Overclock.net › Forums › Cooling › Water Cooling › Suitable rads for DimasTech Bench Table Easy V3.0
New Posts  All Forums:Forum Nav:

Suitable rads for DimasTech Bench Table Easy V3.0

post #1 of 2
Thread Starter 
Hi all,

I'm thinking of building a SB-E (or maybe IB-E if the CPU's don't suffer from the same heat issues as IB / Haswell). I'd like to build something on the DimasTech Easy 3.0 bench and fit it with a couple of 360 rads to cool the CPU and Mobo. My question is, how wide can my 360 rads be and still accommodate one set of fans in push config and allow space for the PSU, HDD, pump mount and other trays that sit in the base of the bench. I was looking at the Alphacool NexXxoS Monsta 360mm which is some 84mm wide.

Can anyone offer any advice or tell me what rads they have used?

Many thanks!
post #2 of 2
Thread Starter 
For info, I have received an answer from DimasTech and they have stated there is 92mm clearance either side. Anything up to 60mm is going to be ideal!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Suitable rads for DimasTech Bench Table Easy V3.0