Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners
New Posts  All Forums:Forum Nav:

[Official] Case PHANTEKS Case Club for lovers & owners - Page 1399

post #13981 of 19221
Quote:
Originally Posted by ciarlatano View Post


I agree with @PureBlackFire. The Evolv ATX had much better airflow than the H440 when I tested them.

Quote:
Originally Posted by PureBlackFire View Post

this person seems happy with the switch. even mentions better airflow and temps. I know the cpu temp should be better. the H440's top exhaust with a radiator sucks. I switched from H440 to the Luxe mainly for that reason.

Thanks for the feedback and help! Gone ahead and ordered the Phantek Galaxy Silver TG.

Regarding cooling, currently I have the Kraken X61 in push configuration in my H440 on top. Would that be the same config that works best for the Evolve ATX?

Also, any other good fans that I need to order/upgrade in the case for better cooling?
post #13982 of 19221
Quote:
Originally Posted by Alias View Post


Thanks for the feedback and help! Gone ahead and ordered the Phantek Galaxy Silver TG.

Regarding cooling, currently I have the Kraken X61 in push configuration in my H440 on top. Would that be the same config that works best for the Evolve ATX?

Also, any other good fans that I need to order/upgrade in the case for better cooling?

The funny part of this....the case comes with fans that many upgrade to, the F140SP. You will be very hard pressed to find a better fan in that application.

Yes, same config in the Evolv, the radiator must be isolated as previously mentioned.
post #13983 of 19221
I am about to start a large build using the Pro-M but I really need some final guidance on the radiator support. I have watched a few videos and looked at some builds others have done in this case and the Evolve ATX. I found I can fit AP-15's on the top of the radiator bracket to allow for push pull. My question is that can I fit an XT45 or another 45mm radiator on the top and the front and not block the cpu water block on the top and prevent myself from using as tube rad on the front?

Any push/pull builds with these cases are greatly appreciated for reference!
Zaxbuild Mk II
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500k Asus P67 WS Revolution EVGA GTX 670 SC 4GB 2x4gb G.Skill Rip Jaws CL6 
Hard DriveOptical DriveCoolingOS
Crucial M4 128gb & Crucial C300 60gb SSD & 2x 1... Asus 24x CD/DVD-RW XSPC RASA 240 Kit Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
4 x ASUS VN247H-P's in Surround + Accessory Logitech G15 Corsair HX750 NZXT Phantom-White 
MouseMouse PadAudio
Logitech G5 Razer Kabuto Asus Xnonar DX 
  hide details  
Reply
Zaxbuild Mk II
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2500k Asus P67 WS Revolution EVGA GTX 670 SC 4GB 2x4gb G.Skill Rip Jaws CL6 
Hard DriveOptical DriveCoolingOS
Crucial M4 128gb & Crucial C300 60gb SSD & 2x 1... Asus 24x CD/DVD-RW XSPC RASA 240 Kit Windows 7 Pro 64bit 
MonitorKeyboardPowerCase
4 x ASUS VN247H-P's in Surround + Accessory Logitech G15 Corsair HX750 NZXT Phantom-White 
MouseMouse PadAudio
Logitech G5 Razer Kabuto Asus Xnonar DX 
  hide details  
Reply
post #13984 of 19221
Quote:
Originally Posted by Zaxbys View Post

I am about to start a large build using the Pro-M but I really need some final guidance on the radiator support. I have watched a few videos and looked at some builds others have done in this case and the Evolve ATX. I found I can fit AP-15's on the top of the radiator bracket to allow for push pull. My question is that can I fit an XT45 or another 45mm radiator on the top and the front and not block the cpu water block on the top and prevent myself from using as tube rad on the front?

Any push/pull builds with these cases are greatly appreciated for reference!

I don't know if you can fit anything on top of the bracket in the Pro M, it isn't as tall as the Evovlv ATX. here are some builds with moderately thick rads though, might help:

https://pcpartpicker.com/b/dKWXsY
https://pcpartpicker.com/b/LMhqqs
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770K @ 4.7ghz Gigabyte Z87X-UD4H EVGA GTX 980TI ACX 2.0  8GB G.Skill Trident X 2400 mhz 
Hard DriveHard DriveHard DriveCooling
Samsung 830 SSD 128GB 3TB Toshiba  3TB Toshiba Custom Water 
OSMonitorPowerCase
Window 7 Ultimate 64 bit HP 23xi Corsair HX750i Phanteks Enthoo Luxe 
Mouse
Logitech G600 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770K @ 4.7ghz Gigabyte Z87X-UD4H EVGA GTX 980TI ACX 2.0  8GB G.Skill Trident X 2400 mhz 
Hard DriveHard DriveHard DriveCooling
Samsung 830 SSD 128GB 3TB Toshiba  3TB Toshiba Custom Water 
OSMonitorPowerCase
Window 7 Ultimate 64 bit HP 23xi Corsair HX750i Phanteks Enthoo Luxe 
Mouse
Logitech G600 
  hide details  
Reply
post #13985 of 19221
Thread Starter 
I see Phanteks has now released
Phanteks’ RGB LED Strip Combo Set, RGB LED Strip 400MM
and Extension Cable Combo Set
lighting.
Info said "Available in June". They don't have much time left. biggrin.gif

Edited by doyll - 6/30/16 at 2:58am
post #13986 of 19221
Quote:
Originally Posted by doyll View Post

I see Phanteks has now released
Phanteks’ RGB LED Strip Combo Set, RGB LED Strip 400MM
and Extension Cable Combo Set
lighting.
Info said "Available in June". They don't have much time left. biggrin.gif

