Overclock.net › Forums › Cooling › Water Cooling › How is this water cooling setup?
New Posts  All Forums:Forum Nav:

How is this water cooling setup?

post #1 of 2
Thread Starter 
I have been posting on this site for a little bit, and you guys have been a great help. If you could help me on this, it would be great.

How is this for a CPU + GPU loop

Water Block - http://www.frozencpu.com/products/16252/ex-blc-1132/EK_Supremacy_Universal_CPU_Liquid_Cooling_Block_-_Nickel_EK-Supremacy_-_Nickel.html?tl=g30c325s842

Rad - 1x http://www.frozencpu.com/products/8522/ex-rad-145/XSPC_RX240_Dual_120mm_Radiator.html?tl=g30c95s160

1x http://www.frozencpu.com/products/4083/ex-rad-84/Black_Ice_GT_Stealth_240_Radiator_-_Black.html?tl=g30c95s160 (the stryker does not support top rads larger than 50mm thick

reservoir - http://www.frozencpu.com/products/6472/ex-res-129/XSPC_Dual_525_Bay_Reservoir_-_Black_-_Ball_Front_BR525DBW.html?tl=g30c97s168#blank

pump - http://www.frozencpu.com/products/2128/ex-pmp-27/Swiftech_MCP655-B_12v_Water_Pump_w_38_Conversion_Kit_317_GPH.html?tl=g30c107s1802

gpu block - http://www.frozencpu.com/products/15577/ex-blc-1081/EK_Radeon_HD_7950_VGA_Liquid_Cooling_Block_-_Acetal_Electroless_Nickel_Plated_EK-FC7950_-_AcetalEN_Nickel.html?tl=g30c309s1626

All w/ 1/2" ID compression fittings, and some white ( for part of cpu loop) and red ( for part of gpu loop) primochill tubing.

btw i know thats a 7950 block, im getting one and giving my 7850 to my brother.

All of this going into the CM Storm Stryker!
post #2 of 2
The only suggestion I can add is to swap your pump out for this, its the same version just G1/4 tapped with compression fittings instead of the barb fittings. Also the inlet and outlet ports are bored out for less resistance.



MCP655 Vario

If you can spend the extra cash, definitely go with either the PWM or Vario version, the -B version is locked onto the 4th speed and cant be changed.

Other than that it seems like a solid build, just need tubing, fluid, and fittings for everything.

Also check, double check, and triple check your clearances with the case. I dunno the storm stryker very well personally but getting the dimensions of the rads off the websites and grabbing your handy ruler will always alleviate most clearance dilemmas.

Also, post pics of your build whenever you get around to it, would like to see biggrin.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › How is this water cooling setup?