overclock.net › Forums › Consumer Electronics › Home Audio › AVR setup stopped working all of a sudden