I wonder if there is a cost effective way for them to make these with USB interface and control. It would open up their market quite a bit for these.
post #13987 of 19221
Quote:
Originally Posted by doyll View Post

I see Phanteks has now released
Phanteks’ RGB LED Strip Combo Set, RGB LED Strip 400MM
and Extension Cable Combo Set
lighting.
Info said "Available in June". They don't have much time left. biggrin.gif

Aura compatible as well. biggrin.gif
My latest Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700 AsRock X370 TaiChi EVGA GTX 1080 ACX 3.0 G.Skill 32MB 3200mhz DDR4 
Hard DriveHard DriveCoolingCooling
Samsung EVO 500GB SSD Samsung EVO Pro 512MB M2 Drive XSPC Raystorm Pro AlphaCool ST30 360 
CoolingOSMonitorKeyboard
Corsair SP120 x6 push/pull Windows 10 Acer Predator X34 Corsair K70 RGB 
PowerCaseMouseMouse Pad
Corsair AX1200 Inwin 909 Logitech G502 Proteus Spectrum Corsair MM300 
  hide details  
Reply
My latest Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700 AsRock X370 TaiChi EVGA GTX 1080 ACX 3.0 G.Skill 32MB 3200mhz DDR4 
Hard DriveHard DriveCoolingCooling
Samsung EVO 500GB SSD Samsung EVO Pro 512MB M2 Drive XSPC Raystorm Pro AlphaCool ST30 360 
CoolingOSMonitorKeyboard
Corsair SP120 x6 push/pull Windows 10 Acer Predator X34 Corsair K70 RGB 
PowerCaseMouseMouse Pad
Corsair AX1200 Inwin 909 Logitech G502 Proteus Spectrum Corsair MM300 
  hide details  
Reply
post #13988 of 19221
Hey guys, maybe someone can shed some insight. I am running into some issues mounting an EK XRES 140 D5 pump res combo to my Evolv ATX TG. The bracket that came with the pump does not allign anywhere on the case. And the bracket that came with the case, I am not too sure how it even helps mount a vertical pump/res. What I did right now is extended a hole that was in place with my drill and mounted with the EK bracket, but I feel like this is not a permanent solution especially if I decide to upgrade the Reservoir tube size in the future. Any thoughts? All i have is a simple CPU loop and I am having issues figuring out what the best way to mount everything is. I think My 295x2 is part of the problem.
post #13989 of 19221
Forgot to mention that I have a single 240 Radiator.
post #13990 of 19221
Quote:
Originally Posted by ciarlatano View Post

Quote:
Originally Posted by doyll View Post

I see Phanteks has now released
Phanteks’ RGB LED Strip Combo Set, RGB LED Strip 400MM
and Extension Cable Combo Set
lighting.
Info said "Available in June". They don't have much time left. biggrin.gif

I wonder if there is a cost effective way for them to make these with USB interface and control. It would open up their market quite a bit for these.

There is: https://www.amazon.com/StarTech-Motherboard-4-Pin-Header-USBMBADAPT/dp/B000IV6S9S/ref=sr_1_1?ie=UTF8&qid=1467297134&sr=8-1&keywords=USB+to+4+pin

But I'm guessing the software won't work with this.
Monolith
(22 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen Threadripper 1920x 12-Core Processor ASUS ROG Zenith Extreme EVGA GeForce GTX 1080 Ti SC Black Edition G.Skill TridentZ RGB 4266 DDR4 F4-4266C19D-16GTZR  
Hard DriveHard DriveHard DriveCooling
Samsung 960 Pro Seagate ST6000NM0044 6TB Enterprise HDD Samsung 850 EVO Be Quiet! Silent Wings 3 120mm (10) 
CoolingCoolingCoolingCooling
XSPC RX480 V3 Hardware Labs Nemesis 360 GTS XSPC Raystorm NEO XSPC Razor RGB 
CoolingOSMonitorKeyboard
XSPC Photon D170 V2 Microsoft Windows 10 3 x Dell U2412M 1920x1200 G.Skill KM780R RGB Mechanical Keyboard 
PowerCaseMouseAudio
EVGA SuperNOVA 1600 P2 220-P2-1600-X1  Lian Li PC-V3000 Logitech G502 Proteus Spectrum Schiit Modi 2 DAC 
AudioAudio
Schiit Magni 2 Uber Amp Beyerdynamic DT 880 Premium 600 OHM Headphones  
  hide details  
Reply
Monolith
(22 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen Threadripper 1920x 12-Core Processor ASUS ROG Zenith Extreme EVGA GeForce GTX 1080 Ti SC Black Edition G.Skill TridentZ RGB 4266 DDR4 F4-4266C19D-16GTZR  
Hard DriveHard DriveHard DriveCooling
Samsung 960 Pro Seagate ST6000NM0044 6TB Enterprise HDD Samsung 850 EVO Be Quiet! Silent Wings 3 120mm (10) 
CoolingCoolingCoolingCooling
XSPC RX480 V3 Hardware Labs Nemesis 360 GTS XSPC Raystorm NEO XSPC Razor RGB 
CoolingOSMonitorKeyboard
XSPC Photon D170 V2 Microsoft Windows 10 3 x Dell U2412M 1920x1200 G.Skill KM780R RGB Mechanical Keyboard 
PowerCaseMouseAudio
EVGA SuperNOVA 1600 P2 220-P2-1600-X1  Lian Li PC-V3000 Logitech G502 Proteus Spectrum Schiit Modi 2 DAC 
AudioAudio
Schiit Magni 2 Uber Amp Beyerdynamic DT 880 Premium 600 OHM Headphones  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Case PHANTEKS Case Club for lovers & owners